balthzar

Development log

		Information: - Current Balthzar main version is 24.1.x . Additional development and bug-fixes will be deliverered within this version. - Below is a compressed information on new development and bugfixes with newest changes on top. - For more information, please read "help text" section inside Balthzar Client. - For support, please contact balthzarsupport@delacroy.se or dial +46 (0)371 83 830.

Number	ReleaseDate	Application	Heading/Details	Publisher	Project	ZohoRef	Delete

2059	2024-04-19 14:03:22	Client	24.3.0 - ERP scrap-reason	JB		Asana
			A new alternative scrapcode called erp_scrap_reason has been introduced in Admin for scrapreasons. The idea is that this field can be used to map scrapreasons in Balthzar to those in the ERP system. This enables multiple scrapreasons in Balthzar to be reported as a generic scrapcode in the erpsystem, if that is a requested beaviour.
2058	2024-04-18 14:10:38	Client	24.3.0 - Formula evaluator	JB		Asana
			As of this version, a new functionality has been added to Processvalues --> Data collecting -->Formula which makes it possible to test out formulas given userconfigured values.
2057	2024-04-17 16:12:44	Etouch	24.3.0 - Extension of SF367 (Labels via NiceLabel)	JB		Asana
			Specialfunction 367 has been adjusted to prevent the start of workorders with operation 10, if no following operation has been planned. Workorders using other operationnumbers are treated according to previous logic.
2056	2024-04-17 16:10:56	Client	24.3.0 - Scrap cycles - processvalues	JB		Asana
			A new settings has been added in Admin for processvalues, enabling scrapregistrations to be done via the formula <number of cycles to scrap> * (cavities - cavityreduction)
2055	2024-04-10 15:07:24	Client	24.3.0 - Extended, userdefined information, WO-texts (SF102)	JB		Asana
			As of this version, a value can be configured in Generic companysettings that points to a link which contains machinesettings. These machinesettings are then added to the text shown by the SF102 (Show WO-texts). This link can be configured to be used by a specific machine or as a generic link for all machines which does not have a specifically configured link.
2054	2024-04-03 17:16:04	Client	24.3.0 - New default layout, Messagegroups	JB		Asana
			If no personal or standard layout was saved previously, a new standardized layout will be presented which has the searchfield enabled in Admin for Messagegroups
2053	2024-04-03 17:12:58	Client	24.3.0 - Valid until date, new setting in Admin for Users	JB		Asana
			As of this version, a date can be set for a specific user which limits usage. After the set date has passed, every login attempt will be blocked. Not setting this date is considered as not using the block at all, allowing logins on previous conditions.
2051	2024-03-22 14:54:51	Client	24.3.0 - Extended searchcapabilities, manually linked documents	JB		Asana
			As of this version, each condition available in Admin Manually linked documents, can now be searched via the search bar, via new added columns called Listed partnumber/machineID/zoneID/deparmentID and so on.
2045	2024-03-21 11:49:31	Web	24.2.0 - Korrigering av specialfunktion 367	JH
			Korrigerat vilka f�lt i monitor som motsvarar antal per etikett och antal per pallflagga.
2052	2024-03-21 11:49:31	Client	24.2.3 - Shift handover	PJ		Asana
			It is now possible to prevent signing of the shift handover report i there are uncoded stops under the interval that the report was run
2044	2024-03-21 11:47:39	Client	24.2.0 - Starta via artikel fr�n processv�rde	JH
			Numera kan man via ett processv�rde starta en artikel p� en maskin. Funktionen ser till att den artikeln k�rs p� maskinen och avslutar alla andra.
2049	2024-03-21 11:42:13	Client	24.2.0 - Korrigerat orderstart via artikel och verktyg	JH
			Om man startar via artikel kommer numera tillh�rande verktyg f�r den artikeln tas med.
2041	2024-03-21 10:31:38	Web	24.2.0 - Interna aktiviteters beteende efter inmatat v�rde �r uppdaterat	EH		Asana
			Interna aktiviteters beteende n�r v�rden �r ifylllda �r nu mycket mer logiska och mindra ryckiga.
2040	2024-03-21 10:30:49	Web	24.2.0 - Ut�kat antal knapar p� flexwidgeten	EH		Asana
			Om flexwidgeten �r stor s� fyllas hela widgeten med knappar.
2039	2024-03-21 10:22:53	Web	24.2.0 - Kassationsvisualisering	EH		Asana
			Lagt till Kassationsvisualisering i datavisualiseringsfilken
2035	2024-03-21 10:21:16	Web	24.2.0 - L�nk knapp till Stopphistorik i flex widgeten	EH		Asana
			Nu finns l�nk till StoppHistorik som knapp i flexwidgeten
2038	2024-03-21 10:19:53	Web	24.2.0 - �teruppta st�ll knapp i flex-widget	EH		Asana
			Nu finns �teruppta st�ll som val i flexwidgeten
2036	2024-03-21 10:13:27	Web	24.2.0 - Lagt till SF348 i Bzx21	EH		Asana
			Med denna specialfunktion aktiverad ges m�jligheten att avbryta ett orderavslut, om det skulle visa sig att rapporterat antal inte skulle motsvara det f�rv�ntade antalet
2032	2024-03-21 10:08:34	Web	24.2.0 - SF428 Which warns if there is a difference in the quantity reported from pallet flags	EH		Asana
			With SF428 active a warning appears if the reported quantity from pallet flag differs from the totalt reported quantity.
2042	2024-03-21 09:31:00	Client	24.2.0 - Formler som processv�rden	JH
			�tg�rdat ett problem med att vissa formler ej fungerade.
2031	2024-03-21 09:29:46	Client	24.2.0 - Ny specialfunktion 430	JH
			Specialfunktion 430 �r en ut�kning av specialfunktion 110. Ist�llet f�r att ta med materialnummer och beskrivning vid best�llning av material tas batchnummer med.
2030	2024-03-21 09:28:51	ERP	24.2.0 - Batch-nummer f�r material fr�n SAP	JH
			Ut�kat import av material fr�n SAP s� att batchnummer tas med.
2029	2024-03-21 09:27:44	Client	24.2.0 - Senast import f�r maskin	JH
			Lagt till nytt f�lt f�r att visa n�r senaste importen av ordrar utf�rdes p� en maskin. Obs. endast st�d f�r M3 i dagsl�get.
2028	2024-03-21 09:26:58	ERP	24.2.0 - Ut�kad import mot M3	JH
			Ut�kat s� att upp till 500 ordrar importeras fr�n M3.
2027	2024-03-21 09:22:28	Web	24.2.1 - Maskinspecifika dokument visas utan att order k�rs	JH
			Korrigerat s� att maskinspecifika dokument visas i Bzx21 �ven om ingen tillverkningsorder k�rs.
2026	2024-03-21 09:21:30	Web	24.2.0 - Specialfunktion 367 och 280	JH
			Ut�kat st�d f�r att specialfunktion 280 och 367 �r aktiva samtidigt.
2025	2024-03-21 08:11:01	Client	24.2.0 - Maintmaster	PJ		Asana
			Added maintmaster-integration where we can create internal activities and report them back to maintmaster, we can also report quantity and runtime.
2024	2024-03-21 08:08:39	Client	24.2.0 - Internal activity admin	PJ		Asana
			Fixed issue where admin saved extra line breaks every time an internal activity where saved. This caused problems when activities where copies of eachother.
2023	2024-03-21 08:07:10	Client	24.2.0 - Process logging	PJ		Asana
			In the report Process logging we have now changed the process value selection item, to make it more user friendly
2022	2024-03-21 08:04:46	Client	24.2.0 - Fixed stop note coding	PJ		Asana
			Fixed an issue with coding stops with a stop note, where the note ended on the wrong stop
2021	2024-03-21 06:46:50	Web	24.2.0 - Dashboard media-viewer	FC
			It's now possible to embed video/image elements in dashboards.
2020	2024-03-21 06:45:08	Web	24.2.0 - Dashboard report shower now has a configurable 'new' banner	FC
			In the report shower component of the dashboard it's now possible to show a warning if the file is [n] orders new. If the file is new, a configurable element is added to the document that can be styled by css.
2019	2024-03-21 06:39:27	Web	24.2.0 - Dashboard action button	FC
			Added a component to the new dashboard that sends configurable/promptable data to chosen endpoint.
2018	2024-03-18 17:08:34	Client	24.2.0 - Datamatrix-scanning (SF429)	JB		Asana
			A new specialfunction has been developed which makes verifications of Datamatrix-scans possible.See documentation for further reference.
2017	2024-03-06 15:39:46	Client	24.2.0 - Import of planned orders, M3 (companyID : 5119)	JB		Asana
			A fixed rule has been implemented that only planned orders with a planned startdate of now + 14 days are exported to Balthzar.
2016	2024-03-01 11:38:03	Web	24.2.0 - Last changed date on files	JB		Asana
			When files are read from the filesystem at the IIS-server, the last changed property is now returned, making it possible to use this value for additional logic.
2015	2024-03-01 11:33:38	Etouch	24.1.0 - Mailalerts for material balance errors (Scala)	JB		Asana
			As of version 24.1.0, Balthzar_ERP has been given a new functionality that sends a mail before reporting quantity to the Scala ERP system, thereby preventing faulty reportings before they are performed.
2047	2024-02-19 13:12:46	Client	24.1.0 - Detaljplanering och buntar med specifik storlek	JH
			Lagt till st�d f�r att skapa buntar med specifik storlek.
2014	2024-02-15 16:50:55	Client	24.1.0 - Quantity per package from parts - New SF (426)	JB		Asana
			If this special function is activated, the started workorder will be updated with the value configured in the started parts Quanitty per package-field. See documentation for more information.
2013	2024-02-14 16:26:06	Client	24.1.0 - Maintmaster Admin	EH		Asana
			Additional fields have been added to Admin for Machines and internal activities in order to support MaintMaster integration.
2012	2024-02-13 13:37:08	Etouch	24.1.0 - Additional data at orderstart (Pyramid direct connect)	JB		Asana
			As of v24.1.0 two additional columns are fetched from Pyramid for planned orders, yearly quantity and planned manfactor. Used fields are �PULAGER D18005_�rsvolym and PUSTRKRO�D7120_Artikelkod.
2046	2024-02-13 11:50:53	Client	24.1.0 - Processv�rde och tid mellan f�r�ndringar	JH
			Ny prenumaritonstyp "Tid mellan f�r�ndringar" finns. Detta anv�nds f�r att visa tiden mellan t.ex. tv� cykler.
2011	2024-02-12 10:29:47	Client	24.1.0 - Added Scrapvisualiztion for bzx21 data visualization	EH		Asana
			In bzx21 data visualization it is now possible to select scrap data.
2010	2024-02-12 09:14:39	Web	24.1.0 - SF424 "Show help text in stopreason table" on bzx21	EH		#99745
			Show help text in the stopreason list is no longer standard. If SF424 is active the selection table in stopreason tab at bzx21 will show the helptext in a seperate coulmn.
2009	2024-02-12 08:59:05	Client	24.1.0 - Resume Setup button in flexwidget	EH		#100749
			Added the Resume Setup button i flexwidget.
2008	2024-02-12 08:32:17	Web	24.1.0 - OnHover at P% in overview fix	EH		#99608
			Fixed the loading functionality when hovering over P% at overview in bzx21. Onhover should now load data correct.
2007	2024-02-12 08:30:48	Web	24.1.0 - ScrapGraph Y-axis fix	EH		#98292
			The ScrapGraph in bzx21 now starts at 0%.
2006	2024-02-12 07:59:58	Web	24.1.0 - Number of datapoints shown at availability graph is reduced.	EH		#98292
			Sometimes when the selected timeframe return alot of datapoints the graph looks weird due to an excessive amount of dots in the plot area. This is now fixed
2005	2024-02-08 13:58:58	Client	24.1.0 - Administration of users	JH
			Due to an architectual upgrade administration of users with a client version of before 24.1.0 might no longer be possible. If this is the case please update your client to the correct version.
2003	2024-02-06 14:10:22	Client	24.1.0 - Process values as formula	JH
			There is now a new process value type "Formula" which handles a mathematical expression with other process values as parameters.
2004	2024-02-06 10:30:37	Client	24.1.0 - Reset event flag	JB		Asana
			In v24.1.0 a new button was introduced in Admin for tools that makes it possible to reset the service-event-flag for each servicecounters on tools
2002	2024-02-05 14:24:39	Etouch	24.1.0 - Work_order_pack_qty from parts (SF426)	JB		#102585
			As of v24.1.0 a new specialfunction has been developed which automatically assigns the work_order_pack_qty from Balthzars Parts table (quantity_per_package), to started orders which matches the configured part.
2001	2024-02-05 14:04:10	Client	24.1.0 - Department in admin for tools	JB		Asana
			In previous versions when saving a tools department as All in Admin, and later on editing it, the All value was overwritten since it was not correctly loaded. This could lead to situations with no department attached to tools, effectively making them unuseable. This is now corrected. When registering/updating tools, a pop-up question is shown if department is left empty.
2000	2024-02-05 14:02:34	Client	24.1.0 - Part selection in Internal activities	JB		Asana
			Previously, parts shown in Admin as useable for Internal activities where fetched from Monitor regardless of whether that ERP-system was used or not. That is changed to always use Balthzar instead.
1999	2024-01-17 11:17:25	Client	24.1.0 - SF367:Added shortcut in eTouch	JB		Asana
			As of v24.1.0 a shortcut to the Palletflag printout menuoption has been added to the main menu of eTouch
1998	2024-01-10 10:24:05	Client	24.1.0 - Whitelisted IPs	JB		Asana
			As of version v24.1.0, a new functionality has been added which allows filtering connecting clients to certain IP-numbers by the use of a whitelist.This is done per user.
2048	2024-01-07 13:13:48	Client	23.7.0 - Annan kassationsorsak vid st�ll fr�n processv�rde	JH
			N�r kassation skapas fr�n processv�rde kan man numera v�lja att anv�nda en annan orsak om maskinen �r i s�tll.
1997	2023-12-29 10:51:41	Client	22.8.0 - Pyramid date	JH		Asana
			Adjusted format of date used in ERP Pyramid.
1996	2023-12-29 10:49:21	Client	23.1.0 - Mail from checklist	JH		Asana
			Entered value from a checklist using Yes/No will now correctly be displayed as Yes/No instead of 1/0 in emails.
1995	2023-12-29 10:48:08	Client	23.4.0 - Process values and websockets	JH		Asana
			It is now possible to set on each process value if a change should trigger an event using websockets.
1994	2023-12-29 10:46:03	ERP	23.3.0 - Reporting of scrap to ERP	JH		Asana
			Adjusted issue where failure of reporting one scrap transaction to ERP could prevent all other reportings.
1993	2023-12-29 10:44:48	Client	23.4.0 - Verfiy input against material	JH		Asana
			It is now possible to verfiy the entered value on a checklist against the order material.
1992	2023-12-29 09:06:22	Client	23.4.0 - Unique internal activity	JH		Asana
			An activity can now be flagged as "unique". This means that only one instance of this activity can be active on a machine at any given time.
1990	2023-12-29 08:59:06	Client	23.1.0 - Scrap with response using process values	JH		Asana
			It is now possible to set up a response when using scrap on process values. This is used to write back to the PLC that the scrap was a success (or not).
1991	2023-12-29 08:59:06	Client	23.4.0 - Added support to certify internal activities	JH		Asana
			It is now possible to certify cancelled internal activities. By doing this you may enter a reason of why it is cancelled or you may revert the cancellation status.
1989	2023-12-29 08:46:34	Client	23.5.0 - Import all material on specific operation using Dynamics 635	JH		Asana
			Added support to import all materials to operation 20 in balthzar regardless of where it was planned in Dynamics 365.
1988	2023-12-29 08:45:03	Client	23.5.0 - Calculation of A% and machines with "Only manual quantity"	JH		Asana
			Adjusted issue where a combination of a machine using "Only manual quantity" and not being a "Manual machine" could result in wrong A%.
1987	2023-12-29 08:43:33	Client	23.5.0 - QuickLabs 2023.1	JH		Asana
			We now support the usage of QuickLabs 2023.1 This will most notably increase performance using OPC-UA.
1986	2023-12-29 08:41:32	Status	23.5.0 - Automatic order start using SF283 in combination with SF357	JH		Asana
			Resolved issue where automatically started orders with SF283 whilst SF357 could result in the wrong number of cavities.
1985	2023-12-29 08:39:03	Web	23.6.0 - Websockets, process values and Bzx21	JH		Asana
			We now support websockets for a multitude of events. Most notably the process value change event. This greatly increases the responsivness of Bzx21 when a process value is changed.
1984	2023-12-29 08:37:24	Client	23.6.0 - Increased tag support for internal activity checklists	JH		Asana
			It is now possible to use tags for part_info1-100 in checklists.
1983	2023-12-29 08:34:18	Client	23.6.0 - Added support to scrap cycles using process values	JH		Asana
			It is now possible to scrap an entire cycle instead of produced quantity when using process values.
1981	2023-12-29 08:30:23	Client	23.7.0 - Start order from process value using card number	JH		Asana
			Added support to start work order in Balthzar using the card number in a process value. The card number must exist among that machines planned orders.
1982	2023-12-29 08:30:23	Client	23.7.0 - Start order from process value using order number	JH		Asana
			Added support to start work order in Balthzar using the order number in a process value. The order number must exist among that machines planned orders.
1979	2023-12-13 08:56:03	Web	23.7.1 - Checkin at zone	EH		#94750
			It is now possible to check in a zone. When checking in at a zone, the employee is checked in at all machines that belong to the selected zone. Is activated by SF341
1978	2023-12-13 08:31:16	Web	23.7.0 - Delete widget pages in advanced mode	EH		Asana
			With the right privelages it is now possible to delete pages in the widget page
1977	2023-12-13 08:28:22	Web	23.7.0 - Updated Status widget	EH		Asana
			Status widget now shows a warning symbol if there is no data from the machine
1976	2023-12-12 15:02:00	Web	23.7.0 - Show/Hide Widget Menu on permission	EH		Asana
			Can now set a access level on Widget menu and hiding it for users below set level.
1973	2023-12-05 10:28:00	Etouch	23.7.0 - New handling of cavities at orderstart for company 5011	JB		Asana
			When directconnected to Pyramid, cavities ("insatser") are now fetched from the column PUTISTR.D7926_R�m�tt given that its contents are in the correct format : <cavities>/<string> This change only affects customer 5011
1972	2023-12-05 09:26:22	ERP	23.7.0 - Extended file-import of planned orders (5119)	JB	TPQS	Asana
			A new functionality for importing planned orders via files have been added, with a custom ruleset approving them for use.
1971	2023-12-01 11:39:35	Web	23.7.0 - ExtendedScrapWidget	EH		#93703
			A new widget that can be used to plot all kind of different scrap information over different time-spans.
1970	2023-12-01 11:32:43	Web	23.7.0 - More selectable Graph widget	EH		-
			It is now possible to select 3 graph widgets, one for each time frame.
1969	2023-12-01 11:04:36	Web	23.7.0 - Stopcode help text for bzx21	EH		#95226
			The specified help text, if any, will now show in the stopcode list and on the stopcode pop-up. For easier selection of stop code for the operator
1968	2023-12-01 10:00:42	Web	23.7.0 - New link-type in dashbord navigation	EH		Asana
			A new type of link type for dashboard navigator that enables navigation within bzx21.
1949	2023-11-07 16:33:25	Client	23.7.0 - Multiple machines in Shown machines	JB		Asana
			In Balthzar Client - Admin, you can now specify multiple machines in the websettings for Visible machines.
1948	2023-11-03 17:04:46	Client	23.7.0 - Forcibly update workorderdetails	JB		#95355
			A new button has been added in the details form for workorders in Client. This button re-calculates the data shown, and presents current data.
1947	2023-11-01 09:09:43	Web	23.6.1 - Extented reportviewer to customdocuments on dashboardd	EH
			It is now possible to show custom documents on bzx21 dashboard.
1980	2023-10-30 07:44:23	Client	23.7.0 - Internal Activity and order without part type id	JH		Asana
			Fixed issue where internal activity created using work order event on an order without part type id sometimes could fetch part type id from the previous order.
1946	2023-10-26 13:26:41	ERP	23.6.0 - Extended import log, erp_connect	JB		Asana
			As of this version, a log is written as erp_connect runs import of orders for customer 5119, thereby making it easier to detect unexpected interruptions, should they occur.
1945	2023-10-23 11:12:27	Etouch	23.6.0 - SF367 Label via Nicelabel has been changed	JB		Asana
			Specialfunction 367 has been changed so that every label printed now has a link to its corresponding palletflag, and the standard eTouch-button for printing palletflags have been replaced when this specialfunction is active.
1943	2023-10-20 13:19:42	Web	23.6.0 - Quickreport widget	EH		#93698
			A new widget where you can add upp to 8 button that generates selected reports.
1944	2023-10-18 13:21:07	Client	23.6.0 - Statuscolumn, production efficiency by term	JB		Asana
			A new dynamic column has been made available displaying the P%WOCR, short for Production efficiency without cavity reduction consideration. This value is dynamically updated as the type of overview is changed between Today/24hours/Shift/Calendar, taking the machine-limits for speed into consideration, that is Speed deviation yellow/green limit.
1942	2023-10-18 13:15:44	Client	23.6.0 - Prevention of saving erroneous machineIDs	JB		#94294
			Previously there has not been any validation of machineIDs when saving machines, which have lead to some machineIDs causing a series of issues in Balthzar. MachineIDs containing those characters are now prevented from being saved or updated.
1941	2023-10-17 08:35:54	Web	23.6.0 - Added "no color" to finished order widget.	EH		#94219
			Added "no color" selection to finished order widget.
1940	2023-10-17 08:28:19	Web	23.6.0 - New reports from bzx21	EH		92846
			Added report for Follow up Checklist and Follow up internal activties to bzx21
1939	2023-10-17 08:12:30	Web	23.6.0 - Hide/Show menu on widget depending on permission	EH		#93701
			It is now possible to set a permissionlevel to show widget menus.
1938	2023-10-17 08:09:12	Web	23.6.0 - WarningWidget	EH		#92973
			A widget where you can select which warning to display and if it should blink or not. Can select several and it will roll trough the selectd warnig at given intervall.
1937	2023-10-17 07:47:54	Web	23.6.0 - Upgraded TimeHistoryWidget	EH		#93700
			Added time selection Added Show/hide quantity Added costum label
1936	2023-10-12 14:51:52	Client	23.6.0 - Production report Detailed new selection	PJ		Asana
			Production report detailed now has a new selection, show stop list. If this is selected we include the report stop list in a new section for each machine.
1934	2023-10-12 14:48:31	Client	23.6.0 - Time distribution department pivot/graph	PJ		Asana
			New selection available, Machines, it alows you to select one or more machines you want the report to include. If no machines are selected we only care about the machines to and from selection, if multiselect is used the machine needs to be included in both selections.
1935	2023-10-12 14:48:31	Client	23.6.0 - Oee material Pivot/graph	PJ		Asana
			New selection available, Machines, it alows you to select one or more machines you want the report to include. If no machines are selected we only care about the machines to and from selection, if multiselect is used the machine needs to be included in both selections.
1933	2023-10-04 10:38:05	Client	23.6.0 - Turn off notices, admin Users	JB		Asana
			A new checkbox has been added in Admin for users called Turn off noces, which while active, blocks notices being sent to the user.
1932	2023-10-02 09:17:49	Client	23.6.0 - Internal activities, new event	JB		Asana
			In Admin for Internal activities, two new events will be selectable, SF414 Start event and SF414 Finished event. Check documentation for further details. (These events have translationphrases attached to them, (7425 and 7426), so they are enabled for companyspecific translations.)
1931	2023-10-02 09:03:08	Client	23.6.0 - User settings event	JB		Asana
			When saving <None> as widget settings, that setting were not immediately taking effect as intended, that is now adjusted.
1929	2023-09-28 11:40:08	Web	23.6.0 - BZX21 Report Followup Internal Activities	EH		92846
			Added the report Followup Internal Activities to bzx21
1928	2023-09-28 11:38:42	Web	23.6.0 - BZX21 Report Followup Checklist	EH		92846
			Added the report "Followup checklist" to bzx21.
1930	2023-09-27 16:13:49	Client	23.6.0 - Checklistrows, loosened verification	JB		Asana
			The fields Upper control, limit and Lower control, limit in Internal activities, Checklist, has been changed to allow empty input, since they are rarely used.
1927	2023-09-27 14:08:54	Client	23.6.0 - Key for pushnotice	JB		Asana
			In this version a new field has been added in Admin for users called Key for pushnotices, which will be used by thirdpartycontrols for delivering pushnotices, if used.
1925	2023-09-27 08:29:24	Web	23.6.0 - Added button that Remove planned order from list	EH		92247
			Added a button that apperas when a planned order is selected in the "Planned order" view. The button only appears if the user have the correct permission. When pressed, the selected planned order is deleted.
1926	2023-09-25 16:11:57	Client	23.6.0 - Pushnotice	JB		Asana
			As of v23.6.0, a new field called Pushnotice has been added to Admin for Messagegroups. This field indicates that messages should be distributed via a thirdpartycontrol along their usual way of delivery. (A new setting on the user called Deny systemmessages will override this setting, if set.)
1924	2023-09-22 08:07:34	Client	23.6.0 - Testcompanies	JB		Asana
			As of this version, testcompanies can be used using your current company_id + 2000, meaning that if your company_id is 5054, you can add a testcompany with 7054. Check with Delacroy for further details regarding the use of testcompanies.
1922	2023-09-18 16:23:27	Scheduler	23.6.0 - IFS signed in verification in Balthzar	JB		Asana
			A new function has been developed for company_id 5008, which forces employees to be signed in at IFS in order to stay logged in at Balthzar. Balthzar Scheduler will periodically validate all signed in employees against IFS, and those that are not signed in at IFS will be signed out from Balthzar, but not the ohter way around.
1921	2023-09-14 15:17:58	Client	23.6.0 - New specialfunction (414), event at first and last good quantityreport	JB		Asana
			A new specialfunction has been developed which triggers the creation of a event when an order gets its first manual good quantityreport, as well as when it gets its first good quantity that makes the total equal or exceed the planned quantity. These events can then be used to execute additional logic.
1923	2023-09-09 16:26:41	Client	23.5.0 - Forced clockout in Balthzar due to not being clocked in at IFS	JB		Asana
			As of v23.5.0, users who are not clocked in at IFS will be clocked out at Balthzar at companyID 5008
1920	2023-09-08 11:18:04	Web	23.5.0 - Scale Sequence	FC
			Scale Sequence widget implemented.Contact delacroy support for requirements + configuration.
1919	2023-09-08 11:17:00	Web	23.5.0 - Visual detail planning	FC
			Alternative zone based detail planning
1917	2023-09-08 11:15:41	Web	23.5.0 - Dashboard 2.0 early access	FC
			Early access to the (continued) rework of the new dashboards is now available. More flexibility in what data to show, subdashboards, tables and more.
1918	2023-09-08 10:53:53	Web	23.5.0 - SF413	EH		91180
			SF413 checks if user is clocked in at other machines and if clocked in ask if the user wants to clock out at all other machines.
1916	2023-09-08 10:51:51	Web	23.5.0 - Refresh event added to Admin action center	EH		Asana
			The refresh event can be accessed from the admin action center. The event causes all logged in devices to refreash. This should speed up slow devices.
1915	2023-09-08 10:49:47	Web	23.5.0 - Admin action center	EH		Asana
			The new page in the Admin panel called Admin Action center is now available. From the admin action center it is possible to send out events/actions etc.
1914	2023-09-08 10:48:41	Web	23.5.0 - UpdateScrapResons event	EH		Asana
			When scrap reasons get added/updated an event is created and BZX21 updates accordingly.
1913	2023-09-08 10:32:20	Web	23.5.0 - OEE widget upated	EH		90896
			In the oee widget it is now possible to change time span for value 1,2 and 3.
1911	2023-09-08 10:30:20	Web	23.5.0 - Navigation buttons	EH		Asana
			Added navigation buttons directly from and to admin/config for dashboards and widgets
1912	2023-09-08 10:26:58	Web	23.5.0 - Premade dashboard components	EH
			T,A,K and TAK as premade dashboard components
1910	2023-09-05 14:29:57	Client	23.5.0 - Availability Pivot/Graph	PJ
			New selection criteria has been added to the report Availability Pivot/Graph Data type: Here you select wether to show availability or runtime.If availavility is selected we show availability just like before. If instead run time is selected we show run time in the graph.
1909	2023-09-04 15:24:28	Client	23.5.0 - Changes to special function 367	JB		Asana
			Special function 267 has been changed so that new printouts are invoked via the Other-menu. If used, change translation-phrase 7350 for a customized button-text-
1908	2023-08-10 08:22:18	Client	23.5.0 - Minimum password lenght	JB		Asana
			In v23.5.0 a optional minimum lenght of new passwords, can be forced. Old passwords remain unaffected.
1907	2023-08-10 08:19:50	Client	23.5.0 - Update own password	JB		Asana
			In v23.5.0 a new function is introduced which lets a logged in user change his/her password. This is primarily useful when the Admin-page for users is restricted for the logged in user. The only difference changing password this way compared to via Admin, is that you are supposed to know your current password in order to change it.
1906	2023-07-27 10:28:49	Etouch	23.5.0 - Planned speed adjusted for cavity reduction (SF412)	JB		Asana
			A new special function has been developed which allows eTouch to display the planned speed of an order, taking cavity reduction into account. This specialfunction is not web enabled yet.
1905	2023-07-26 16:06:48	Client	23.5.0 - Additional features for erp_connect, M3 Thule import method	JB		Asana
			New functionality added that allows manual configuration of specifc times for import, as well as an external trigger for starting a workorder import from M3.
1904	2023-07-25 10:58:09	Client	23.5.0 - Event when changing insert	JB		Asana
			For customer 5119, a new functionality has been developed which creates a new event at the time of changing a insert of a tool.
1903	2023-07-24 16:30:57	Client	23.5.0 - Admin - Targets	JB		Asana
			Admin now has a menyoption for viewing/administering Targets
1902	2023-07-24 16:28:48	Client	23.5.0 - Event for importcompletion (5119)	JB		Asana
			The existing import of planned orders for companyID 5119 has been extended with the creation of a event indicating completion.
1901	2023-06-02 10:14:19	Client	23.4.0 - New special function (407), RecipeID at order	JB		Asana
			A new special function has been developed which adds a new column to planned orders called recipeID, which is filled with customerspecific logic for customer 5072. In eTouch this function extends the functionality of SF102, so that the displayed information additionally shows the recipeID-column. In Client the new field can be added to the grid wherever planned workorders are displayed.
1900	2023-05-29 11:45:36	Client	23.4.0 - Send to websockets	JB		Asana
			A new setting has been added to Admin for process values that determines if they should be sent to websockets, see documentation for further information.
1899	2023-05-29 08:20:30	Client	23.4.0 - Copying checklists in Admin	JB		Asana
			In previous versions when saving checklists under a new name, some columns were lost in the process. That is now fixed.
1898	2023-05-29 08:18:44	Client	23.4.0 - Internal activities - Use input verification	JB		Asana
			A new setting has been added to Internal activities called Use input verification, refer to the documentation for further details.
1897	2023-05-25 09:01:09	Client	23.4.0 - Planned orders import via XML	JB		Asana
			A new function has been developed which imports planned orders an corresponding materials using scheduled exported xml-files, primarily developed for customer 5121.
1896	2023-05-04 10:40:20	Client	23.4.0 - Configurable option to import orders with Balthzar-data	JB		Asana
			As of v23.4.0 it is possible to configure the import of planned orders via SAP to inkclude part-information from Balthzar. In practice, this means that imported orders are complemented with information from Client-->Admin-->Parts for all planned orders with a matching part/operation/machine-configuration.
1892	2023-04-21 10:04:49	Client	23.4.0 - Performanceoptimization when searching for parts, Client	JB		84135
			When registering new workorders in Balthzar Client, searching for parts has been quite slow for certain companies. An optimization has been applied which hopefully speeds up the searching of parts considerably.
1891	2023-04-18 07:50:36	Client	23.3.0 - Custom sorting tidshistorik dashboard	FC		Asana
			Added options to sorting DashboardTimeHistory by data key (defaults to machine_id) or in the order that the machine id's have been input
1890	2023-04-17 13:36:36	Web	23.3.0 - Add option to existing widget to take from 1-5 latest orders instead	FC		Asana
			MachinePerformance now has settings to show values from an average over past orders as requested by customer
1889	2023-04-17 13:34:48	Web	23.3.0 - Flex order labels	FC		Asana
			Added functionality to set a custom label in FlexOrderButton, as per request from customer # 5008
1888	2023-04-17 13:32:49	Web	23.3.0 - Planned orders widget och running orders widget	FC		Asana
			Couple of new table widgets to display information as per the Asana link
1893	2023-04-17 13:30:52	Client	23.3.0 - New report, production pace excel	PJ		Asana
			A new report has been added, production pace to excel, the report shows data for each order that has been stoped in the selected interval.
1886	2023-04-17 08:15:06	Web	23.3.0 - Document ��	FC
			Changed escape() to encodeURIComponent() for setting up file links to fix cases where certain characters caused broken links, bug originally reported by company 5037
1885	2023-04-14 15:53:13	Client	23.3.0 - New M3 import	JB		Asana
			A new way of importing planned orders from the M3 erp system has been developed for customer 5019.
1884	2023-04-14 11:24:05	Etouch	23.3.0 - Verify sign in at machine via IFS	JB		Asana
			A new specialfunction, 406, has been developed which makes it possible to verify signing in at machines via IFS.
1883	2023-03-09 14:30:54	Client	23.2.0 Removal of boxes (5054 only)	JB		Asana
			A new procedure has been developed for company 5054, sp_box_5054_scrap_box, which allows removal of produced boxes according to companyspecific rules.
1881	2023-03-03 14:22:29	Client	23.2.0 - Report selection time interval	PJ		Asana
			Added two new time intervals to the report selections. this week -1 shows the data for this week, but goes from sundag to saturday last week -1 shows the data for last week, but goes from sundag to saturday
1879	2023-03-03 14:19:20	Client	23.2.0 - log in/out issue	PJ
			Fixed an issue where if you logged out and the logged in as another user we sometimes kept settings from the first user.
1894	2023-03-03 13:32:40	Client	23.2.0 - new datatype in production follow up to excel	PJ		Asana
			A new datatype selection has been added to the report production follow up to excel. This means you now can show two different datatypes at the same time.
1878	2023-03-03 11:17:13	Client	23.2.0 - Stopp list 2	PJ
			A new selection criteria has been added to the report stop list 2, only show stops with text. If this is selected we only show stops that have a stop text assigned to it.
1882	2023-03-03 08:42:18	Client	23.2.0 - Companyspecific toolsynch (5054) has been adjusted	JB		Asana
			The companyspecific toolsynch for company 5054 has been adjusted so that newly created tools are given a set of default toolproperties based on toolgroup, previously defined.
1877	2023-03-02 15:34:34	Etouch	23.2.0 - Editing of stopnotes	JB		Asana
			The lenght of text written as stopnotes has been extended to 2000 characters, both in Client and in eTouch.
1876	2023-03-02 15:33:12	Client	23.2.0 - Editing of records in object_pallet_flag_sf90_box	JB		Asana
			As of this version, a companyspecific function for company 5054 has been added, which enables editing of created records in object_pallet_flag_sf90
1895	2023-02-24 13:42:18	Client	23.2.0 - SF184 optimizations	JB		Asana
			In this version SF184 has been optimized performancewise for customers using connectiontype = 0.
1874	2023-02-21 12:52:32	Client	23.2.0 - Extra login security, domain login	JB		Asana
			An additional layer of security has been added to users who use domain-login for Balthzar. These users will have to make one (1) regular login when starting up Client, in order to generate a personal lightweight key-file, bound to the computer this is done at. Every consecutive login will then be made automatically, as before. When changing the domain-user, this will have to be repeated. The personal keyfile is bound to the login, and is useless when utilised on any other computer.
1873	2023-02-20 11:12:05	Client	23.2.0 - Arithemtic and first time value	JH
			Fixed issue where the first subscription occurred with arithemtic would be skipped.
1872	2023-02-20 11:11:09	Client	23.2.0 - Process values and arithmetic	JH
			Added support for boolean in arithmetic. For all operations True will be counted as 1 and False will be counted as 0.
1871	2023-02-16 13:10:35	Client	23.2.0 - Login issue	JB		Asana
			When trying a faulty password for a user trying to login to Balthzar Client, the program quit and a restart was forced before trying a new attempt. This has been adjusted so that the login screen remains active without a restart. A related issue where new users with domain-login could not autologin has been adressed as well. As of v23.2.0, the login-window now pops up on the screen where the mouse currently is, if there is more than one present.
1870	2023-02-16 13:08:53	Etouch	23.2.0 - New specialfunction (402) for printing palletflags	JB		Asana
			As of v23.2.0, you can now make palletflag printouts to file, which in turn can be processed by other means than Balthzar, by activating specialfunction 402.
1869	2023-01-31 10:41:14	Client	23.1.0 - Manual machine	PJ
			Fixed an issue so that we check if a machine is a manual machine when deciding wether or not to calculate cycles, not just the manual machine status flag as we did previously. We could previously end up in a situation where the machine was not a manual machine but we also calculated no cycles because them manual machine status was set to stop time.
1868	2023-01-31 10:40:05	Client	23.1.0 - Runtime after stop seconds	PJ
			Fixed so that the overview field runtime_after_stop_seconds is correctly calculated.
1867	2023-01-31 10:38:04	Client	23.1.0 - Uncoded stops	PJ
			We new calculate the uncoded stops shift 24h on the last shift code if the current shift code is 0.
1866	2023-01-31 10:35:53	Client	23.1.0 - SF399 No counter on stop time	PJ
			A new SF has been added that turns of all counters when the machine is in stop. This means no cycles or C2.
1865	2023-01-31 10:34:43	Client	23.1.0 - Admin machines	PJ
			Fixed an issue where the machines admin reloaded its data a second time a few seconds after an update.
1864	2023-01-31 10:25:11	Client	23.1.0 - Report at order start, monitor	PJ
			It is now possible to get Balthzar to report 1 second to monitor directly at order start by checkin a box in balthzar erp
1862	2023-01-31 10:18:15	Client	23.1.0 - Production follow up machine per day - Excel	PJ
			A new report has been added, production follow up machine per day - Excel. Here we shows either produced quantity, good quantity, scrap quantity, run time or stop time, for each machine, one column per day in an excel sheet. It is possible to split the dataset on department and to use excel templates.
1861	2023-01-31 10:08:09	Client	23.1.0 - Production report detailed	PJ
			There are a few new selections in production report detailed. Parts: Here you can select which parts to include in the report Part type: Here you can select which part types to include in the report. Production data, man: Shows production data for the man time at the machine. OEE and real speed is based on man time instead of machine time. Works with the line handeling checkbox. Part information, man: Shows part information on the machine based on the man time. Works with the line handeling checkbox. Target sum: Shows the calculated targets for the machine and how well it has been fullfilled. Target type: Select which kind of target is used in the target sum part. Show stops per shift: Shows the numbers of stops per shift and stop reasons. Stop Quantity: Shows how much one specific stop reason has been used. And shows a sum of how much all other stops have been used. Stopp reason: selects which stop reason is shown in Stop quantity. Show OEE breakdown graf: Shows a graf of all machine time, breaking it down piece by piece to show how much time is lost on each part of the OEE (A%, P%, Q%)
1863	2023-01-31 10:08:09	Client	23.1.0 - Follow up checklist	PJ
			The report follow up checklist has a new selection criteria, part type. Here you can select one or more part types that you want to show in the report. If no part types are selected we still show everything.
1860	2023-01-12 15:16:20	Client	23.1.0 - Userbound stopreasons	JB		Asana
			A new functionality has been developed which makes it possible to assign a user specific stopreasons. These assigned stopreasons will be available in addition to the existing ones found on the machine, when managing stops in client.
1859	2023-01-12 15:12:16	Client	23.1.0 - Gridsettings	JB		Asana
			As of v23.1.0 gridsettings throughout the system are more rigidly controlled when saved. Personal settings as well as default-settings can still be saved, however they can only be saved if they are loaded first. In essence, this means that you will not be able to save your personal settings as default settings if those already exists. You will need to delete them first, or actively load those settings and make your changes to that layout specifically.
1858	2023-01-04 13:08:21	Etouch	23.1.0 - Performance optimizations to SF184	JB		Asana
			Special function 184 has been optimized for speed, making it significantly quicker to respond, when used at companies with many planned orders.
1857	2023-01-03 16:55:25	Client	23.1.0 - Re-mapping networkpaths	JB		Asana
			As of v23.1.0, it is now possible to re-map local network paths (i.e "Z:\", "G:\") to UNC-paths, making documents available in BZX21 that were not available before. See documentation for further info about this.
1856	2023-01-02 16:02:45	Etouch	23.1.0 - New specialfunktion extending SF14 developed	JB		Asana
			A new special function, 401, has been developed extending SF14, which prevents manual typing of EAN-codes, forcing the user to use the intended scanner. Scanning wrong barcodes are now more clearly displayed as well, via a blinking message.
1854	2022-12-19 09:29:09	Web	22.8.0 - SF 396	FC
			Enabling SF396 enables quick print pallet flag flexButton to skip asking for an employee
1855	2022-12-16 13:06:35	Client	23.1.0 - Documentgroups added in Admin	JB		Asana
			A new field has been added in Admin for Manually linked documents, called documentgroups. This field is used in BZX21 when displaying documents, grouped by the groups entered.
1853	2022-12-16 13:05:05	Client	23.1.0 - Historical SF-changed	JB		Asana
			A performanceissue displaying historical SF changes has been fixed.
1852	2022-12-09 11:06:34	Client	23.1.0 - Automatic reload of shown orders	JB		Asana
			When creating planned orders in Client, the list of planned/running/finished orders are reloaded upon closing the form.
1851	2022-12-08 11:34:09	Etouch	22.8.0 - Start workorder logged to auditlog	JB		Asana
			Workorders started are now logged to the audit_log
1850	2022-12-07 12:47:15	Web	22.8.0 - Http document links, BZX21	FC
			BZX21 now correctly opens http linked external document in a new tab.
1849	2022-12-07 12:46:36	Web	22.8.0 - Custom table fields, larger text	FC
			It's now possible to select larger text (h1/h2/h3) when adding a custom field to a table in BZX21
1848	2022-12-07 12:33:50	Web	22.8.0 - Onscreen keyboard when searching tables BZX21	FC
			There's now on onscreen keyboard available when selecting the searchbar of any table in bzx21.
1847	2022-12-07 12:33:12	Web	22.8.0 - Dashboard transition	FC
			It's now possible to enable transitions (flip/slide/etc) between dashboards.
1846	2022-12-07 12:32:14	Web	22.8.0 - Runtime Per Shift widget	FC		Asana
			Added widget that shows runtime per shift for the last 24h/current week.
1845	2022-12-07 12:30:12	Web	22.8.0 - Report kassation BOM	FC		Asana
			It's now possible to report scrap from BOM.
1844	2022-12-07 12:29:13	Web	22.8.0 - Productiondata widget	FC		Asana
			Productiondata widget now supports showing more time periods and alternative units
1843	2022-12-07 12:28:14	Web	22.8.0 - Quick print flex buttons	FC		Asana
			Smart quick print buttons added to flex widget that only ask for missing information.
1842	2022-12-07 12:25:54	Web	22.8.0 - New table items planned orders	FC		Asana
			2 New items have been added to planned orders tables: One that allows you to view documents attached to certain order directly from the table (in a popup) Another that shows the status of the prev_op. (gray if never run before, red if ran but without production, yellow if ran but not finished, green if ran and produced).
1837	2022-12-07 12:24:32	Web	22.8.0 - Report on historical orders	FC		Asana
			It's now possible in bzx21 to report on historical orders by selecting an historical order and then directly navigating to report good/scrap
1841	2022-12-07 12:23:42	Web	22.8.0 - Process value limits	FC		Asana
			The live value widget now shows dynamic and static limits
1840	2022-12-07 12:19:21	Web	22.8.0 - New SF's	FC		Asana
			BZX21 specific: Sf393: Warns when attempting to stop an order that is unfinished. Sf398: Hide Employee# in signedIn widget and interface page. Sf400: If SF286 is enabled, don't automatically sync order to line but ask for confirmation when starting an order.
1839	2022-12-07 12:18:19	Web	22.8.0 - OrderSwap widget: stop order	FC		Asana
			OrderSwap widget is no configurable to stop the current running order by clicking on it.
1838	2022-12-07 12:17:24	Web	22.8.0 - Bugfix IA	FC		Asana
			Bzx21 now correctly shows and limits execution correctly on IA's that are set to show on other machines without being executable.
1836	2022-12-05 16:27:53	Client	22.8.0 - Internal activity and warnings	JH
			It is now possible to suppress internal activity warnings if the part or the tool is not currently running in the machine.
1835	2022-12-05 16:26:56	Client	22.8.0 - Trigger machine logging using boolean	JH
			It is now possible to use a boolean to trigger machine logging on or off.
1834	2022-11-23 16:41:20	Etouch	22.8.0 - SF391 changes - Now quantity is reported at childmachine	JB		Asana
			A change to the SF391 has been implemented which makes a report on the child-machine as well, along with the earlier report on the parentmachine.
1833	2022-11-23 16:39:09	Client	22.8.0 - No loose quantityreports	JB		Asana
			In previous versions of Balthzar, reportings of quantity could in some rare instances get a reportnumber (card_no) = 0. This is now corrected.
1832	2022-11-21 13:45:26	Etouch	22.8.0 - New SF for manual machines, Machinetime by signed in operators	JB		Asana
			A new special function has been developed which makes it possible to force Balthzar to consider signed in operators when calculating runtime in manual machines. This will also affect statistics generated when orders are finished.
1831	2022-11-07 16:11:21	Client	22.8.0 - Admin - Saved position in special functionslist	JB		Asana
			When editing which machines should have which specialfunctions via machines by SF or SF by machines, selections are now saved between updates. This will hopefully make multiple edits more manageble.
1830	2022-11-04 14:11:04	Etouch	22.8.0 - Signed in employees can now be partial	JB		Asana
			When siging in on a machine in Balthzar you always got the quantity of 1 as signed in employees. This is now adjusted so that you can be counted as 1 / <number of machines signed in at> for each signed in machine.
1829	2022-11-04 14:08:39	Client	22.8.0 - Limits with decimals	JB		Asana
			In this version limits on a machine in Admin, can be entered with up to five (5) decimals.
1828	2022-11-04 13:58:25	Client	22.8.0 - No inactive machines in machine-list	JB
			As of v22.8.0 no inactive machines will be displayed in the dropdown-list for machines in the form where failed erp reportings are managed.
1827	2022-11-04 13:24:06	Client	22.8.0 - SF297	PJ
			SF297 now checks both if quantity is reported on the previous operation in balthzar or in the erp-system before deciding if we allow order start. If either is reported we allow it. Previously we only checked if anything was reported in Balthzar.
1826	2022-11-02 15:34:07	Client	22.8.0 - Waitform in SF-history	JB		76115
			A waitform has been added in the Admin for displaying historical specialfunction changes, to clarify that the application isnt hung.
1825	2022-11-02 15:31:26	Client	22.8.0 - Editing machines in Admin	JB		Asana
			When editing a machine that had a certain zone or category and then directly chose to edit another machine which didnt have a zone or category, the previously selected machines category/zone were assigned to the new machine, making accidential unintended updates very likely.This is now fixed
1823	2022-10-31 11:13:56	Client	22.8.0 - SF297	FC
			When sf297 checks if anything is reported on previous operation before allowing order start, we now also check if anything is reported directly in the erp system and not only if anything is reported i Balthzar
1824	2022-10-31 10:15:34	Web	22.8.0 - Hide planned order which previously had been started in current machine (SF395)	JB		Asana
			A new specialfunction (395) has been developed which makes it possible to only display an planned order until it has been run once on a certain machine.
1822	2022-10-31 10:13:27	Web	22.8.0 - Replacement paths	JB		Asana
			When viewing documents in BZX21, paths registered are sometimes referencing local paths, and needs to be replaced with UNC equivalent ones. A new function has been implemented that supports this.
1821	2022-10-28 14:48:06	Client	22.8.0 - Erp reportings	PJ
			Updated so that the machine selection list in erp reporting only show active machines that is erp-connected.
1820	2022-10-25 08:34:41	Web	22.8.0 - Only show BOM-level 1, new SF	JB		Asana
			A new specialfunction (394) has been developed which makes it possible to hide all materials which dont belong to BOM level 1, when listing materials.
1819	2022-10-25 08:32:40	Etouch	22.8.0 - Performance increased in Search order, eTouch	JB		71668
			The function for starting an order by searching among planned orders has historically been a slow function which now has been optimized somewhat, in eTouch.
1818	2022-10-17 07:34:23	Client	22.7.0 - Process value limits	JH
			Added support for multiple process values in one process value group on one limit.
1817	2022-10-17 07:33:33	Client	22.7.0 - CPK Calculation	JH
			Overhauled the way CPK values are calculated.
1816	2022-10-11 11:07:38	Client	22.7.0 - Buffer reset	PJ
			If we fail to download data to the server buffers we no longer empties the buffer, but keep the old values until next download.
1779	2022-10-07 10:55:04	Client	22.7.0 - Report oee-data 2	PJ
			A new selection has been added to the report OEE-data2, create part sum , here you can select department, zone or category. If this is selected we group the machines on the specific department/zone/category and calculates the sum for it.
1778	2022-10-07 10:51:00	Client	22.7.0 - Target basis	PJ
			When we calculate targets with target type planned time without setup time we now also save which orders we have planned to run and when and how much time it will take.
1777	2022-10-07 10:49:54	Client	22.7.0 - Targets	PJ
			It is now possible to set fixed values as target, if fixed values are selected you need to also select if the fixed value is quantiy or time.
1776	2022-10-07 10:40:24	Client	22.7.0 - Sign in using RFID	JH
			Added support to use RFID-device connected as a process value to log in employee at machine.
1775	2022-10-07 10:39:04	Client	22.7.0 - Continuous reporting of finished order to ERP-system	JH
			When this is activated a finished order in balthzar will continuously be reported as finished to the ERP-system up until four hours after the order is finished.
1774	2022-10-07 10:37:41	Web	22.7.0 - Print labels and palletflags using M3-API	JH
			By activating SF385 and SF386 labels and palletflags respectively will be printed using an API-call to M3.
1773	2022-10-05 14:22:22	Client	22.7.0 - Applying calendaradjustments	JB		Asana
			The function for applying calendaradjustments is now run as a backgroundjob, allowing the user to continue working in Balthzar without locking the interface
1772	2022-10-05 11:18:13	Client	22.7.0 - Companyspecific function for editing SF90 palletflags have been updated	JB		Asana
			Now the NULL value can be assigned to all available columns.
1771	2022-10-05 11:16:47	Client	22.7.0 - Admin for specialfunctions has been updated	JB		Asana
			A few minor changes have been added to Admin when adminstering special functions, preventing accidential deletion and logging of performed changes.
1770	2022-09-29 15:53:56	Client	22.7.0 - New shortcut in planned order, Admin --> Parts	JB		Asana
			In this version a new shortcut to Admin --> Parts has been implemented, making it possible to work on registering new parts while registering new orders using those parts, whithout having to jump between forms as previously needed
1769	2022-09-28 09:26:38	Etouch	22.7.0 - New specialfunction, 392, use planned cycletime from Balthzar	JB		Asana
			A new special function, 392, has been developed which overwrites the started orders planned cycletime with whatever is configured for the part in Balthzars parts registry. The priority is the configuration made for a specifik machine, then the generic and lastly the planned cycletime originally used, on the planned workorder.
1768	2022-09-27 16:10:23	Etouch	22.7.0 - New specialfunction, report at parent	JB		Asana
			A new specialfunction, 391, has been developed which makes all manual reporting on a given machine end up at its parent. If the machine does not have a parent, reporting is prevented.
1767	2022-09-27 11:22:38	Etouch	22.7.0 - New specialfunction, 390, Start order at parent	JB		Asana
			A new specialfunction has been developed which makes starting an order at a machine in a line also start it at the machinelines parent-machine, given that the started order also appears in the parentmachines planned orders list.
1766	2022-09-26 16:34:37	Client	22.7.0 - SF389 Finish order at parent	JB		Asana
			A new special function has been developed which autoamtically ends an order at a given machines parent, when ended at the machine in question, given that both run the started order.
1765	2022-09-21 16:14:37	Client	22.7.0 - AGDA-integration	JB		Asana
			As of v22.7.0, erp_connect can import users from the AGDA system into Balthzar, via a exported .CSV file.
1764	2022-09-16 16:29:05	Etouch	22.7.0 - End workorder-code	JB		73994
			In previous versions, the stop workordercode configured in eTouch-parameters was not sent, after stopping a workorder. This is now fixed.
1763	2022-09-16 11:17:48	Etouch	22.7.0 - Added flexibility in SF226	JB		Asana-link
			Specialfunction 226 has been extended with the option of specifying a separate palletweight for each part_no used. If none is provided, the previous value 20 is used.
1762	2022-09-09 15:44:45	Etouch	22.7.0 - Blank login in new installation	JB		73709
			Sometimes when a login is required in eTouch, a blank form is shown, this is now corrected.
1761	2022-09-09 08:54:47	Client	22.7.0 - Oee data 2	PJ
			The report Oee-data 2 has gotten two new selection criterias. Exclude line children: If this is selected Only line parents will show up in the report. If a machine is not part of a line it is still shown. Create part sum: Here it is possible to select category/department/zone. If any of these is selected we sort the machines on the specified group and creates a sum for each group.
1760	2022-09-01 08:32:12	Web	22.6.0 - Advanced filtering tables	JH		70658
			Advanced filtering/grouping of tables based on custom logic added to bzx21 tables.
1759	2022-09-01 08:28:41	Web	22.6.0 - Label support bzx21	JH		Asana
			bzx21 now supports (re)printing labels. SF 376 enables default functionality, SF 379 modifies input behavior and SF 382 disabled direct printing from menu.
1756	2022-09-01 08:13:39	Web	22.6.0 - Weight control - time horizons	JH		Asana
			It's now possible to choose time horizons for the graph in the weight control widget
1757	2022-09-01 08:13:39	Web	22.6.0 - Production-result runtime	JH		Asana
			The production-result widget now also shows run/stoptime when set to shift/today
1758	2022-09-01 08:13:39	Web	22.6.0 - Material confirmation support	JH		Asana
			SF 368-370 support added to material widget. New flex button added to support SF 370. New indicator to show unconfigured materials.
1753	2022-09-01 07:55:40	Web	22.6.0 - Order summary widget	JH		70481
			Order summary widget added to bzx21
1754	2022-09-01 07:55:40	Web	22.6.0 - Group status widget	JH
			Group status widget added to bzx21, shows status on multiple machines related to existing machine.
1755	2022-09-01 07:55:40	Web	22.6.0 - Active part widget	JH
			Active part widget added to bzx21, shows information about the part being produced currently
1752	2022-09-01 07:54:43	Web	22.6.0 - History	JH		70657
			History per week/day/hour & transaction history are now available in Bzx21.
1751	2022-09-01 07:46:38	Web	22.6.0 - Own overviews	JH		70658
			It's now possible to access own overviews in bzx21. To do so, a table configuration needs to be saved first (in administration) before they show on frontend.
1750	2022-09-01 07:45:28	Web	22.6.0 - Moveable onscreen keyboard	JH		72881
			The onscreen keyboard can now be moved by dragging it by it's handle, or reset to it's default position with the reset button. Settings saved per device.
1749	2022-09-01 07:37:24	Web	22.6.0 - Large navigation buttons	JH		73111
			It's now possible to alter the default size of navigation buttons (back/forward/cancel + bottom nav buttons) in bzx21 - settings
1748	2022-08-26 11:31:11	Etouch	22.6.0 - Webpages in webbrowser	JB		73162
			A new specialfunction (384) has been developed which makes it possible to override the default usage of eTouchs internal webbrowser in favour of the default one installed. This allows more advanced webcomponents than before to be used in the linked documents, and eTouch still being able to (indrectly) display them.
1746	2022-08-22 13:09:57	Client	22.6.0 - HTTP process values	PJ
			It is now possible to have http-process values, these takes an address that is requiered, they also take a regex string that allows you to filter out a specific value.
1745	2022-08-22 13:07:12	Client	22.6.0 - Scheduled targets	PJ		Asana
			Added possibility to schedule target calculations, either through a calculation or a fixed value. This is done under admin -> targets -> scheduled targets. For more information about this, see the documentation.
1744	2022-08-19 11:25:46	Web	22.6.0 - SF325 and order dissappearing in Bzx21	JH		71998
			When performing a weight measurement using SF325 the order will no longer dissappear from the Bzx21 interface.
1747	2022-08-19 08:42:35	Etouch	22.6.0 - Automated recalculation of man_qty	JB		72619
			When signing in at more than one machine in eTouch, this resulted in a man_factor of 1 on all machines. Now it gets re-calculated as 1 / <number of signed in machines> for all machines that a employee is signed in at.
1743	2022-08-17 17:15:22	Etouch	22.6.0 - SF378 New specialfunction for manual machinestart	JB		Asana
			A new specialfunction (378) has been developed which automatically starts a manual machine at operator sign-in, given that a running order is present.
1742	2022-08-17 17:11:43	Etouch	22.6.0 - SF377 Start machine when starting order	JB		Asana
			A new specialfunction (377) has been developed which automatically starts a manual machine when a order is started from planned orders in eTouch, given that first piece control is NOT used.
1741	2022-07-18 09:54:55	Client	22.6.0 - Accessrights to General company settings	JB		55413
			A securitysetting has been added for the General company settings in Admin for those of you who want to use it.
1740	2022-07-06 09:27:10	Client	22.6.0 - Change of machine_id	JB		51258
			When changing machine_id of a certain machine, a dedicated function for this should be used. If the user tries to change it via Admin, a message warning of the consequences of this appears, hopefully preventing corrupted data.
1739	2022-07-06 09:25:21	Client	22.6.0 - Save gridsettings in Admin --> Users	JB		71603
			Previous versions of Client Admin could not save gridsettings in the Admin --> Users form, now it can.
1738	2022-07-05 08:40:39	Client	22.6.0 - Fixed issue in report process logging	PJ		64499
			Fixed an issue in the report process logging where the graph started zoomed in on a random point.
1737	2022-07-04 13:04:40	Client	22.6.0 - Active selected as default	JB		Asana
			As of this version when saving new records for User / Stopreason and Processvalues, the new record defaults to active. (Edit it afterwards if you insist on having a the inactive status.)
1736	2022-07-04 13:01:54	Client	22.6.0 - Added tabpage to the Reportings-page in Client	JB		68909
			A new tabpage has been added which summarized untransferred transactions by machine and day. This form acts as a shortcut to the previously implemented Overview's search-function, which in this version has been extended to include departments.
1735	2022-06-27 08:19:00	Client	22.6.0 - Production follow-up excel	PJ		71273
			Fixed an issue in the report Production follow-up excel where it failed to generate on longer timespans.
1734	2022-06-23 13:19:53	Client	22.6.0 - Stopreasonanalysis	PJ		69835
			Fixed an issue in the report stopreasonanalysis where you could no longer deselect stopreasons.
1732	2022-06-14 10:10:37	Client	22.5.0 - Adjustments to SF104 Show workordercomment at workorderstart	JB		69223
			SF104 has been adjusted so that all processvaluelimits are shown in the message at workorderstart.
1731	2022-06-14 08:27:57	Client	22.5.0 - New specialfunction, 374, Show processvaluelimits	JB		69223
			A new specialfunction has been developed which displays additional processvaluelimitinformation when using a new button in the Other menu.
1730	2022-06-13 15:35:51	Client	22.5.0 - Remaining time at workorderstart	JB		69276
			An initial calulcation of a predicted finishedtime of started workorders are now performed as workorders are started, as opposed to earlier when a few minutes needed to pass before an estimate was given.
1727	2022-06-13 12:54:32	Web	22.5.0 - Production goals in table overviews	JB		70551
			Overview are now able to display production goals .
1728	2022-06-13 12:54:32	Web	22.5.0 - Material status in planned orders	FC		70601
			Planned order tables now have access to a material control column. SF373
1726	2022-06-13 12:52:51	Web	22.5.0 - SF362 pallflagga	FC		70550
			SF362 now also shows history on print pallet flags.
1725	2022-06-13 12:51:14	Web	22.5.0 - Dashboard fixes	FC		70197
			Some small adjustments to dashboard that enable sizing of text inside dashboard production values and dashboard status as well as an improved setup time countdown in the case of setup time when the dashboard status component is set to mode:runtime.
1723	2022-06-13 12:46:32	Web	22.5.0 - Confirm ingoing materials on order start	FC		70193
			A new SF, 368, enables confirming material after starting an order. What materials should be confirmed at which positions is determined by another new SF 369.
1724	2022-06-13 12:46:32	Web	22.5.0 - Assign materials to line positions	FC		70234
			A new SF, 369, allows the user to assign materials to specific line positions and determine if those materials should be confirmed upon order start.
1722	2022-06-13 12:25:32	Web	22.5.0 - Planned orders materials	FC		70069
			It's now possible to view materials on planned orders through bzx21.
1718	2022-06-13 12:25:32	Web	22.5.0 - Last stopreasons quick choice buttons	FC		69243
			SF 356 now also adds quick choice buttons to the latest 3 stopreasons.
1720	2022-06-13 12:25:32	Web	22.5.0 - IA unreasonable values	FC		69843
			Bzx21 now blocks navigation in case of an unreasonable value in one of the questions within internal activities.
1721	2022-06-13 12:25:32	Web	22.5.0 - Report ordering default selections	FC		69984
			When ordering reports, bzx21 now correctly uses the default selection logic used in the client.
1717	2022-06-13 12:01:46	Web	22.5.0 - Setting widgets	FC		68685
			2 new widgets added to allow rapid enabling/disabling of alarms/escalation. Functionality also available through flex-buttons inside the various flex-widgets.
1716	2022-06-13 12:00:27	Web	22.5.0 - Order Material implementation	FC		68184
			It's now possible to use the order material functionality (SF110) in bzx21
1715	2022-06-13 11:52:28	Web	22.5.0 - Bzx21 SF implementations	FC
			As of 22.5.0 Bzx21 now has support for the following existing special functions: 4,6,14,46,62,109,131 ,156,273
1719	2022-06-13 11:52:28	Web	22.5.0 - Flex order widget	FC		69610
			Flex order widgets now have access to operationtext (SF43)
1729	2022-06-13 11:19:23	Client	22.5.0 - Admin --> users, now more userfriendly	JB		69613
			In earlier versions of Balthzar, the Admin - section for Users where somewhat crunched together in some parts, which now is corrected.
1714	2022-06-09 16:10:43	Client	22.5.0 - SF278, standardlayout	JB		66588
			In previous versions of eTouch, SF278 did not have a standardlayout for the grid displaying materials. Now it has.
1733	2022-06-01 10:38:59	Client	22.5.0 Verify employee using PIN-code	JH		67676
			When using Verify employee using PIN-code on a processvalue the user will be logged in to the machine if the verification is successfull.
1713	2022-05-25 15:23:54	Client	22.5.0 - P% without cavity reduction	JH		70574
			It is now possible to see P% without cavity reduction in the client overview
1712	2022-05-25 09:07:18	Client	22.5.0 - Deviation outside reasonable limit	JH		69220
			It is now possible to set if a deviation should be sit if the entered value is without upper/lower limit or upper/lower reasonable limit
1710	2022-05-17 14:23:43	Client	22.5.0 - Production report parts per day	PJ		69928
			A new report has been added, production report parts per day. It shows information about how different parts has run for each machine and day. It also shows how much scrap has been reported on the first four scrap reasons for each part in alternative unit 1.
1708	2022-05-12 09:15:02	Client	22.5.0 - Scrap excluded from OEE	PJ		69080
			It is now possible to create scrap reasons that are excluded from oee calculation. It is currently only available in production report detailed, oee material and in the overview.
1707	2022-05-10 15:17:28	Client	22.5.0 - Transaction density	JB		69704
			A new functionality has been developed which makes it possible to get an overview of which machines are responsible for which amount of the transactions registered, in the most recent 100.000 records. This is primarily used to troubleshoot performance issues.
1706	2022-05-04 09:13:54	Web	22.4.0 - SF45 support	FC		68185
			SF45 (operationtext at order start) now supported by bzx21.
1705	2022-05-04 09:13:13	Web	22.4.0 - Machine warning support	FC		68340
			Machine warnings now supported by bzx21.
1704	2022-05-04 09:12:46	Web	22.4.0 - Machine priority support	FC		68559
			Machine priority is now supported in bzx21
1703	2022-05-04 09:12:04	Web	22.4.0 - SF254 support	FC		68763
			Machine specific scrap reasons are now supported in bzx21.
1702	2022-05-04 09:11:12	Web	22.4.0 - Dashboard bugfix	FC		68813
			Dashboards now properly reload when swapping between copies of the same dashboard.
1701	2022-05-04 09:10:16	Web	22.4.0 - Text adjustments	FC		68762
			Several widgets have been adjusted to display better at more screen resolutions
1700	2022-05-04 09:09:03	Web	22.4.0 - Order priority	FC		69029
			BZX21 now supports setting order priority from the order-priority table column (configurable in admin)
1699	2022-05-04 09:06:23	Web	22.4.0 - Advanced widget layouts	FC		#68295
			It's now possible to switch to "advanced mode" when configuring widget layouts. Advanced mode supports multiple pages per machine, setting height/width on individual widgets and dividing pages into columns
1698	2022-05-04 09:01:46	Web	22.4.0 - Dashboard: adjustable goal	FC		#69508
			In dashboards, the production-goal widgets are now more adjustable. Arrow height, padding, text sizes are now all configurable.
1697	2022-05-03 13:04:38	Client	22.4.0 - Confiugurable ordergrids, Client	JB		69496
			As of v22.4.0 the ordergrids showing planned, finished and orders in progress have been replaced and are now able to be configured as most other grids in Balthzar. (Re-arranging columns, editing fonts, and saving layouts.)
1696	2022-05-03 08:25:47	Client	22.4.0 - Stoptime by stopreason via processvalue	JB		68721
			A new processvalueoption has been added which allows stoptime to be registered by stopreason via the processvaluemodule.
1695	2022-05-02 13:39:33	Client	22.4.0 - Default palletflag printer	JB		68995
			If palletflagprinter is not selected when using BZX21, the default printer will be used. If such does not exist, printout will fail.
1694	2022-05-02 13:37:01	Etouch	22.4.0 - Extended info. SF145 - tools list in eTouch	JB		69030
			Specialfunction 145 has been extended to show inserts for selected tool in a separate table below the original one, showing only tools.
1692	2022-04-28 14:00:23	Client	22.4.0 - Password storage	JH		68974
			Changed how Balthzar handles passwords in storage and during login. This is done in order to increase security.
1693	2022-04-28 09:04:26	Client	22.4.0 - Continous verification of stop	JH		69222
			When using stop coding from process value it is possible to set up a continous verification of the stop. This means that the code is sent again if the current stop code on the machine differs from the one provided by the process value.
1691	2022-04-27 11:19:54	Web	22.4.0 - SF 365 & machine interface arrows	FC		69001
			By default, machine interface arrows now navigate between widget-pages instead of machines. The old behavior can be forced with SF 365.
1690	2022-04-27 11:17:19	Web	22.4.0 - SF 364	FC		69003
			SF 364 hides machine lines in the sub-menu navigation in the machine interface.
1689	2022-04-27 11:10:50	Web	22.4.0 - SF 362 Show history during reporting	FC		69068
			SF362 enables a split view in bzx while reporting good/scrap quantities that displays the respective history on the right.
1688	2022-04-27 11:08:51	Web	22.4.0 - Idle behavior	FC
			When inside the machine interface, idling for a set amount of time will return you to the first page of the main interface page. This time can be set in the settings tab, and defaults to 10m. -1 disabled this behavior.
1687	2022-04-20 16:09:49	Client	22.4.0 - Confirm insertslist, new specialfunction	JB		69129
			As of v22.4.0, a new special function has been developed which asks the operator of eTouch if the inserts used on the planned workorders tool is correct. If it is not, workorderstart can be aborted.
1686	2022-04-19 15:13:23	Client	22.4.0 - Clear buffers	JB		68904
			As of v22.4.0 a new menuoption in Admin has been added which allows resetting all buffers used in Balthzar. This option can be found in the Other-menu.
1685	2022-04-19 14:56:44	Client	22.4.0 - Adjust running order, new options available	JB		59602
			When editing a running order from Client, you were previously forced to restart the order in order for the workorder to receive the new settings. As of v22.4.0 you can now choose to edit a running order without restarting it.
1684	2022-04-19 14:29:02	Client	22.4.0 - Apply historical calendaradjustments	JB		64493
			As of this version, historical calendaradjustments can be applied in the standard form for scheduling them.
1683	2022-04-19 14:14:36	ERP	22.4.0 - Deletion of previously cancelled planned orders (Dynamics)	JB		65124
			When using Dynamics as ERP system, planned orders which are cancelled will be removed from planning if 14 days have passed since their cancellation. This deletion is scheduled once a day.
1682	2022-04-19 11:39:58	Client	22.4.0 - Personlized overviews in Client can now be copied	JB		67715
			The personalized overviews defined as Own overview, Own pivot/graph and Own pivot + graph in Client can now be copied via the Edit option in their respective menuoptions.
1681	2022-04-12 10:36:10	Client	22.3.10 - Internal activities and order starts	JH		68654
			Fixed issue where order start would reset scheduling for activities that where not order bound.
1680	2022-04-11 14:42:44	Etouch	22.4.0 - New special function, positionlimited planned orders list, line	JB		67956
			A new specialfunction (359) has been developed which filters the planned orders list in eTouch, so that only workorders which have been started by the previous machine in the machine-line, is shown.
1678	2022-04-11 14:41:06	Etouch	22.4.0 - New SF, only one operator	JB		68724
			A new special function has been developed which makes sure that only one operator is signed in at a given machine. (When signing in, all previously signed in persons are signed out, unconditionally.)
1677	2022-04-05 14:32:05	Client	22.3.0 - OPC-Connector and heartbeat	JH		67905
			Added heartbeat function. This can be used to monitor the health of a OPC-Server connection.
1676	2022-03-29 08:50:34	Web	22.3.0 - Stopreason count graph widget added	FC		57333
			stopreason-count-graph widget is now available, which shows the amount of each stop in the selected period
1675	2022-03-29 08:49:38	Web	22.3.0 - Graph legend text sizing on dashboards	FC		64893
			It's now possible to define a font-size on dashboard-graph and dashboard-graph-location components.
1674	2022-03-29 08:48:33	Web	22.3.0 - Disable autoshow sidebar on xl screens	FC		64946
			There's now an option under settings to disable the default behavior of always showing the sidebar on larger screen.
1673	2022-03-29 08:47:47	Web	22.3.0 - Material widget	FC		65145
			Material widget added
1672	2022-03-29 08:45:54	Web	22.3.0 - Machine performance: last known	FC		65348
			Machine performance can now show "last known" values in addition to shift/day/24h
1671	2022-03-29 08:44:32	Web	22.3.0 - Setuptime Production status widget	FC		66466
			Production status widget now always displays setuptime when the current stop is of type setup
1670	2022-03-29 08:43:43	Web	22.3.0 - Web permissions display	FC		67310
			Web permissions are now grouped and clarified in their display.
1669	2022-03-29 08:42:54	Web	22.3.0 - Dashboard only user	FC		67328
			It's now possible to configure a user to only have access to dashboards
1668	2022-03-29 08:41:53	Web	22.3.0 - SF 36 support in machinelist	FC		67393
			The dropdown menu to select machines now correctly displays machine_name only in case SF36 is enabled
1667	2022-03-29 08:41:08	Web	22.3.0 - Hide notifications	FC		67395
			Hiding notifications in settings no longer hides usage critical notifications.
1666	2022-03-29 08:40:10	Web	22.3.0 - Widget configuration clarification	FC		67399
			Changed display for widget configuration, moved machine selection to the top and clarified usage.
1665	2022-03-29 08:38:46	Web	22.3.0 - Configurable search on datatables	FC		67513
			It's now possible to enable search on all configurable tables, and select one or more rows to search through.
1664	2022-03-29 08:36:08	Web	22.3.0 - Dynamic sizing logged-in at machine	FC		67561
			Long names in the signed-in widget are now automatically resized based to better fit inside the widget
1663	2022-03-29 08:34:42	Web	22.3.0 - Stop reason sorting web.	FC		67579
			Bzx21 now sorts on stoppreason order by default.
1662	2022-03-29 08:10:28	Web	22.3.0 - Allow use of scale in report scrap SF325	FC		67832
			When SF325 is enabled the scale can now also be used to report scrap.
1661	2022-03-28 09:49:30	Client	22.3.0 - Scrap report - graphs	PJ
			A new report has been added, scrap report - graphs. This report show up to six different scrap graphs. Scrap per machine: shows amount of scrap for each machine. Scrap per machine, alt unit: shows amount of scrap for each machine in alternative unit 1. Target result per machine: Shows scrap% per machine and compares it to the Q% for the machine. Scrap cost: Shows the cost for the scrap on each machine. Scrap per scrap reason: Shows ammount of scrap for each scrap reason Scrap per scrap reason, alt unit: Shows ammount of scrap for each scrap reason, alt unit.
1660	2022-03-25 09:59:16	Client	22.3.0 - Duplicate warnings, processvaluelimits	JB		59382
			When saving processvaluelimits in Client, the user sometimes bumped into a generic error saying that the record could not be saved, but not why. A more informative errormessage is now showing.
1659	2022-03-25 09:55:38	Client	22.3.0 - Internal activities, overview	JB		56864
			When using the Internal activities overview for specific orders, the columns were not behaving as expected, and userlayouts were hard to use. That is now corrected. (If you are having this issue, just erase your settings and save a new layout in this version, and it should resolve itself.)
1658	2022-03-24 16:55:44	Client	22.3.0 - Toolcounters, readability	JB		57499
			The form for showing toolservicecounters were previously overlapping in headers, now it hsould be more readable
1657	2022-03-24 16:53:15	Client	22.3.0 - Robustness in Balthzar Wise-server	JB		67687
			As of v22.3.0 Balthzar Wise server is a bit more robust as more unforeseen, external errors are handled and recovered from than before
1656	2022-03-23 12:46:24	Client	22.3.0 Manual machine and shift breaks	JH		61912
			Adjusted some issues where manual machine would change status between shifts.
1655	2022-03-22 08:58:54	Collector	22.3.0 - Remapping between machines	JH		68004
			Adjusted issue where remapping between machines would not work properly
1654	2022-03-22 08:29:05	Client	22.3.0 - Stops and message group	JH		58607
			It is now possible to use message groups when sending mail/sms to users when a machine stop with a certain code.
1653	2022-03-22 08:26:25	Client	22.3.0 - Shift code and sum of C1 - C4	JH		57283
			Fixed issue where a machine using a sum of C1 - C4 as counter would set shift code 999 instead of 0 when running outside of calendar time entirely on C1 status.
1652	2022-03-22 08:00:47	Client	22.3.0 - Production report detailed	PJ		66506
			There are a 7 new selection criterias in production report detailed. Handle lines - If this is selected we only show the mother in each line. Show production graph - shows a graph over target quantity, produced quantity and scrap quantity. Show top x stop - Shows top x stops reasons on the machine order by stop time. X is determined by the show x stop rows selection, if it is set to 0 all stops are shown. Show x scrap - Shows top x scrap reasons on the machine order by scrap quantity. X is determined by the show x scrap rows selection, if it is set to 0 all scrap reasons are shown. Show summation - Adds an extra "All machines" machine that shows a summation for all machines in the selection criteria
1649	2022-03-22 07:58:51	Client	22.3.0 - Report changes	PJ		65876
			In the reports production report machine and follow up checklist it is now possible to select all/- in the parts selection to get all parts.
1648	2022-03-15 16:54:38	Client	22.3.0 - Alphanumeric linenumber	JB		67385
			As of v22.3.0, the linenumber of machines can be alphanumeric.
1647	2022-03-15 08:58:40	Client	22.3.0 - Shift report to file archive	PJ		66049
			It is now possible to get the shift report saved to the file archive automatically when it is signed.
1646	2022-03-08 10:42:01	Web	22.2.0.4 - Multisort tables	PJ		66070
			It's now possible to sort tables on multiple rows.
1645	2022-03-08 08:59:51	Etouch	22.3.0 - Max/min limit of manually reported qauntity in eTouch, enforced when printing pallet flags	JB		66882
			When reporting quantity via printing of palletflags, there was previously no restrains regarding reported quantity. As of v22.3.0, configured limits in Admin Max. manual quantity will be applied, both negative and positive.
1643	2022-03-07 15:22:45	Client	22.3.0 - Adjustment to SF239	JB		67005
			When using SF239 (Disabled userverification), starting space-characters where not trimmed, making it impossible to sign out that user, since the sign-out routine were trimming employees signed in. This is now fixed.
1642	2022-03-07 15:21:11	Client	22.3.0 - Start workorder by parts, new part info	JB		66050
			As of v22.3.0 a new datafield has been added, work_order_pack_qty to Admin of parts. The value entered here will be transferred to the started order, if order is started by parts.
1641	2022-03-07 11:45:06	Client	22.3.0 - Adjustments to SF321, speedgauges	JB		67048
			SF321 has been adjusted so that it now only uses generic company settings, meaning that one set of limits will be used for all machines using this function
1640	2022-02-23 16:10:58	Client	22.3.0 - Modal windwows, ERP-reporting	JB		67012
			In Balthzar Client, the form for reviewing ERP reportings were previously modal, meaning only one window could be open at a time. That restriction is now removed.
1639	2022-02-23 16:08:47	Client	22.2.0 - New header in Client	JB		56681
			A new header has been implemented in Client, with a more BZX21-like look. The old functionality remains. (Click on logo --> Download new version / Clear startfile)
1637	2022-02-22 12:34:30	Web	22.2.0 - Widget overview improvements	FC		66071
			It's now possible to sort and group on any key in the dataset in widget overviews.
1636	2022-02-22 12:32:14	Web	22.2.0 - SF 183 Tool structure support	FC		65984
			SF183 now supported in web.
1635	2022-02-22 12:31:19	Web	22.2.0 - Flex widgets	FC		65849
			Flex widgets, where it's possible to select what values/links are shown where have been added.
1634	2022-02-22 12:30:05	Web	22.2.0 - SF 356 last stopcodes	FC		65831
			SF356 has been added to BZX, it shows the last 10 used stopcodes on a machine when settings or changing a stopcode
1633	2022-02-22 12:28:28	Web	22.2.0 - Dashboard improvements	FC		65587
			Gauges can now start a minus values, production values can access planned and current order, status has a fourth mode that shows setup time, free text supports rolling text and production goals have been added
1632	2022-02-22 12:18:32	Web	22.2.0 - Dashboard Sql	FC		65830
			It's now possible to use custom SQL queries in the following dashboard components: Free-text, sql value gauge and sql graph.
1631	2022-02-22 12:12:49	Web	22.2.0 - Dashboard production-value save	FC		64895
			It's now possible to save individual production-value settings and load them in another production-value object in the dashboard environment.
1622	2022-02-22 12:11:56	Web	22.2.0 - Calendar	FC		64491
			Support for OEE - calendar in machine overviews and in running-order/production-statistics widgets.
1621	2022-02-22 12:09:58	Web	22.2.0 - Live data	FC		64484
			Showing live data is now possible in bzx21 through machine-specific widgets and specialized live-data overviews
1620	2022-02-22 11:58:59	Web	22.2.0 - Uncoded stops for my machines.	FC		59710
			Uncoded stops per department/zone/category now also supports my-machines
1638	2022-02-18 15:55:44	Client	22.2.0 - New header in Client	JB		56681
			The header in Client has been updated to look a bit more like the one used in BZX21. It's functioanlity is the same as before
1619	2022-02-17 13:15:39	Client	22.2.0 - New admin for static processvalues	JB		66451
			A new section in Admin has been added where nominal values, upper/lower limits and upper/lower reasonable limits can be administered, along with their corresponding colors.
1617	2022-02-16 10:43:49	Collector	22.2.0 - Collector and printing	JH		66578
			It is now possible to deactivate print check from Balthzar Collector if it is not needed.
1616	2022-02-16 10:41:58	Client	22.2.0 - Special function 344	JH		66311
			Added parameter to set which tool id mother must use to activate this function
1615	2022-02-08 14:55:40	Client	22.2.0 - Process value as counter and I/O	JH		56859
			When using a process value as a counter and/or an I/O it is now possible to create a machine transaction when the value changes. It is also possible to write the previous value on change. Lastly, you can set at wich rate transactions are created.
1614	2022-02-08 14:54:07	Client	22.2.0 - Process value and Wittra	JH	Wittra	65551
			We now support the usage of Wittra devices! For more information about Wittra please see https://www.wittra.se
1618	2022-02-01 14:30:13	Client	22.2.0 - Workorders, Client	JB		55100
			The previous grids showing planned, running and finished orders in Client, have been exchanged with a more functional counterpart, which makes it possible to save personlized gridsettings in them.
1613	2022-02-01 14:26:37	Etouch	22.2.0 Selected orderrow to end (SF334)	JB		65833
			When using SF334 (Shiftinfo), it was earlier possible to end an unintended row, due to the program assuming the first row was selected when in fact no row was selected at all. This issue has now been adressed.
1612	2022-01-26 13:59:02	Client	22.2.0 - report machine hours	PJ		63299
			It is now possible to create a personal layout for the report machine hours 2.
1611	2022-01-26 13:56:23	Client	22.2.0 - Calendar adjustment	PJ		65583
			Changed in calendar adjustment so that we no longer update the clock when the start time is set after the stop time. Instead we make a check when trying to save and informs the user that we cant save if the start time is set after the stop time.
1610	2022-01-20 13:33:12	Client	22.2.0 - Permission to code stops in client	PJ		64107
			It is now possible to set permission to code stop in client, by setting a user level on "Code stop in client". If a user does not have permisson, the button is removed. It is also possible to set permission to convert stops to runtime and runtime to stoptime by setting a user level on "Convert stoptime to runtime/ runtime to stoptime"
1609	2022-01-18 10:36:15	Client	22.1.0 - Cancel bundle	PJ		59113
			A new special function, 354, has been added. This allows you to cancel bundles from eTouch.
1608	2022-01-17 15:57:49	Client	22.1.1 - New fields in Admin, process_parameters	JB		55489
			Two new fields for administering user and passwords for object_machines_process_parameters have been added.
1606	2022-01-17 15:56:28	Client	22.1.0 - Reportsettings	JB		51458
			Users with userlevel 9 can now view and edit all settings related to reports for all users
1605	2022-01-17 14:14:56	Client	22.1.0 - Erase planned orders	JB		65122
			A new function has been added in the Client ERP-reportings form, which enables deletions of planned orders.
1604	2022-01-14 09:36:41	Status	22.1.0 - Balthzar status	PJ
			Changed how we ignore stops with the #SN5 Tag, so that we look at the stop_reason <> automatic_stop_reason instead of stop_reason <> "901"
1603	2022-01-07 14:14:21	Client	22.1.0 - Own overviews	PJ		64555
			The own overviews for machines, finished orders, ongoing order and scrap is now able to edit and remove. They are also possible to make available for all.
1602	2022-01-07 14:09:24	Client	22.1.0 - New report, checklist numerical values	PJ		63983
			A new report has been added where all checklist lines of type number is shown. There are two different section: Detailed, that shows detailed info about each row. Summation, shows a summation of the rows, grouped on Drawing number and measure position.
1601	2022-01-05 09:09:58	Etouch	22.1.1 - Inaccurate IA warning	JB
			When switching between machines who are using IA and machines that are not using IA in eTouch, the number of unfinished IA were warned about on the machine switched to without IA active.This is now correted.
1600	2021-12-17 15:13:51	Etouch	22.1.1 - Start WO by card (SF184)	JB		64554
			Special function 184 have been adjusted so that IFS is no longer a pre-requisite for using it. As long as one of Balthzars supported connectiontypes are used, this function should work.
1598	2021-12-14 08:50:52	Client	21.13.0 - Archive reports	PJ		63232
			It is now possible to always archive reports to a specified folder when a report is generated.
1599	2021-12-13 15:53:20	Etouch	21.13.0 - Starting orders without part description	JB		64306
			In earlier versions of eTouch, start order by list was not able to start orders containing parts which did not have a partdescription. This has now been adjusted.
1595	2021-12-13 09:25:33	Web	21.13.0 - Coloring orders	FC		61478
			SF347 now allows for coloring running orders in the widget based on shift\|today\|24h and limits T\|A\|K\|TAK Finished order widget can now be colored based on T\|A\|K\|TAK
1594	2021-12-13 09:22:41	Web	21.13.0 - Data Visualizations	FC		63920
			Data visualizations now available, first version of availability view now accessible through the menu.
1593	2021-12-13 09:21:12	Web	21.13.0 - Production goals	FC		62095
			It's now possible to define production goals in the admin panel. Widgets/functionality will follow.
1592	2021-12-13 09:20:24	Web	21.13.0 - Dashboard confirm delete	FC		63306
			It's now significantly harder to accidentally delete a dashboard.
1596	2021-12-13 09:18:03	Web	21.13.0 - Dashboard ease of life changes	FC		63981
			Dashboard configuration is now more careful when rendering previews, which prevents the application from locking up when previewing with incomplete configurations. Dashboard configurations now get cleared when selecting a new component on a previously configured object.
1591	2021-12-13 09:18:03	Web	21.13.0 - Dashboard Copy	FC		63307
			It's now possible to copy web dashboards.
1590	2021-12-13 09:15:28	Web	21.13.0 - Settings.json	FC		63371
			It's now possible to define allowed company id's for login in a confugration file put in the root folder of the web program.If settings.json is defined only company_id's listed are available to choose from (and will be pre-chosen in case of a singular id).
1597	2021-12-09 15:59:40	Client	21.13.0 - Change card_no (company-specific update)	JB		64113
			Company_ID 5054 have got their companyspecific function for changing card_no revised according to new conditions.
1589	2021-12-09 15:57:11	Etouch	21.13.0 - Shown stopcodes in eTouch	JB		51282
			In earlier versions of eTouch, stopcodes were shown as available stopcodes during normal productiontime. This is now corrected.
1588	2021-12-06 16:38:50	Etouch	21.13.0 - Double printouts of palletflags	JB		63579
			In earlier versions of eTouch, double printouts could be made during certain conditions. A generic measure that prevents this has been implemented which should adress all of those cases.
1587	2021-12-06 16:36:06	Etouch	21.13.0 - SF321 : Speedgauges disappears	JB		63879
			Under certain conditions, the speed gauges for SF321 disappears, and a potantial reason for this has been eliminated.
1586	2021-12-06 12:11:39	Web	21.13.0 - Quick exit from tabbed displays	FC		59334
			Tabbed displays display a quick exit button if you're past the first tab.
1585	2021-12-06 12:11:02	Web	21.13.0 - Finished orders	FC		63308
			Finished orders now accessable from their own menu point
1584	2021-12-06 12:09:37	Web	21.13.0 - Order details	FC		58619
			Current order, running order, and finished order widgets can now display order details (in popup). Similarly for running order and finished orders overview.
1583	2021-12-06 12:03:28	Web	21.13.0 - Widget configuration propagation	FC		62985
			People with permission can now save widget settings server side, where they will be linked to the template currently used.
1582	2021-12-03 14:41:07	Client	21.13.0 - Report settings saver	PJ		63393
			If you save a report setting as available for all, other users can se and load the settings in the report generator. Previously it only became available in quick reports.
1580	2021-11-24 10:17:46	Web	21.12.0 - Production-result widget	FC		62060
			Production result widget added
1579	2021-11-24 10:10:29	Web	21.12.0 - Resume setup support web	FC		59460
			Resume setup supported by web now, including SF 326.
1578	2021-11-24 10:08:55	Web	21.12.0 - Web reports	FC		61454
			Report ordering/scheduling from web
1576	2021-11-24 10:05:44	Web	21.12.0 - Time History in dashboard	FC		61088
			Time History now available in dashboard, time history also available for shift.
1581	2021-11-22 15:06:22	Client	21.13.0 - Line no preventing machine save/updates	JB		62270
			In earlier versions, Balthzar Admin could not save a machine belonging to a machineline called anything with inital zeros. That is now fixed.
1574	2021-11-19 10:55:33	Client	21.12.0 - Production report detailed	PJ		61388
			Four new selection possibilities has been added to the report production report detailed. Show shift information, shows which shifts we have actually found data for. Show production data, alt. shows production and base roll data. Show turn-out, shows average speed in alternative unit. Show part info, simple, shows a list of all parts that have been run in the interval.
1575	2021-11-19 10:55:33	Client	21.12.0 - Production report machine	PJ		61388
			Three new selection criterias has been added, Show shift information, shows run time, prod time and average speed for each shift Show alt. part info, shows run time, prod time and average speed for each part. Parts, a multiselect for parts where you decide which parts to include in the "show alt part info" box.
1573	2021-11-18 10:55:30	Etouch	21.12.0 - WO-start confirmation SF302	JB		59107
			When using start workorder by list (SF302), there was no message telling the user that any workorderstart went wrong when that occurred. This has been clarified.
1572	2021-11-18 10:52:52	Client	21.12.0 - Graphical history by hour, first hour	JB		62924
			A bug causing the first hour of the graphical history by hour to be displayed incorrectly, in Client has been corrected.
1571	2021-11-17 16:29:08	Etouch	21.12.0 - SF328 / SF 323	JB		59195
			Two interconnected specialfunctions have been developed, 328 which updates the workorder- column pallet_total, and 323, which displays current pallet out of (planned workorder quantity / qty_per_pallet rounded up). An additional feature is the ablity to color the displayed text red as the final amount of pallets is getting close. See documentation for further info.
1569	2021-11-15 16:20:34	Etouch	21.12.0 - Start order by list, rowheight	JB		59646
			Specialfunction 302 now has an option to override the default touchUI-enabled look of the start workorder by list - form. When doing that, smaller fonts can be used and in that way more rows displayed.
1566	2021-11-12 11:23:22	Client	21.12.0 - report followup checklist	PJ		61416
			Added two new selection criterias to the report followup checklist. Status, a multiselect where you can select which statuses to show in the list of activities. Show deviations, shows a sum of all deviations divided by checklist and machine.
1565	2021-11-10 10:50:49	Client	21.12.0 - Edit running order	PJ		62350
			Fixed an issue in edit running order in client where we failed to restart the order after editing.
1564	2021-11-05 11:26:57	Etouch	21.12.0 - Synkronized materials lost	JB		61418
			A rare situation where materials synchronized from the ERP system used, to Balthzar, has been corrected.
1563	2021-11-05 11:25:05	Etouch	21.12.0 - Columnchooser in eTouch	JB		62105
			A bug which wrongfully periodically displays the columnchooser for grids, have been fixed.
1562	2021-10-13 11:06:04	Client	21.11.1 - Cloned process value	JH		61152
			Fixed issue where sometimes a clone process value would not register first change.
1561	2021-10-11 16:03:14	Etouch	21.11.0 - Pallet printouts, eTouch	JB		60238
			When using the specialfunction 285 and printing palletflags, you would end up in a situation where you were asked to enter employee even if no employee field was shown. This is now corrected. (No employee should be entered in this scenario.)
1559	2021-10-11 15:37:57	Etouch	21.11.0 - Internal activities-warning in eTouch	JB		60607
			The message warning the user about unfinihsed internal activities in eTouch has been adjusted to show the number of quantities in the top of the message, hopefully adding readability.
1560	2021-10-11 15:21:27	Etouch	21.11.0 - SF132 adjustments 3	JB		60605
			When using SF132, the translationphrases were a bit misleading. They ambiguities have now been clarified.
1557	2021-10-11 15:21:27	Etouch	21.11.0 - SF132 adjustments	JB		60895
			In SF132 the user no longer needs to enter zero for deviations, any edited row is considered to contain 0 as quantity.
1558	2021-10-11 15:21:27	Etouch	21.11.0 - SF132 adjustments 2	JB		60888
			In SF132 there are now two separat sets of tablesettings available, one for deviations and one for scrap.
1556	2021-10-11 09:30:00	Client	21.11.0 - List and status in Internal activity	JH		59062
			It is now possible to set which status a choice in a list gives to the internal activity.
1555	2021-10-07 14:18:51	Etouch	21.11.0 - eTouch, removed flicker	JB		60837
			When using certain sepcial functions in eTouch, a annoying flicker could occur due to values being updated in sequence on the screen. A case when this occurrs is when using SF320, which is now fixed.
1554	2021-10-05 15:01:28	Etouch	21.11.0 - New SF, only start by part	JB		59858
			A new special function has been developed which hides the standard button Start in eTouchs Workorder function, and replaces it with a larger version of the Start by part button, normally available via SF5.
1553	2021-10-05 15:00:04	Etouch	21.11.0 - New SF, suggested pallet quantity	JB		60758
			A new special function (340) has been developed which suggest quantity on pallet when printing pallet flags in eTouch. Suggested quantity comes from object_work_order.qty_per_pallet.
1552	2021-10-01 08:53:17	Client	21.11.0 - New SF337	PJ		60384
			Added new special function, report to erp through pallet flag. When this SF is active we report the quantity on pallet flags to erp.
1551	2021-09-30 10:23:58	Web	21.11.0 - Operationstext	PJ		60227
			Ability to show operationtext in BZX
1550	2021-09-30 10:22:51	Web	21.11.0 - Widget selection update	FC		60217
			Widget selection process updated with widget previews and drag functionality.
1549	2021-09-30 10:21:05	Web	21.11.0 - Table Configuration	FC
			Now possible to choose columns in web tables
1548	2021-09-30 10:03:27	Web	21.11.0 - Support for SF326	FC		59448
			From this version on, SF326 is supported in BZX
1547	2021-09-28 15:03:15	Client	21.11.0 - Export of processvalues	JB		59456
			A new procedure has been developed which performs a conditional export of data from the balthzar_logger-database of process values.
1546	2021-09-20 09:12:46	Client	21.11.0 - new SF333	PJ		59298
			A new SF has been added, Calculate scrap after scanned base roll. If this is active we add scrap reported to base rolls into manually reported scrap too. We also check how much the baseroll weights and compares it to how much manually reported quantity we have, if they differ we make a new manually reported scrap with the difference
1545	2021-09-14 14:30:15	Client	21.11.0 - New SF (335)	JB		59859
			With this special function active, SF132 does not require verification of entered part_no, it does however require it to be non-blank
1541	2021-09-14 10:28:25	Client	21.10.0 - Calculate cavities at order start	PJ		59240
			A new special function has been added SF331 If this special function is active we should calculate how many cavities there is on each order at order start. The cavities are calculated as (order planned quantity)/ (all running order planned quantity)
1536	2021-09-14 10:19:30	Client	21.10.0 - new SF 330, code shift manually	PJ		59020
			A new special function has been added SF330 If this SF is active eTouch wars the user if the current shift code is negative (between -100 and -10). The user in eTouch can the code what real shift code is running. We then updates all old posts on the shift to this new code.
1535	2021-09-13 09:33:37	Client	21.10.0 - Calendar adjustment	PJ		59018
			In calendar adjustment we can now create and adjustment for a specific calendar.
1543	2021-09-10 09:18:28	Client	21.10.0 - Toolstatus	JB		58916
			In Admin for tools, a toolstatus columns has been added describing the current status of a selected tool. These statuscodes are by default mapped to the codes used by Monitor, however they can be customized freely by using companyspecifik translationterms.
1534	2021-09-09 11:34:29	Etouch	21.10.0 - New SF, Calculate number of pallets	JB		59195
			A new special function, 328 has been developed which calculates the workorder field pallet_total as planned quantity divided by quantity per pallet.
1531	2021-09-08 13:47:36	Etouch	21.10.0 - Clearer cancellations	JB		59449
			In eTouch when cancellations were created, no message was shown either when it did succeed or when it failed. This is now changed, and retries have been added if failed attempts are done.
1530	2021-09-07 15:40:19	Etouch	21.10.0 - Adjustment to SF132	JB		59299
			A additional check that prevents using the SF132 function if no order is running, has been added.
1529	2021-09-07 15:31:00	Etouch	21.10.0 - New SF, alternative setupcode	JB		59064
			A new specialfunction (SF326) has been developed which enables entering a userdefined stopcode, (coded as setup among stopcodes in Admin), when using firstpiece control.
1528	2021-09-07 10:22:11	Etouch	21.10.0 - Additions to SF132 - SF329	JB		59296
			When using SF132, a new SF (329) can be used concurrently which allows saving a From_machine-field, using a userconfigured rules for this, based on the barcode scanned.
1526	2021-09-01 15:35:33	Client	21.10.0 - Added part info 26-100 to Checklists	JH		59248
			It is now possible to select part info 1 - 100 when using part info as limits or conditions in internal activity checklists.
1524	2021-09-01 10:06:09	Client	21.10.0 - Process value as total order quantity	JH		59007
			It is now possible to automatically adjust the good quantity on a currently running order to the value of a process value.
1522	2021-09-01 10:04:39	Client	21.10.0 - OPC-machine and initialization	JH		59003
			Adjusted issue where sometimes an OPC-machine could create transactions without all signals being properly initialized.
1521	2021-08-27 14:09:39	Client	21.9.1 - Minor interface adjustment	JB
			The incrementation of version from 21.9.0 to 21.9.1 derives to a minor formatting adjustment of presented information in the eTouch user interface
1520	2021-08-24 14:57:11	Client	21.9.0 - Internal activity and limits from part	JH		57442
			It is now possible to get input limits from part info.
1519	2021-08-24 13:10:59	Client	21.9.0 - Toolstatus, Admin	JB		58916
			A new field has been added in the Tools admin form, displaying the toolstatus in cleartext, as opposed to a single digit. These statustexts are taken from the Monitor ERP system, and correspond to those used there, which implies that a synchronization between Monitor and Balthzar is done on a regular basis.
1518	2021-08-24 11:53:24	Etouch	21.9.0 - Show erp resource in eTouch.	JB		57287
			A new special function (324) has been developed which displays planned erp_resource on planned orders in eTouch.
1517	2021-08-24 11:49:55	Client	21.9.0- Pallet, current - New sf	JB		57483
			A new special function (323) has been developed which displays current pallet out of planned number of pallets.
1516	2021-08-24 11:42:44	Etouch	21.9.0 - Show produced total in eTouch, new SF	JB		57481
			A new specialfunction, 320, has been developed which displays total number of parts produced (good + scrapped) instead of cycles today, in eTouch.
1514	2021-08-13 15:33:30	Etouch	21.9.0 - New data in materialreporting	JB		57239
			Previously workordernumber and operationnumber were not always entered on materialreporting records, due to it not being needed when reporting to Monitor. This is now fixed, if Monitor is used with erp_connectiontype = 1.
1507	2021-08-10 11:23:43	Etouch	21.9.0 - Show speedgauges in eTouch, new SF	JB		57476
			A new specialfunction, SF321, has been developed which displays two speedgauges in eTouch. One displays a customizeable number, the other a percentage of real compared to planned speed. Min/max values of each gauge as well as range-values are customizeable.
1508	2021-08-10 11:23:43	Etouch	21.9.0 - Show setuptime in eTouch, new SF	JB		57478
			A new specialfunction, SF322, has been developed which displays consumed setuptime for workorders in progress, and planned setuptime for planned orders, in eTouch.
1506	2021-08-03 08:43:38	Client	21.9.0 - Deletion of workorders in Balhtzar Client	JB		58088
			An issue with the functionality of deleting previously created workorders in Balthzar Client have been resolved. The dropdown containing machines for each operation have been exchanged to a textbox.
1505	2021-07-21 11:25:07	Client	21.9.0 - Production report detailed	PJ		56561
			A new selection criteria is added to the report production report detailed, show stop text. When this is active we show a summation of all stop text under each stopreason on each machine.
1504	2021-06-28 13:28:40	Client	21.9.0 - Buffered values	PJ		57334
			Fixed so that the webservice buffer return strings instead of datetimes.
1503	2021-06-23 10:30:25	Client	21.9.0 - Report headers	PJ		56704
			Fixed an issue where the tags is report headers had stoped working for some of the reports
1502	2021-06-23 10:28:25	Client	21.9.0 - Automatic stop reasons	PJ		57196
			Fixed admin for automatic stop reasons so that it is once more administratable.
1501	2021-06-22 10:02:10	Etouch	21.9.0 - SF119 changes	JB		57169
			The warning message shown by SF199 saying that a certain amount of time is being counted down, is changed when reaching zero, indicating duration in excess of planned time. In earlier versions negative time was displayed.
1500	2021-06-22 09:58:41	Etouch	21.9.0 - Notes in eTouch	JB		57163
			In earlier versions of eTouch, the Notes function were not updating eTouch correctly, making a newly added text appear empty. This has been adjusted
1499	2021-06-16 11:15:57	Etouch	21.9.0 - OPC_value for real speed (SF84)	JB		#56826
			In earlier versions of eTouch, this functionality didnt perform as expected, which now is corrected.
1498	2021-06-15 16:35:41	Client	21.9.0 - Machine ID change updates active SF	JB		56666
			In earlier versions of Balthzar Client, active specialfunctions were not updated when a machineID-change were performed. Now it is.
1497	2021-06-15 16:33:06	Etouch	21.8.0 - Materialreporting in eTouch	JB		56955
			When using materialreporting from Historical orders in eTouch, wrong alternatives in regards to warehouse could, under certain circumstances, be displayed. This is now fixed.
1496	2021-06-15 08:59:18	Client	21.8.0 - Internal activity	PJ		56266
			Fixed som issues in internal activity where we got some problem when other timezones than the server had were used.
1495	2021-06-15 08:56:28	Collector	21.8.0 - Pyramid start mark on order	PJ		56494
			When we start a work order in pyramid we now immediately send a start mark to pyramid to prevent the order from being removed.
1494	2021-06-07 11:16:37	Etouch	21.8.0 - SF296, support for planned orders	JB		54670
			Special function 296 has been extended to include planned orders in addition to running orders, as of v21.8.0.
1493	2021-06-07 11:13:17	Etouch	21.8.0 - Running orders, saving columnsettings	JB		56295
			Previous versions of eTouch have had issues reloading the running orders grid more frequent than needed. This, in turn, made saving new columnsettings impossible. This has now been fixed.
1492	2021-06-04 11:26:00	Etouch	21.8.0 - Return of the old overview/machinelist	JB		56610
			Listening to feedback from users, it turns out that the old version of eTouchs overview and machinelist were more popular than the new one, so it has returned from v21.8.0
1491	2021-06-04 11:23:08	Etouch	21.8.0 - Runtime of manual machines	JB		56618
			In earlier versions of eTouch, under certain circumstances, you could end up with a signed in employee and still not be able to change status of the machine from stopped to running. This is now corrected.
1490	2021-06-02 15:34:21	Etouch	21.8.0 - man_qty correct when signing out	JB		56518
			In earlier versions of eTouch, signing out an employee set man_qty = NULL for remaining employees already signed in. This is now corrected.
1489	2021-05-31 16:44:41	Client	21.8.0 - Changes to SF302	JB		56401
			As of v21.8.0, special function 302 (Start workorder by list) has been adjusted so that error-messages preventing workorderstarts are presented inside the grid.
1488	2021-05-25 09:07:20	Client	21.7.0 - SF90 printout adjusted	JB
			The SF90 printout application has been adjusted according to usage feedback, in order to increase useability.
1487	2021-05-25 09:03:59	Etouch	21.7.0 - Workorderstart on the go adjusted (SF266)	JB
			Special function 266 has been adjusted so that if cancellation SF47 is active in parallell with SF266, cancellations are created on the ended order automatically.
1486	2021-05-25 08:53:07	Etouch	21.7.0 - TraceID adjustments (SF 278)	JB
			Special function 278 have had its logic adjusted regarding how groupIDs are assigned, making it more robust and working as originally intended.
1483	2021-05-03 08:44:40	Etouch	21.6.0 - SF316 Fetch document from server	PJ		55088
			A new SF, 316, has been added. If this is active eTouch tries to download its document from the server instead of opening the file on the designated path. If it fails to download the document from the server it still tries the designated path.
1484	2021-04-29 08:14:58	Client	21.6.0 - Internal Activities and Lists	JH		55371
			Adjusted issue where sometimes lists would use wrong value when using multiple lists.
1482	2021-04-29 08:13:55	Client	21.6.0 - OPC-UA and Password	JH		55465
			OPC-UA connection now support simple Username/Password authentication.
1480	2021-04-27 08:02:58	Etouch	21.6.0 - Doubleclick in Overview and Machinelist	JB		55398
			The new overview and machinelist in eTouch now have support for doubleclick, as a means of switching to selected machine.
1476	2021-04-23 14:11:25	Client	21.6.0 - Report OEE - Data 2	PJ
			The report OEE - Data 2 is now possible to sort on A%, P%, Q% and OEE%. It is possible to get it in ascending or descending order.
1475	2021-04-23 07:18:49	Client	21.6.0 - Planned and running orders	JH		55273
			If the order has been started in balthzar the following fields will now be available in the planning: - total produced quantity in different units - total scrapped quantity in different units - remaining quantity in different units - estimated remaining time - total cycles
1474	2021-04-22 07:17:49	Client	21.6.0 - I.A own and user verification	JH		55254
			Adjusted issue where verification of user in I.A own could fail
1472	2021-04-19	Client	21.6.0 - Events for IA creation	JB		54747
			As of v21.6.0, events are created when Internal activities are created.
1473	2021-04-19	eTouch	21.6.0 - Events for signing in/out at machine	JB		54674
			When signing in/out at machines, events are created as of v21.6.0. When/if Balthzar decides to sign out employees at shiftchange, events are created for each employee signed out this way.
1469	2021-04-12 13:48:32	Client	21.6.0 - Calendaradjustments	JB		54258
			In previous versions of Balthzar, calendaradjustments were not considered in every report. We have now identified a few of those cases, and fixed them.
1465	2021-04-09 11:41:05	Client	21.6.0 - Multiple conditions	JH		54777
			Adjusted issue where several checklist rows could be linked to the same multiple condition.
1462	2021-04-07 11:35:23	Client	21.6.0 - OPC-Connector and Balthzar Local	JH		54297
			Adjusted issue where it could take time before Balthzar Local settings set via OPC-Connector where used.
1461	2021-04-07 11:09:04	Client	21.5.0 - New report OEE% per month	PJ		54184
			A new report has been added, OEE% per month. This report can show OEE& per month and also A%, P% and Q% per month. This report is possible to run over a larger time span and show percentage each month under the selected time span for each selected machine.
1460	2021-04-06 11:51:08	Etouch	21.5.0 - Adjustements to documentviewer eTouch	JB		54526
			The documentviewer in eTouch has been adjusted so that erroneous wildcard-paths entered in Admin are displayed in eTouch, making them more apparent and hopefully more easy to identify and correct.
1457	2021-04-06 11:49:33	Client	21.5.0 Confirmation of deletion	JB		54527
			When deleting records previously registered in Manual documents, a confirmation-question is now asked, to prevent accidential deletions.
1459	2021-04-06 07:45:26	Client	21.5.0 - Internal activities and company settings	JH		54579
			Will now check if the provided company id and key is valid before proceeding when running internal activities as a standalone application.
1456	2021-03-31 13:27:34	Client	21.5.0 - Changes to SF292	JB		#54524
			Special function 292 has been adjusted so that started orders with these configured parts never gets their last_op-column set on started orders. Primarily done in order to avoid reporting errors in Monitor when running orders with parts that has no balancehandling.
1454	2021-03-23 10:50:22	Etouch	21.5.0 Machinelist - up/down arrows	JB		54300
			eTouchs machinelist now has up/down arrows, assisting in machineselection.
1453	2021-03-23 10:48:18	Etouch	21.5.0 - New eTouch overview	JB		53882
			A new overview has been developed for eTouch which makes displaysettings configurable, meaning the standard options for grids such as font, size, columnsettings and columnorder.
1452	2021-03-15 16:17:47	Etouch	21.5.0 - Adjustments to SF192	JB		53865
			Specialfunction 192 Prevent overreporting by percentage, has been adjusted to work without Monitor as used erp_system. Verification of reported quantity is now done towards values in the Balthzar database.
1451	2021-03-10 15:02:42	ERP	21.5.0 - Report machine transaction on stop order	JH		51360
			It is now possible to resume all delayed machine transactions on an order X-hours after that order is stopped. This function is used together with SF311.
1450	2021-03-10 14:56:45	Client	21.5.0 - Special Function 311	JH		51360
			Special function 311 will delay reporting of machine transactions to ERP-system. The transactions will be delayed until an external event allows reporting to resume.
1449	2021-03-10 09:22:01	Client	21.4.0 - Production report detailed	PJ		53347
			New optional columns have been added to production report detailed, Show quantity, alternative unit. Shows quantity in alternative unit. Show order info. Shows info about the orders run on the machine during the interval. Show order info alt. unit. Shows info about the orders run on the machine during the interval in alternative unit.
1448	2021-03-01 11:55:05	Client	21.4.0 - Automatic scrap in percent	JH		53033
			The new function Automatic scrap percent makes it possible to always scrap a certain percent of the produced quantity. The scrap is performed continuously whilst the order is running.
1447	2021-03-01 08:38:57	Client	21.4.0 - Report time distribution stop reason dep.	PJ		52980
			It is now possible to sort the stop list on number of stop or stoptime. It is also possible to show stop notes in the report.
1443	2021-02-19 10:42:01	Client	21.4.0 - Calendar adjustment	PJ		10280
			Fixed an issue so that it is no longer possible to create calendar adjustment with end time before start time.
1442	2021-02-19 10:29:14	Client	21.4.0 - Report oee data	PJ		51102
			Fixed so that it is once again possible to group the report oee data on employee.
1441	2021-02-18 09:48:01	Status	21.4.0 - Last known cycle time	JH		52927
			It is now possible to activate calculation of last known cycle time. This calculation occurrs once each fifth minute on all machines with more than 4 minutes run time in that interval.
1440	2021-02-15 12:01:11	Client	21.3.0 - SF265	PJ		52924
			Changed so that we use machine capacity factor when starting orders with SF265 instead of 1 as we previosuly used.
1439	2021-02-15 08:33:31	Client	21.3.0 - Handle bundles	PJ		53034
			It is now possible to update the quantity in a bundle. It is also possible to update running order quantity when started with a bundle.
1438	2021-02-15 08:23:47	Client	21.3.0 - Free bundles	PJ		52845
			A new special function has been added, 309, if this is active we can start bundle from one machine on another machine. We will then search the macine for work orders with matching work order number and start them.
1437	2021-02-11 08:22:40	Etouch	21.3.0 - eTouch, cosmetic changes	JB		50638
			As of v21.3.0, eTouch uses the default DevExpress skin of its standard form. Further on additional forms will be converted to use this setting as well.
1435	2021-02-11 08:20:05	Client	21.3.0 - Adjustments to SF292	JB		#52897
			Previously specialfunction erroneously removed firstpiececontrol of orders which it should not affect, this is now adjusted.
1434	2021-02-10 15:11:04	Client	21.3.0 - Lock checklist row if outside limit	JH		51984
			Adjusted issue where sometimes a row would not be locked even though the entered value was outside the reasonable limit.
1433	2021-02-08 15:28:03	Etouch	21.3.0 - Orange is the new red (SF306)	JB		52788
			Since red is used to mark overdue planned orders, orange is used instead of the originally red color, in SF306.
1432	2021-02-03 14:47:37	Client	21.3.0 - Arithmetic and subscription rate	JH		51762
			Process values of type Arithmetic now supports subscription rate. In short, this means that the process value will not change more often then the subscription rate regardless of how often the underlying values changes.
1430	2021-02-02 14:22:06	Client	21.3.0 - Transaction counter from OPC	JH		51763
			Process values can now be used as counters on all 8 I/O positions of the transaction
1429	2021-01-28 08:56:37	Etouch	21.2.0 - eTouch menu, stopreasons	JB		52596
			Since quite a few users mistakenly clicks the menu item Stop reasons when receiving warning about uncoded stops, the menuitem Stop reasons has been re-directed in this particular case, to the form for coding uncoded stops. In all other respects, this button does what it did earlier.
1428	2021-01-28 08:54:23	Etouch	21.2.0 - Revision, colorcoded varning eTouch	JB		52400
			A new special function (306) has been developed which marks planned orders in eTouch in red if the combination of operation/part/revision has not been run earlier.
1427	2021-01-20 13:41:27	Client	21.2.0 - Units and Parts	JH		52121
			It is now possible to specify which units a part is produced in as well as what alternative units are used. This is only supported when using parts in balthzar.
1426	2021-01-20 10:34:15	Client	21.2.0 - New operationcard printeroption avaialble	JB		51897
			In Admin, a new field has been added called Printer opcard (eTouch-parameters tab 2), which makes it possible to use a dedicated printer for standard operationcard printouts. If not used, standard palletflag-printer is used as previously.
1425	2021-01-19 16:44:53	Client	21.2.0 - Productiongroup documents in Monitor	JB		52208
			Documents attached to productiongroup in Monitor, were erroneously shown in earlier versions of eTouch, now it should be as originally intended.
1424	2021-01-14 11:16:08	Client	21.2.0 - Order update failed	JB		51943
			In v21.1.0 the message Order update failed! - message was erroneously shown when no orders were running.This has been corrected.
1423	2021-01-11 13:23:29	Client	21.1.0 - Own pivot grid overview	PJ		51140
			A new overveiw type pivot grid has been added. This overview shows a pivot grid. It is possible to also show a graph in this overview by selecting two sql queries.
1422	2020-12-30 15:20:02	Client	21.1.0 - Colorcoded planned workorders, SF305	JB		50762
			A new special function has been developed which extends special function 302 Start order by list so that planned orders are color coded according to predefined conditions. Requires Jeeves to be used.
1421	2020-12-29 10:47:10	Client	21.1.0 - Planned orders, eTouch	JB		51252
			When switching to a machine with no planned orders, planned orders from the previous machine remained in earlier versions of eTouch. This is now adjusted. (This would result in wrong orders being displayed and potentially started on the machine switched to.)
1420	2020-12-28 14:22:29	Client	21.1.0 - Retries in SF286	JB		51618
			In earlier versions of eTouch special function 286 (Ordersynch line) only tried to start each order once for each machine in the affected line. Now up to 10 attempts are made. If this still is not enough, we are not trying further, assuming its futile. The same rule applies when ending orders.
1419	2020-12-28 14:18:16	Client	21.1.0 - Sorting in SF254	JB		51618
			In earlier versions, eTouch did not take view_order into account when displaying scrap-reasons in eTouch while special function 254 (Machinespecific scrapreasons) is active. Now it does.
1418	2020-12-23 09:53:01	Client	21.1.0 - SF90 printout application	JB		51170
			A customer specific application for SF90 has been developed which makes ordering printouts possible.
1417	2020-12-17 11:37:02	ERP	21.1.0 - Last operation to warehouse location	JH		51468
			It is now possible to set a fixed warehouse location for last operation when reporting to Monitor. This means that all quantity will be reported to this location if the order is last operation.
1416	2020-12-17 10:47:55	Etouch	21.1.0 - SF292 is adjusted	JB		#51460
			Documentation of SF292 was previously somewhat dodgy, and has now been clarified. Good quantity is only reported on workorders which match the part-category, even if the SF is active. (Earlier, unconditional reporting was made.)
1414	2020-12-15 16:18:39	Client	21.1.0 - Print operation card using Jeeves	JH		51173
			When running Jeeves it is now possible to print operation card in Jeeves from Balthzar. Printout is triggered from Balthzar and Jeeves will conduct the actual printout.
1413	2020-12-15 08:04:20	eTouch	21.1.0 - SF302 -Start order by list	JB		50987
			A new specialfunction 302 has been developed which makes starting multiple orders by selecting them in a list, possible.
1411	2020-12-14 13:23:29	Client	21.1.0 - Own overview	PJ		51140
			The own overviews created in client is now opened in a seperate window instead of in the client. It is possible to set a automatic update frequency so that the window keeps its data fresh.
1412	2020-12-14 07:41:55	Client	21.1.0 - Adjustment of materials at order stop	JH		51158
			Added new special function to adjust packaging materials after order is stopped. The materials will be adjusted to a whole number.
1410	2020-12-09 14:00:00	Etouch	21.1.0 - Retries from eTouch	JB		51295
			Previously, when eTouch for some reason failed to send stopcodes to the Balthzar-server, there was no indication of this when it occurred. As of v20.0.27 a retry-message appears, giving the operator a option to retry his/her last action, when failures occur, if they occur.
1409	2020-12-08 08:29:08	Client	21.1.0 - Report oee data	PJ		51019
			Added an average sum on M, P, Q and OEE values in the report oee data 2
1408	2020-12-04 08:20:51	Client	21.1.0 - Production report different unit	PJ		48054
			Added a new selection value to the report, suppress negative values. When this is used we can no longer get negative quantity values.
1407	2020-12-04 08:19:03	Client	21.1.0 - Production report different units	PJ		49174
			The report production report different units no longer includes quantity if the machine is run without order. A new column has been added, run time without order.
1406	2020-12-03 14:47:47	Client	21.1.0 - Performance monitor and table sizes	JH		50414
			I client performance monitor it is now possible to see how big each table in the balthzar database is.
1405	2020-12-03 14:45:46	Client	21.1.0 - Subscription type Value at change	JH		51010
			A process value of subscription type Value at change will no longer get New value when the OPC-connecter starts, but rather when the first actual change of value after start up.
1404	2020-12-02 14:36:29	Client	21.1.0 - Process value and clone	JH		50986
			It is now possible to clone a process value. In short, this means that a process value gets its value from another process value.
1403	2020-12-02	eTouch	20.0.26 - Jeeves, materialimport	JB		50731
			Customers using Jeeves as erp-system, can now import their materials to Balthzar via Balthzar_ERP_connect, for viewing in eTouch. An extension of this functionality is in the development queue integrating reporting of materials to Jeeves.
1402	2020-12-01 13:18:33	Client	20.0.26 - Rejection report	JH		51032
			Adjusted issue where Rejection report could fail to generate due to date format.
1401	2020-12-01 13:17:46	Client	20.0.26 - Cancel manual scrap in client	JH		50781
			Adjusted issue where cancellation of manual scrap in client sometimes failed.
1399	2020-12-01 11:10:29	Client	20.0.26 - Start parts	PJ		50738
			Added two new field to parts, alternative unit recalc factor and alternative unit recalc factor 2. When starting order by part, we use these values on the work order.
1400	2020-12-01 08:51:33	Client	20.0.26 - Manual reportings	JH		51017
			Added several new fields to manual reportings form in client.
1398	2020-12-01 08:48:37	Client	20.0.26 - Difference scrap on different machine	JH		50705
			When using scrap on difference between IO/0 and IO/1 it is possible to scrap on another machine. Note that the other machine must be running an order when the scrap occurr.
1397	2020-12-01 08:46:46	Client	20.0.26 - Internal Activity checklist	JH		50894
			Adjusted issue where a checklist for Internal Activity was unable to save All as condition for machine.
1394	2020-11-30	Status	20.0.26 - Counter2	JH		50780
			Adjusted issue where sometimes counter2 could be calculated as a negative number.
1395	2020-11-30	Status	20.0.26 - Counter2 and max value	JH		50780
			Added new setting to prevent Counter2 to exceed a certain value.
1393	2020-11-28	eTouch	20.0.26 - Verify employee at Balthzar	JB		50977
			With the new special function 299 active, employee verification will be performed at Balthzars DB instead of the default mechanism for doing so, meaning ERP-verification can be overridden.
1391	2020-11-26	eTouch	20.0.26 - HTML enabled info-boxes	jb		50931
			A new special function 298 has been developed which enables HTML tags in the labels used by special function 238. So far the HTML support is limited to text-formatting. This HTML format also replaces the message boxes in special function 43, 44, and 45, if enabled.
1390	2020-11-26	eTouch	20.0.26 - Workorderstart warning, no previous qty.	JB		50759
			A new special function (297) has been developed which warns if the previous operation does not have any quantity reported, or if it was not started. The warning can be overridden, but doing so creates a log record locally. Operations numbered as 10 or lower are disregarded by this functionality since it is assumed it might be the first operation
1392	2020-11-26	eTouch	20.0.26 - Blueprintexport	JB		50931
			When using Pyramid as an ERP system, exporting blueprints attached to exported work orders are now available. Those, in turn, are possible to review via the normal document function in eTouch, if special function 296 is activated.
1389	2020-11-23	eTouch	20.0.26 - Alternative printer at re-printing palle	JB		50889
			As of v20.0.26, reprinting pallet flags can be done at an alternative printer than the original used, a new button in eTouch has been added for this purpose. Subsequent reprints will be using the selected printer.
1387	2020-11-17 11:12:03	Client	20.0.25 - Report selection	PJ		50535
			Fixed an issue in report selection where we sometimes failed to load the clock correctly when loading report settings
1386	2020-11-12 11:53:12	Client	20.0.25 - Prepare code beyond planned	JH		49979
			In eTouch parameters it is now possible to set a second prepare code. This code will automatically be set if the machine is in setup with the default prepare code and the planned setup time has been exceeded.
1385	2020-11-12 09:06:54	Client	20.0.25 - Quick reports in eTouch	PJ		50486
			Quick reports in eTouch now always show the ribbon with possible actions (print, save, close and so forth)
1383	2020-11-12 09:04:30	Etouch	20.0.25 - New special function	PJ		50530
			A new special function has been added, 293 Show cycles + counter2 in eTouch, if this is active we calculate the cykles in the eTouch overview as cycles + counter2.
1384	2020-11-12 08:46:36	Etouch	20.0.25 - Exclusion of cancelled orders, eTouch	JB		50690
			In previous versions of eTouch, extremely long reportnumers prevented cancelled orders to be excluded in the list of planned orders, which is now adjusted.
1382	2020-11-12 08:44:33	Etouch	20.0.25 - Default value for unit_qty	JB		50699
			In previous versions, workorders were allowed to be started with 0 as unit_qty, which resulted in flawed statistics. A defaultvalue of 1 is not applied when that occurrs to avoid this.
1381	2020-11-10 16:08:53	Client	20.0.25 - Balthzar WISE-server	JB		43264
			The Balthzar WISE server now handles duplicate MAC-adresses by ignoring the duplicates, only using one instance (machine) for each MAC-adress.
1380	2020-11-03 11:13:59	Client	20.0.24 - eTouch keyboard	JB		40924
			Previously, the letter W did not change its capitalization when shift was pressed, now it is.
1379	2020-10-30 11:10:39	Client	20.0.24 - Graphical machinehistory, machinegroup	JB		47932
			In earlier versions of Balthzar, the graphical machinehistory could display very scattered small bars instead of longer continuous ones. A reason causing this has been removed, where it was not called for.
1377	2020-10-30 11:07:28	Client	20.0.24 - Counter2 consideration	JB		50304
			When using machines that counts cycles using counter2, some overviews in Balthzar were not considering this when displaying produced quantities. The overview in Client is one place where this has been adjusted.
1378	2020-10-30 07:33:52	Client	20.0.24 - Process parameter and Value on Change	JH		50219
			A new subscription type, Value on Change, has been added in Process parameters. When this subscription type is used a New value and Old value will be used instead of the actual process value. If the value is changed within its subscription time the New value will be set, if not the Old value will be set.
1376	2020-10-30 07:32:03	Client	20.0.24 - CSV-Live value	JH		50172
			A new subscription type, CSV-Live, is added. In short, this will read the value from the latest row in the newest CSV-file matching a file patterin in a folder.
1375	2020-10-27 14:16:15	Client	20.0.24 - Dashboard object	PJ		49981
			Added new setting to dashboard types machine status and own value. The setting is called color when no production, and it changes the background color of the object to specified color when the current shift code is 0 or when the machine is in stop with the production_time flag set to false
1374	2020-10-23 11:31:31	Etouch	20.0.24 - Statistics for short WO-runs	JB		50213
			If an order were run for an extremely short period of time, as is the case when it is started just to do a cancellation, no statistic-record were created earlier. Now it is.
1373	2020-10-23 10:57:57	Client	20.0.24 - Report selection added	PJ		49977
			In the reports OEE - data 2 and OEE - data pivot graph we have added a new selection choise, "A% max 100", if this is selected we cap the A% to 100% for each row.
1370	2020-10-22 11:47:20	Etouch	20.0.24 - New SF 292	JB		50167
			A new (customerspecific) specialfunction has been developed which sets a configured stopreason as a workorder is started based on part category in Monitor, and skips the first piece control. Remaining quantity is reported at WO-end.
1368	2020-10-21 11:00:36	ERP	20.0.24 - Performance and importing materials	JH		50204
			Improved performance when importing materials. This will be extra noticeable when importing many different materials often.
1366	2020-10-19 14:31:07	Client	20.0.24 - Report stopreasonanalysis	PJ		48068
			Added possibilty to group the report stopreason analysis on machine.
1365	2020-10-16 11:39:35	Client	20.0.24 - Report follow up checklist	PJ		50099
			It is now possible to select no part no in the selection. We then skip part when we run the queries.
1364	2020-10-16 10:27:44	Client	20.0.24 - admin daytype schedules	PJ		48619
			Added shift description and daytype description to the grid when administring daytype schedules to increase readability.
1363	2020-10-14	Client	20.0.24 - Extended character limit of mail	JBM		50011
			In the admin report settings section, entered emailadress were earlier limited to 50 characters. Now it is 4000.
1362	2020-10-13	eTouch	20.0.23 - Green card printout, eTouch	jbm		49578
			Earlier, green cards were only available for printing from running orders, now anywhere where a card number can be selected, is a valid
1361	2020-10-13	eTouch	20.0.23 - New SF, preventing datacopy at WO-start	JBM		49136
			A new special function (289) has been developed which allows skipping a otherwise mandatory step at workorderstart, which copies data from the started part to the workorderrow. Using this function prevents dataloss when using the columns part_info1 --> part_info_10 for other logic.
1359	2020-10-12 09:20:19	Scheduler	20.0.23 - Time zones and scheduling of reports	JH		45905
			Adjusted issue where sometimes a difference in time zones between user and server would result in wrong scheduled time.
1358	2020-10-12 08:51:49	Client	20.0.23 - Dashboard cloning	PJ		48719
			Fixed so that all fields are updated when cloning dashboards, previosuly everything was not cloned.
1357	2020-10-12 08:48:09	Client	20.0.23 - report machine hours	PJ		48841
			Fixed a speedup for the report machine hours 2 so that it should be easier to run.
1355	2020-10-12 08:47:15	Client	20.0.23 - Admin machines	PJ		49725
			Fixed issue with saving mac-address for machines in admin
1360	2020-10-12	eTouch	20.0.23 - Adjustments to SF88	jbm		49974
			Pressing the flag while using the SF88 (Dashboard in eTouch), now forces a reload of planned orders, making newly added orders appear.
1353	2020-10-09 08:52:10	Client	20.0.23 - Nice label and pallet flag information	JH		49901
			It is now possible to dynamically add fileds from a pallet flag and its links to a nice label print.
1352	2020-10-08 16:01:10	Client	20.0.23 - Internal Activity report	JH		49898
			Adjusted issue where internal activity report failed to generate for certain work order numbers.
1351	2020-10-07 14:48:06	Status	20.0.23 - Scheduled export to CSV	JH	PowerBI	49850
			It is now possible to set at which hour of the day a scheduled CSV export shoud occurr. This export will happen once each day at the given hour.
1350	2020-10-06 16:04:27	Collector	20.0.23 - Collector and central machines	JH		47988
			It is now possible to manage machines in Balthzar Collector using the balthzar admin instead of the built-in admin in Balthzar Collector. Further, it is also possible to upload existing machines from the collector.
1349	2020-10-06 15:16:29	Client	20.0.23 - Added code and layout mapping	JH		49731
			It is now possible to map a specific code to a specific layout when printing nice label.
1348	2020-10-05 07:55:31	Client	20.0.23 - Dates with timedifference from server	JB		#49757
			A few previously unnoticed spots in Balthzar where dates were not handled correctly due to timedifferences from the server used, has been corrected.
1347	2020-10-02 13:24:03	Client	20.0.23 - Recreate calendar	JB		#48532
			The bug preventing re-creating calendars have been adressed, and should now be working as expected.
1345	2020-09-30 09:29:41	Status	20.0.23 - Historic data	JH		49278
			Added function to set how many days the historic data should be recalculated for on sundays. Default is 14.
1344	2020-09-30 09:28:05	Client	20.0.23 - Shift break	JH		49214
			When creating a day type in the calendar it is possible to set New Shift as shift code. This forces a shift break in the system.
1343	2020-09-29 11:15:51	Client	20.0.23 - Stopplist from client	JH		49131
			The stop list opened from the default quick reports for stop reasons and stop reasons group will now exclude shift 0 - No production time.
1342	2020-09-25 15:54:18	Etouch	20.0.23 - Addition to SF47	JB		48893
			Previously when ending multiple orders simultaneously it has not been possible to create cancellation-records for all ended orders. Now it is.
1341	2020-09-25 12:50:40	Client	20.0.23 - Adjustment in UN-Test	JH	UN-Test	49473
			Will now search for part types with "UN " instead of "UN".
1340	2020-09-24 14:13:12	Status	20.0.23 - LastKnownP	JH		48519
			A new value, LastKnownP, has been introduced in the overview. This is the ratio between LastKnownCycleTime and the planned cycle time. Thus, giving a more "real-time" P-%.
1339	2020-09-24 14:12:01	Status	20.0.23 - LastKnownCycleTime	JH		48519
			LastKnownCycleTime will never exceed two times the planned cycle time to avoid spikes in value.
1338	2020-09-22 08:03:13	Client	20.0.21 - Report selection speedup	PJ
			Fixed so that the following reports should go faster to select in the report list. OEE - Data 2 Machine hours 2 Stop report 2 Time dist. stop reason per department 2 - list Time distribution stop reason pivot/graph
1337	2020-09-22 08:01:45	Client	20.0.21 - Report selection	PJ
			Fixed an issue where multi select components did not clear correctly when loading a report setting.
1336	2020-09-21 16:59:55	Client	20.0.22 - Insert location quantity	JH		49024
			When creating empty tool inserts, insert location quantity will be used instead of inserts to determine how many should be created.
1335	2020-09-21 15:56:38	Etouch	20.0.22 - SF287 Inherit manfactor	JB		#49171
			Special function 287 now has its functionality implemented in the webservice, which means that as long as an order is started from v20.0.22 and forward, its logic will be run regardless of how/where the order is started. This is particularily useful when funcitons for autoamtic workorderstart is used.
1333	2020-09-21 08:39:52	Etouch	20.0.22 - Extension to SF174	JB		48183
			Special function 174 has been extended to additionally warn if a planned order is missing an associated tool, along with the same warningicon on running orders which were started without a tool.
1330	2020-09-18	Client	20.0.22 - Week numbers in Balthzar	PL		49290
			Balthzar has a separate table that holds week numbers for selections. This table has been extended to support full functionality until 2025.
1329	2020-09-17 13:18:46	Client	20.0.22 - Quick report and search tool	JH	CAP	49071
			When using production settings as a quick report it is possible to create it for another tool then what is currently running. This is done by searching for the tool.
1328	2020-09-17 10:45:02	Client	20.0.22 - Adjustment in stopreasons, Admin	JB		49212
			Version 20.0.21 of Balthzar erased the data entered in stopreasons for Admin if the MachineID option was unselected, this has been adjusted.
1327	2020-09-09 14:34:29	Status	20.0.21 - SF283 Automatic start/stop order	JH		48252
			SF283 has been adjusted to start the "next" order instead of the first order. The next order is the order after the stopped one.
1325	2020-09-09 07:43:26	Client	20.0.21 - Escalation of stop	JH		48437
			It is possible to set up 3 different escalation levels when the machine stop. On each level a different message group can be notified. Each level is defined by the time between stop and the group being notified.
1326	2020-09-09 07:43:26	Client	20.0.21 - De escalation of stop	JH		48554
			When a machine start and a message group has been notified of the stop due to escalation, it is possible to notify the groups that the machine is running again.
1324	2020-09-07 08:43:41	Client	20.0.21 - Stopreason available for machine	JB		#48628
			A dropdown menu has been added in Admin for stopreasons, called Available machines. This dropdown includes/excludes selected machines as available for selection in Machinespecific stopreasons and Stopreasons per machine
1323	2020-09-07 08:43:41	Client	20.0.21 - Starting multiple orders	PJ
			Fixed an issue where we somtimes falied to start up multiple orders in SF255.
1322	2020-09-04 11:32:25	Client	20.0.21 - Code stops from GMH, Client	JB		48213
			It is now possible to code stops from the Graphical machine history, machinegroup
1321	2020-09-03 10:33:44	Client	20.0.21 - Permission and tools	JH		48167
			The following permissions may now be used: -Tool - Read -Tool - Write -Tool Inserts - Read -Tool Inserts - Write -Saved Points - Read -Saved Points - Write
1320	2020-09-03 10:31:33	Client	20.0.21 - Tools from menu in Client	JH		48167
			It is now possible to show a tool menu in Client. This is activated on a user basis.
1319	2020-09-03 08:59:53	Client	20.0.21 - Shift hand over report	PJ		48434
			There is now a report called shift handover report that puts all shift handover data in an excel file. This report is possible to get mailed to a specific mail or a message group when the report is signed.
1318	2020-09-02 10:41:57	Etouch	20.0.21 - Inherited manfactor, eTouch, SF287	JB		48368
			A new specialfunction has been developed which automatically sets manfactor for runtime and setup on started order, based on previous one.
1317	2020-09-02 10:38:31	Etouch	20.0.21 - Workorderstart at line	JB		#47579
			A new special function (SF286) has been developed synchronizes started and ended orders for all machines which belong to the same line.
1316	2020-09-01 10:29:36	Etouch	20.0.21 - OEE analysis in eTouch	JB		#48680
			Previously there was a bug prohibiting machinenames with the dash-character to use the OEE-analysis function in eTouch. This has been corrected as of this version.
1314	2020-08-24 08:46:29	Client	20.0.20 - report oee data 2	PJ		47792
			It is now possible to group report oee data 2 on department,zon, ... and break down on shift.
1313	2020-08-24 07:59:46	Client	20.0.20 -Adjusting runtime to stoptime	PJ		48199
			When you adjust runtime to stoptime we now also set cycles and counter2 to zero.
1315	2020-08-20	Etouch	20.0.20 - Recent orders, eTouch	JB		47908
			Previously, recent orders did not display produced reported quantity correctly when alternative unit recalculation factor was used, in combination with alternative counter. This is now corrected.
1312	2020-08-20	eTouch	20.0.20 - Recent orders, eTouch	JB		47906
			The Recent orders form in eTouch now has more columns available.
1311	2020-08-17	eTouch	20.0.20 - Adjustment in Recent Orders - eTouch	JB		47938
			The Recent order - function in eTouch now takes alternative unit recalc factor into account when displaying good qty as well as planned and scrapped.
1309	2020-08-10 15:33:45	Client	20.0.19 - Performance monitor and database	JH		47646
			It is now possible to monitor the load on the database from Administration -> Other -> Performance Monitor.
1308	2020-08-07	eTouch	20.0.19 - More responsive eTouch after reporting	JB		47563
			An issue in eTouch resulting in good quantity showing old good quantity for a few seconds after reporting scrap/good quantity, has been adjusted.
1301	2020-08-06 10:22:18	Client	20.0.19 - Online documentation	JH		47589
			The documentation for Balthzar is now available online at http://download.balthzar.se/help/ENG/ and http://download.balthzar.se/help/SWE/
1307	2020-08-06	eTouch	20.0.19 - Changes to calculated statistics	JB		42648
			The function which summarizes workorderruns by card_no, now has a averaged, weighted, man_factor_run added along with planned_cycle_time. (Affects records created in object_card_history.)
1300	2020-08-04 11:52:13	ERP	20.0.19 - Report manual transactions to ERP	JH		47318
			Added function to toggle if manual transactions should be reported to ERP-system when reporting time or only on timer.
1299	2020-08-04 11:11:15	Client	20.0.19 - Time distribution department - graph	JH		47353
			The time distribution department - graph report will no longer lock infront of the client and thus it is now possible to continue working with the client whilst viewing the report.
1297	2020-08-04 11:10:15	Client	20.0.19 - Improved loading of work order details	JH		47377
			Decreased loading time for viewing work order details.
1296	2020-07-10 09:23:37	Client	20.0.19 - Reports and performance loss	PJ		45658
			The following reports now handles performance loss when calculating OEE. 24-hour analysis pivot/graph History work order pivot graph Productionreport machine Productionreport machine statistics Productionreport work order Production follow up excel OEE - Data pivot/graph Availability pivot/graph
1295	2020-07-07 11:43:41	Client	20.0.19 - Improvments	PJ		47067
			Fixed an issue that prevented us from saving new imporvments. Fixed so that planned and finished comment in the grid now shows on multiple lines.
1294	2020-07-07 08:47:00	Client	20.0.19 - Production report detailed	PJ		46193
			Added possibility to get the report Production report detailed in a custom pdf. This is set with a new selection criteria "Excel template", if this is set to none we show the report as a pdf as usual.
1293	2020-07-07 08:40:21	Client	20.0.19 - Report and message groups	PJ		45603
			It is now possible to schedule reports to be sent to a message group, and not just a single email. The report will be sent to all email recipients in the group.
1292	2020-07-03 07:30:08	Client	20.0.19 - New internal activity warning	JH		46954
			The new activity warning in standalone internal activity will now be displayed in bottom left of the screen.
1290	2020-07-02 14:07:09	Etouch	20.0.19 - Printout warnings, eTouch	JB		45800
			If attempting to print a non-allowed filetype from eTouch, the program now tells the user that it cant, as opposed to the previous silence.
1291	2020-07-02 13:59:16	Client	20.0.19 - SF283 Automatic start of order	JH		46032
			A new special function which stops the current running order if the planned amount is reached. If the order is stopped in this way, the next order in the run plan will be started. This function may be toggled from within eTouch without turning the special function of.
1289	2020-07-02 13:44:51	Client	20.0.19 - Performance monitor in admin	JH		46953
			In administration -> Other -> Performance monitor it is now possible to monitor how the webservice communicates with the database.
1288	2020-06-30 15:44:56	Client	20.0.19 - Active user	JB		46827
			A new field has been added in Admin for Users, Active user, which marks a user as either active or not. Default is active. This setting currently only affects SF281, however might have extended functionality onwards.
1287	2020-06-26 16:29:00	Client	20.0.19 - Specific stopreason for machines	JB		46185
			A new (optional) layer of configurability has been added in regards of which stopreasons will be available at which machine. This is done by a newly added column in Admin for stopreasons, where zero or more machines can be made available to specific stopreason. This is a complementary, functionality to previous ones, and wont override previous configurations
1286	2020-06-23 10:56:05	Client	20.0.18 - SF281 adjusted for multiple signin/out	JB		45898
			SF281 now enables simultaneous sign-in/offs of multiple employees.
1285	2020-06-22 15:54:45	Etouch	20.0.18 - SF175 adjustments, better errormessage	JB		46018
			When using SF175 to enter manningfactor for running orders in eTouch, failed workorder-restarts where not warned of. A new messagebox is displayed when this occurrs as of v20.0.18
1284	2020-06-18 08:19:17	Client	20.0.18 - Increased usage of machine status buffer	JH		45964
			More calls to machine status uses buffer. This will decrease the SQL-server load.
1283	2020-06-18 08:17:55	Client	20.0.18 - Company data is buffered	JH		45969
			Company settings are now buffered. This will decrease the SQL-server load.
1282	2020-06-17 09:10:45	Status	20.0.18 - Calculation of last known cycle time	JH		45681
			The last known cycle time for each machine will now be available
1281	2020-06-17 07:16:47	ERP	20.0.18 - ERP transfer and interval	JH		45718
			ERP transfer interval will now persist through reboots. In short, this will give a more consistent reporting.
1280	2020-06-17 07:14:11	Client	20.0.18 - Remove unnecessary files	JH		45908
			Balthzar Client and eTouch will now remove old and unused files.
1279	2020-06-11 13:43:33	ERP	20.0.18 - Increased compression ERP transfers	JH		45717
			Further increased compression when sending time and quantity to SAP using RFC interface.
1277	2020-06-10 14:33:17	Client	20.0.17 - report improvments	PJ		45858
			Improved the performance of the following reports: Oee - Data 2 Production report detailed Production report 2 Oee - basis for excel 2 Oee - Data pivot graph Production report different units
1276	2020-06-10 08:30:57	Client	20.0.17 - Report and speed loss	PJ		45343
			In the reports production report detailed and oee data 2 we now have the possibility to handle stops as speed loss. If a stop reason have the speed loss setting active the stop will not affect availability as previously but will instead affect the performance in the oee data.
1275	2020-06-10 08:25:41	Client	20.0.17 - Manual reports in client	PJ		45396
			It is now possible to report good quantity and scrap from the manual report window in client.
1274	2020-06-10 08:24:16	Client	20.0.17 - Work order details	PJ		43437
			Updated the graphics in the work order details and added fields containing manning information.
1273	2020-06-09 11:20:16	Client	20.0.17 - Internal Activity and UN-Test Condition	JH	UN-Test	44251
			The UN-Test condition check will now be performed when activity is started manually as well.
1272	2020-06-09 09:05:06	Client	20.0.17 - Additional information in Parts2	JB		45513
			The form Parts2 in Balthzar Client has been extended with part_info1-->10 from the workorder record. (These columns contain company-specific data.)
1271	2020-06-08 10:29:51	Etouch	20.0.17 - Machinestatus-update	JB		44971
			In some cases, eTouch fails to update the middle warning-sign in the lower left corner correctly. One of these cases have been identified and adjusted.
1270	2020-06-04 11:41:32	Client	20.0.17 - Adjusted machine status buffer	JH		45479
			Increased performance in machine status buffer.
1269	2020-06-04 11:36:13	Status	20.0.17 - Increased performance on statistics	JH		45475
			Adjusted frequency of different statistics intervals. I.e., P% for one hour is calculated each 5th minute whilst P% for thirty days are calculated each 4th hour.
1266	2020-05-29 13:00:27	Etouch	20.0.16 Adjustments to SF278	JB		#45386
			As of v20.0.16, the keyboard used when entering traceIDs are more userfriendly, and informative.
1267	2020-05-29	Etouch	20.0.16 Suggest palletflag copies	JB		45131
			A new, Monitor only special function (216) has been developed which makes it possible to suggest a number of copies per part, when printing palletflags.
1264	2020-05-26 13:33:36	Etouch	20.0.15 - Special function 279: Empty pallet	JH		45130
			If this special function is activated no pallet flag will be printed by balthzar. It will be registered as a printed pallet flag. This special function is used when pallet flags are printed else where.
1263	2020-05-20 14:55:37	Client	20.0.15 - Dashboard object PDF-viewer	PJ		#45080
			A new dashboard object has been added called PDF-viewer. This can show a PDF, either by getting the file location through sql or by setting a static location when creating the object
1262	2020-05-20 14:54:17	Client	20.0.15 - Improvements	PJ
			Added conditional formating options to the grid in the improvements form.
1260	2020-05-20 08:32:01	Client	20.0.15 - Stop reason interval in process values	JH		44759
			Increased function to automatically code stops using process value. It is now possible to code a stop when a process value is between two limits.
1261	2020-05-20 08:32:01	Client	20.0.15 - Stop reason in process value and prefix	JH		44759
			Increased function in automatic coding of stops using process values to add a constant prefix before the provided stop code.
1259	2020-05-20	ERP	20.0.15 - Threshold of reportingdifference	JBM
			As of 2020-05-20 Balthzar_ERP has a function which makes it possible to ignore warningmails fr�n Balthzar_ERP which warns about reportingdifferences below a threshold-value. This is useful when reporting in alternative units, and the alternative unit calculation results in a decimal number which gives rise to the difference.
1256	2020-05-15 09:57:26	Etouch	20.0.15 - Retries of palletflag printouts	JB		44803
			In earlier versions of eTouch, certain customers have experienced failed palletflag printouts in combination with their used special functions. As of v20.0.15, 3 automatic retries are performed if one or more fails, and the operator is informed of the failures in a more clear manner.
1257	2020-05-15 09:08:59	Client	20.0.15 - Finished orders	PJ
			Decreased the time it takes to find finished orders in client -> overview -> finished orders.
1249	2020-05-12 16:56:54	Client	20.0.14 - Dashboard shared data	PJ
			The dashboard now downloads the overview data and it is possible to fetch this data instead of having sql queries for each object.
1248	2020-05-12 16:56:08	Client	20.0.14 - Production report detailed	PJ
			Fixed some issues in the report production report detailed
1255	2020-05-12 14:14:59	Etouch	20.0.14 - Processvalue as default value in I.A	JH		44691
			When using process value as default value in internal activity checklist the value will now be the live value instead.
1251	2020-05-11 14:12:52	Client	20.0.14 - Internal activity and pallet flag	JH		44236
			It is now possible to store entered values to checklists on a pallet flag.
1247	2020-05-07 11:53:31	Client	20.0.14 - Internal activity selection	JH		44418
			Added buffering off internal activity selection. This should reduce load of database on copmanies using internal activity.
1246	2020-05-07 11:51:14	ERP	20.0.14 - Report to ERP-system and machines	JH		44696
			Adjusted issue where Balthzar would search for data to send to ERP-system even if the machine was set to not send data. No data was ever sent, but the check was still performed. This is only a performance issue.
1229	2020-04-30	eTouch	20.0.14 - IA blocking palletflag	JB		44234
			As version 20.0.14 internal activities can now be configured to prevent printouts of palletflags
1227	2020-04-29	Client	20.0.13 - Date codes in Admin	pw
			It is now possible to administrate date codes in the recipe module by editing year and month on the different codes. This function is reachable from production settings in Admin.
1228	2020-04-29	Client	20.0.14 - Yes/No in Internal Activities Checklist	JH		44148
			Yes/No with/without deviation is renamed to Yes/No with/without text. Further, a No will always result in a deviation on the activity.
1226	2020-04-21	eTouch	20.0.13 - Output from I.A row	JH		43933
			When performing an internal activity with another internal activity as output from row, the new activity will use the same machine as the previous activity regardless on which machine the activity is performed on.
1225	2020-04-16	eTouch	20.0.13 - Printout of palletflags	JB
			In the rare situations where pallflag printouts from eTouch fails, this was not very obvious and the palletflag counter was erroneously incremented. A more explanatory message is now presented, and the addition of the palletflagcounter is not performed if errors occur.
1224	2020-04-09	eTouch	20.0.13 - Orders and tools from monitor	JH
			When using Monitor to get orders balthzar will use the tool planned on that order on row 1.
1221	2020-04-03	eTouch	20.0.13 - Historical orders, eTouch	JB		43694
			Finished workorders was not taking alternative_recalc_factor into account when presenting the produced quantity earlier, this is now adjusted.
1220	2020-03-31	Client	20.0.12 - Internal activity as output on checklist	JH	UN-Test	43178
			It is now possible to specify an activity that should be created if a checklist row has yes or no as answear. Further, it is also possible to specify the amount of copies of that activity that should be created.
1217	2020-03-31	web	20.0.12 - Shift Handover user type	PJ		43343
			You now need to be of user type 9 to save layouts in the shift handover report. You now need to be of user type 7 or above to be able to comment and sign shift handover reports.
1218	2020-03-31	Client	20.0.12 - Allow user input in checklist	JH	UN-Test	43114
			It is now possible to toggle whether a user may enter input to a checklist row or not. If not, the checklist row must get its value from Another source.
1219	2020-03-31	Client	20.0.12 - Frequency offset in checklists	JH	UN-Test	43177
			It is now possible to set in which offset in the frequency the checklist row should appear in. Before it was only possible to make checklist rows appears on even multiples of the frequency. It is now possible to offset that.
1216	2020-03-31	Client	20.0.12 - Shift Handover	PJ
			We can now correctly save number of decimals to show in the report shift handover grid.
1214	2020-03-30	Client	20.0.12 - Internal activity and list input	JH	UN-Test
			Improved input options when using a list in internal activity checklist. Instead of using a dropdown list in the selected cell, it is now possible to select from the list using a keypad.
1215	2020-03-30	web	20.0.12 - Machinenote Client	JB		43093
			A bug which prevented correct editing of machine-notes in Client has been corrected. Previously a aborted attempt to edit the machine-notes resulted in a non-responsive user interface, which now has been adjusted.
1213	2020-03-26	eTouch	20.0.12 - Clear startfile password, eTouch	JB		41989
			You can now set a password which is required in order to clear the startfile in eTouch. This is entered in the companysettings. (Just take care when entering it, it is not obscured by * as normal passwords are ...)
1212	2020-03-19	eTouch	20.0.12 - Firstpiece control - eTouch	JB		42696
			If, for any reason, firstpiececontrol in eTouch fails, now the user gets a chance to retry it, in order to avoid being stuck in permanent setup-state. (Previously you could retry, however it was not apparent that you needed to do it.)
1211	2020-03-18	Client	20.0.12 - Internal activity standalone	JH		42983
			Adjusted issue where Internal Activity standalone would sometimes show an activity after it was closed.
1210	2020-03-18	Client	20.0.12 - Recept control	JH		36387
			A new module which monitors the recipe from a process value and compares it to current/planned orders. It will create warnings if the recipe is wrong.
1207	2020-03-12	Client	20.0.11 - Force comment at unreasonable value	JH		36387
			In internal activity checklist it is possible to force a value to a row if any other row has a value outside the reasonable limit.
1208	2020-03-12	Client	20.0.11 - Allow value outside reasonable limit	JH		36387
			In internal activity checklist it is now possible to allow a value that is outside the reasonable limit. The row will still be red and considered a deviation.
1209	2020-03-12	Client	20.0.11 - Lock if outside reasonable limit	JH		36387
			In internal activity checklist it is now possible to lock a row if the entered value is outside the reasonable limit. This must be used together with the Allow outside reasonable limit function.
1206	2020-03-10	Scheduler	20.0.11 - Invalid tool position	JH		39671
			If special function 274 is Active on a machine balthzar will check for invalid tool/order combinations once an hour. If such a combination is found, a message Group in balthzar will be notified.
1204	2020-03-09	Client	20.0.10 - Shift handover	PJ		41359
			It is now possible to automatically generate a shift report. Once the report is generated it can be signed and commented on for 1.5h. The generated report covers specified cathegorys/department/zone and generates one row per machine in the selection.
1205	2020-03-09	eTouch	20.0.10 - Change manning moved	JB		42650
			The location of the icon for changing the manning of machines (SF175) has been changed from the Other-submenu to the main one, in eTouch
1201	2020-03-05	Client	20.0.10 - List as input type to Checklist	JH	UN-Test	41715
			It is now possible to use a List as input to Internal Activity Checklist
1200	2020-03-05	Client	20.0.10 - List from SQL	JH	UN-Test	41715
			It is now possible to create a list which is a combination of custom rows and SQL-queries.
1202	2020-03-05	Client	20.0.10 - Data from SQL as input	JH	UN-Test	41715
			It is now possible to use input type Data from SQL in internal activity checklist. When the activity is opened, the selected SQL will be executed and the result will be set as the entered value of the row.
1203	2020-03-05	Client	20.0.10 - Data from SQL from Dropbox	JH	UN-Test	41715
			It is now possible to use Data from SQL from Dropbox as input in internal activity checklist. If this input type is used, the provided SQL Query will be executed when a row with input type List Changes value. The result from the Query will be used as entered value of the row.
1199	2020-03-04	eTouch	20.0.10 - Quickselections, eTouch	JB		42490
			Two new specialfunctions (272 and 273) have been developed which eliminates the step of pressing Save when coding stops via the Stopreasongroup and Stopreason form in eTouch, this is now done automatically.
1194	2020-03-03	eTouch	20.0.10 - Warn for activity	JH	UN-Test	41711
			It is now possible to display new/open activities on a machine without being able to perform them on that machine.
1195	2020-03-03	web	20.0.10 - UN-Byte	JH	UN-Test	41731
			Added new condition called 5060-UNbyte to internal activities. This is a customer specific function.
1196	2020-03-03	eTouch	20.0.10 - Adjustments to batchselection by scanner	JB		42478
			SF 263, Batchselection by scanner, has been adjusted so that a referencescan followed by a comparative scan is needed before quantities can be scanned. The reference-scan of warehouselocation must match the comparative, second scan, in order to be accepted. The sequence of these scans are fixed, and cannot be changed at this point.
1197	2020-03-03	eTouch	20.0.10 - New alternative startpage, eTouch	JB		42565
			A new specialfunction (270) has been developed, which enables an alternative standardpage to be used, instead of the Workorder page.
1198	2020-03-03	eTouch	20.0.10 - Alternative counter = alternative unit	JB		42525
			A new specialfunction (271) has been developed which makes an alternative calculation for the alternative_unit_recalc_factor-field in eTouch, based on which counter is used to register produced quantity.
1192	2020-03-02	Scheduler	20.0.10 - Checklist and frequency	JH	UN-Test	41727
			It is now possible to determine how often a certain row in a checklist should appear by setting a frequency. If the frequency is 1, this checklist row will be available everytime the activity is created. If the frequency is 2, the row will be available each other time and so forth. Attn. Other conditions will still apply.
1193	2020-03-02	Client	20.0.10 - Copies of activities on output	JH	UN-Test	41712
			When an activity is used as output of Another activity you may enter the amount of copies that should be created.
1191	2020-03-02	Client	20.0.10 - Create activity later	JH	UN-Test	41736
			In administration for internal activities it is now possible to enter if the activity should be created for future use. This means that the activity will be created now, but may not be performed until a later time.
1190	2020-02-27	eTouch	20.0.10 - Adjustments to SF255	JB		42421
			The specialfunction 255 has been adjusted so that a barcode icon is displayed in eTouch to manually display the workorderstart form, along with its previous functionality.
1189	2020-02-24	eTouch	20.0.10 - Adjustments to SF142	JB		41807
			Specialfunction142 (Prevent WO start if not previous operation was started) has now been adjusted to support usage of the Balthzar DB, in addition to earlier when only Monitor was supported as ERP system.
1188	2020-02-18	eTouch	20.0.9 - Manual machine, visible orders	JB		40802
			Manual machines previously couldnt display the last two planned orders in the list of planned orders, when pressing the down-button. This has now been fixed.
1187	2020-02-17	eTouch	20.0.9 - Additional info on planned orders, eTouch	JB		40589
			A new special function has been developed which makes it possible to show the field Additional name as the third row for all planned orders in eTouch. Monitor only. (Update Part - Inventory in Monitor)
1186	2020-02-12	eTouch	20.0.8 - New SF 266, Workorderstart on the go	JB		41284
			A new specialfunction has been developed which makes switching orders in eTouch while the machine is running smoother, given that the same part is started as the one previously running. For further information, see the documentation.
1185	2020-02-10	eTouch	20.0.8 - Block first piece with internal activity	JH	GD19	40912
			It is now possible to prevent first piece Control whilst certain activity is open.
1183	2020-02-07	Client	20.0.8 - Dashboard object machine status	PJ		40849
			The dashboar object machine status can now show a machine priority image. Size and location of this can be set in the objects settings as well as if it should be shown.
1184	2020-02-07	Client	20.0.8 - Dashboard object machine status	PJ		40850
			The dashboard object can now warn if the machine have stood still with the stop reason No stop reason for too long. How long it should wait before warning and what color it should warn in can be set in the object settings.
1182	2020-02-06	Client	20.0.8 - Order bound internal activity	JH	GD19	40911
			An internal activity can now be bound to an order. When the activity is created it is bound to the order, if any, currently running in the machine. If the order is stopped Before the activity is performed, the activity will be cancelled.
1181	2020-02-06	Client	20.0.8 - New checkbox in Admin Machines	pw	Development	41311
			Added checkbox which enables the possibility to change report quantity alternate unit in Admin Machines.
1180	2020-02-03	eTouch	20.0.8 - Manual sorting of production settings	JH	GD19	40926
			When accessing production settings from eTouch, it is no longer possible to manually sort the data in the grid. It will Always use the default sorting.
1179	2020-01-30	eTouch	20.0.8 - Machinebound scrapreasons, materials	JB		41115
			As of this version, the machinebound scrapreasons used in special function 254, will now also be available when registering scrap for materials, overriding the settings previously used for scrapreason category.
1178	2020-01-28	eTouch	20.0.7 - New SF 264, Avoid small material balances	JB		40909
			If a materialwithdrawal is made in eTouch which differs less than 0.1 in the standard unit, the quantity is adjusted to be everything instead. This eliminates insignificant balances of materials when using alternative units.
1176	2020-01-27	Client	20.0.7 - Production settings and parts	JH	GD19	41051
			Part settings for the five next planned orders are now available in the production settings report.
1177	2020-01-27	Collector	20.0.7 - Plant Unit Control	JH		41028
			When using the Plant Unit Control function in Balthzar Collector a machine not sending data will be considered as not running.
1171	2020-01-27	eTouch	20.0.7 - Adjustments to SF255	JB		39639
			Since specialfunction 255 in many cases suffeers from performance issues, it has been re-worked to use a intermediary form where scanned orders are temporarily stored while awaiting to be started. Each order which has a status diffirent from OK are tried to be started, and updated with its current status once its done. For further information, see the documentation
1173	2020-01-27	eTouch	20.0.7-Batchnumber in materialwithdrawal, Monitor	JB		39637
			When reporting materialwithdrawal in eTouch, those customers who are running Monitor now gets the affected batch used registered on the Balthzar-record.
1175	2020-01-27	eTouch	20.0.7 - Adjustments to SF263	JB		40908
			Specialfunction 263 Batchselection by scanner has been adjusted so that bad scans are notified by a message-box when encountered.
1170	2020-01-27	Client	20.0.6 - Signature in production settigns report	JH	GD19	40743
			The signature of the employee who performed the latest change on a production setting is now available in the production settings report.
1174	2020-01-27	eTouch	20.0.7 - New specialfunction 263	JB		40870
			A new specialfunction (263) has been developed which makes it possible to enter values in the materialwithdrawalform of eTouch, using a scanner.
1168	2020-01-21	eTouch	20.0.6 - New SF (262), material scrap correction	JB
			A new specialfunction has been developed, Adjust materialwithdrawal scrap at workorder finish, which re-stocks selected materials at workorder finish, based on scrap registered. See documentation for further information.
1172	2020-01-21	eTouch	20.0.6 - New SF (262), material scrap correction	JB
			A new specialfunction has been developed, Adjust materialwithdrawal scrap at workorder finish, which re-stocks selected materials at workorder finish, based on scrap registered. See documentation for further information.
1167	2020-01-20	Client	20.0.6 - Header columns in admin	pw
			Fixed header columns in admin that always is shown when scrolling in the table.
1165	2020-01-13	eTouch	20.0.5 - New SF (257) block first piece	JH
			If values in some production settings in an input group are missing the first piece cannot be approved.
1166	2020-01-13	eTouch	20.0.5 - New SF (258) remind production setting	JH
			If no production settings in a certain input group has been changed within X-% of the order time, a reminder is displayed when the order is finished.
1162	2020-01-10	Client	20.0.5 - Arithmetic and process values	JH
			A new process value type, Arithmetic, has been added. Using this type it is now possible to set up a process value as the sum, difference, product or quotient of two other process values.
1164	2020-01-10	eTouch	20.0.5 - Temporary language, eTouch	JB
			eTouch has received a new function where you can temporarily change the language used, by selecting an alternative language in the Other menu. All systemavailable languages can be selected, however it is up to the customer using languages other than swedish and english, to make sure the companyspecific translation are in place for accurate usage. (After a language change, eTouch reverts to its standard language when restarting the application.)
1160	2020-01-09	eTouch	20.0.5 - New SF (248) start parallell part	JB
			A new special function (248) has been developed which allows a related part to be automatically started in the same machine, when starting a primary part, in eTouch. See documentation for further information.
1161	2020-01-09	Client	20.0.5 - Admin: Edit all scheduled report settings	pw
			Added a new form for editing all existing reports.
1157	2019-12-20	Client	20.0.5 - Cavity reduction	PJ
			Fixed an issue that prevented the cavity reduction form to open.
1158	2019-12-20	Client	20.0.5 - Searchable dropdowns default value Admin	pw
			Now the searchable drop down menus have a default value in Administration.
1159	2019-12-20	Client	20.0.5 - Stop reason	PJ
			Fixed an issue that sometimes prevented us from updating stop reasons in client.
1156	2019-12-19	Client	20.0.5 - New tabs in Admin-->Production settings	pw
			Two new tabs where you can lock properties to tools in Admin-->Production settings-->Tool.
1155	2019-12-16	eTouch	20.0.4 - Adjustments to SF174	JB
			Specialfunction 174 has been updated to prevent first piece approval when used tool has orange status (Under calibration). Workorders can still be started, but when doing so, repeated warnings will appear, dissuading further production.
1154	2019-12-13	eTouch	20.0.4 - Running orders, griddesign eTouch	JB
			In earlier versions of eTouch, the gridcontrol displaying running orders in the Running orders-form were not saving its settings correctly. This has been adjusted. (The green + icon in the workorder form).
1150	2019-12-12	eTouch	20.0.4 - Machinesetting in eTouch (SF256)	JB
			A new specialfunction has been developed which enables displying a userconfigured machinesetting value in eTouch, instead of the standard [O]EE(O)-value
1151	2019-12-12	Client	20.0.4 - New field in Admin-->Tools	pw
			Added new field in tools for "Number of insert locations".
1153	2019-12-12	eTouch	20.0.4 - Special characters, eTouch	JB
			A new functionality making it possible to add special characters in eTouch have been added, see documentation for further information.
1148	2019-12-11	Client	20.0.4 - New language in balthzar: Bosnian	pw
			Added Bosnian as language in balthzar.
1146	2019-12-10	eTouch	20.0.4 - Adjustments to manual machines	JB
			In certain situations where stoptime was activated on manual machines, the following stopcode was not processed correctly. This has now been adjusted.
1147	2019-12-10	Client	20.0.4 - Default value in Client-->Update stopreas	pw
			<All Stop reasons> are now default value in the stop reason dropdown in Client-->Update stop reasons.
1143	2019-12-09	Scheduler	20.0.4 - Scheduled print jobs	JH
			Adjusted issue where reports scheduled to a printer could generate many copies
1144	2019-12-09	eTouch	20.0.4 - Adjustment to SF238	JB
			A situation where the text displayed by special function 238 did not appear as intended has been adjusted.
1145	2019-12-09	Client	20.0.4 - Live data all machines	pj
			Fixed an issue in livedata all machines where we failed to correctly save the machines.
1142	2019-12-03	Client	20.0.4 - Searchable dropdowns in Admin	pw
			Added searchable dropdown menus in Internal activities-->Checklist
1139	2019-12-02	Client	20.0.3 - Box data in cell and warning	JH
			It is now possible to send an email to a message group if any box reported using process value special function 1 is on an order not currently running in the machine.
1140	2019-12-02	Client	20.0.3 - Report stop list 2	PJ
			The report Stop list 2 now has support layout support, i.e. you can create new layouts for how the report should look.
1141	2019-12-02	Client	20.0.3 - Report Production report 2	PJ
			The report Production report 2 now has support layout support, i.e. you can create new layouts for how the report should look.
1138	2019-11-29	eTouch	20.0.3 - Start WO by scan	JB
			A new specialfunction has been developed which makes it possible to start workorder by scanning the card_no of the order to be started.
1134	2019-11-28	Client	20.0.3 - Support info reachability	pw
			It is now possible to reach the website directly in Client for support information by clicking the tab "Help" then "Support". (www.balthzar.se/support)
1136	2019-11-28	Client	20.0.3 - Searchable dropdowns in Admin	pw
			Added searchable dropdown menus in Internal activities-->Activity
1131	2019-11-22	Client	20.0.2 - Dashboard Layers visibility	PJ
			Added the ability to let an sql querry determine if a dashboard layer should be used.
1132	2019-11-22	Client	20.0.2 - 12h statistics calculation	PJ
			Added the possibility to get A, P and Q calculated for the last 12 hours. This is activated in balthzar status.
1129	2019-11-21	eTouch	20.0.2 - SF 252, recalcfactor Materialbundle	JB
			A new special function has been developed which makes it possible to report in alternative materialunits when reporting material withdrawals in eTouch, using SF166 (Materialbundle). This is a Monitor-only special function.
1130	2019-11-21	eTouch	20.0.1 - New SF251 Automatic card counterselection	JB
			A new Monitor only, special function (251) has been developed which makes it possible to automatically determine which IO-port of the machine-box should be used, when starting orders based on the planned workorders part. See documentation for further info.
1128	2019-11-20	eTouch	20.0.2 - Special function 250	JH
			Added new special function 250 which will use Decimal field 1 in monitor parts as Inserts if String 6 in monitor parts starts with <SK.
1122	2019-11-19	eTouch	20.0.1 - Materials in eTouch	JB
			As of this version, eTouch will always prioritize running workorders over planned workorders when displaying materials. This means that if if an order is started on any machine, its materialbalance will be shown on all other machines who are reviewing materials from planned orders.
1123	2019-11-18	eTouch	20.0.1- Material balance	JB
			A new function has been developed which updates available quantity and consumed quantity of goods as planned_materials are synched, for those customers who synchronize planned order materials to the Balthzar database.
1133	2019-11-18	Client	20.0.1 - Delayed print on pallet flag	PJ
			Added possibility to delay print on pallet flags printed with sf249. This is controlled by adding an delay print sql to the report layout.
1115	2019-11-12	Client	16.1.125 - Report OEE data 2	pj
			Added new selction criteria to report OEE data 2. First thing is layout that allows you to edit the apperance of the report. Second new criteria is "min order time" which only fetches data for the currently running order IF the order has been running for at least x hours.
1112	2019-11-11	Client	16.1.125 - Improved lookup for tools	JH
			Improved search function in dropdown box for Tools in production settings.
1113	2019-11-11	Scheduler	16.1.125 - Scheduler and quick report	JH
			Adjusted issue where scheduler would not print a Quick report.
1114	2019-11-11	ERP	16.1.125 - Import from monitor and mapping	JH
			It is now possible to manually map a field in monitor with a field in balthzar when importing orders. E.g., mapping part_info_9 to alternative_unit_recalc_factor means that part_info_9 would be used instead of alternative_unit_recalc_factor if it exists and has a value.
1110	2019-11-11	Scheduler	16.1.125 - Synchronization of production settings	JH
			Adjusted issue where a synchronized production setting could create an empty change log for each synchronization cycle.
1111	2019-11-11	eTouch	16.1.125 - Buffering and eTouch	JH
			Added support to buffer a majority of eTouch calls. This will greatly reduce load on the database if running several eTouch.
1107	2019-11-04	Client	16.1.124 - Input groups and machines	jh
			Added support to use machine specific input Groups.
1109	2019-11-04	eTouch	16.1.124 - Insufficient rights, eTouch docs	JB
			When using eTouch documents, access rights were not used as intended, resulting in access violation errors when trying to print documents directly from eTouch. One of the reasons for this has been removed in this version.
1108	2019-11-04	eTouch	16.1.124 - Manual machine	JB
			When using manual machines, it was earlier possible to start a machine during shift 0 (outside of scheduled workhours), followed by a error message saying that this was not allowed. At this point, the program, errouneously got stuck in runtime-mode for 30 seconds before the normal status was read, and status reverted to Stopped. This situation has now been prevented.
1106	2019-10-31	eTouch	16.1.124 - SF238 adjusted	JB
			Special function 238 (Show ordertexts eTouch) now displays information attached to the running part along with its previous texts from operation and workorder. Clicking these texts refreshes them.
1103	2019-10-28	Client	16.1.123 - Default tool settings in prod. settings	JH
			It is possible to assign "default settings" in production settings Tools. These settings will automatically be applied to all new Tools.
1105	2019-10-28	eTouch	16.1.123 - Restart order	JB
			Previously, under certain conditions, some columns have not been transferred correctly when restarting an order, which now should be adjusted. Restarting of orders occurrs when starting or stopping the N:th order in a batch, where N>1.
1104	2019-10-28	Client	16.1.123 - New report Pallet flag	PJ
			A new report has been added called pallet flag. The report can use up to five different sql queries, and it is possible to alter its layout. This report can be set to be used as pallet flag from eTouch by activating sf249.
1101	2019-10-25	ERP	16.1.123 - Recipe ID	JH
			Recipe ID will now be loaded to running orders when importing orders from monitor.
1102	2019-10-25	eTouch	16.1.123 - Line break and input	JH
			Touch input will now correctly allow line break.
1097	2019-10-17	Client	16.1.122 - Start work order from process value	JH
			Added new function where a process value provides part number of the order that should be running. Balthzar will then stop any order not using that part and start the next order.
1098	2019-10-17	Client	16.1.122 - Process value and internal activity	JH
			Added new function where process value may start an internal activity if the value is between two thresholds.
1099	2019-10-17	Scheduler	16.1.122 - Reprint and nice label	JH
			Adjusted issue where pallet number incorrectly could increase when reprinting a pallet flag using nice label.
1096	2019-10-16	eTouch	16.1.122 - New SF, Allow rep. on planned orders	JB
			In v16.1.122 a new special function (245 Allow reporting on planned workorders) has been introduced which enables reporting on planned workorders as well as printing pallet flags, see documentation for further info.
1094	2019-10-15	Client	16.1.122 - Dashboard Menu	pj
			Fixed an issue that prevented us from changing the background and text color of the dashboard objects from the dashboard menu.
1095	2019-10-14	Client	16.1.122 - Report stop list	pj
			Added a new selection criteria in the report stop list, a multi-select dropdown on parts where you can select one or several parts that you want to show in the report.
1091	2019-10-14	Collector	16.1.122 - Pallet flag and next card number	JH
			Adjusted issue where pallet flag could not access next operation. This only occurred when importing orders from monitor.
1092	2019-10-14	Client	16.1.122 - OPC-Connector and subscriptions	JH
			Adjusted issue where OPC-Connector could start without subscriptions.
1093	2019-10-14	eTouch	16.1.122 - Internal activity column chooser	JH
			Adjusted issue where sometimes internal activity would display a column chooser after finnishing an activity.
1100	2019-10-14	Client	16.1.122 - New field: code reference in admin	pw
			Added the field code reference in stop reasons and shift in admin
1090	2019-10-11	Client	16.1.122 - New dropdown in admin-->alarm codes	pw
			It is now possible to choose message groups for alarm codes.
1088	2019-10-08	Client	16.1.122 - New tab in Process values	pw
			Added a new tab in Process values for Internal activities where you can set upper and lower limit for creating an activity and least time between activities.
1087	2019-10-08	Client	16.1.121 - Green card materials	PJ
			Updated the printed greencard to include several material locations.
1089	2019-10-08	eTouch	16.1.121 - Changed keyboard, start order by parts	JB
			In the form for starting workorders by part in eTouch, every field which contains editable information is now equipped with the click-->show keyboard function, making the previous keyboard button redundant along with the on screen keyboard, so they are now removed.
1079	2019-10-04	eTouch	16.1.121 - Hide small stops in history	JB
			In eTouch, a new standard button has been added which allows hiding stops shorter than 5 minutes. The button is a toggle, meaning its either active or not regardless of what other conditions are used to filter the result, such as 24h, current shift or previous shift.
1080	2019-10-04	Client	16.1.121 - Scheduled reports	PJ
			Fixed an issue where we sometimes sent old scheduled reports instead of a freshly created one.
1081	2019-10-04	eTouch	16.1.121 Correction to historical orders	JB
			Those customers using specialfunction 179 and Historical orders, could find themselves being locked out of the Historical order function, depending on which version they used. This version fixes that.
1083	2019-10-04	eTouch	16.1.121 - Skip searching for part, eTouch	JB
			When using the function Start order by part, entering an exact part-number match in the partnumber field now fetches the partdata in the same way that would be done if the search-function is used.
1085	2019-10-04	Client	16.1.121 - New admin for message groups	pw
			Admin for creating groups where selected users gets the same alarm messages. For each user you can specify whether they want to receive messages via sms and/or e-mail.
1078	2019-10-04	Client	16.1.121 - Graphical history machinegroup	JB
			A new function displaying machinehistory f�r machinegroups have been developed. This new function resides in the leftside menu of Client, and is called GMH Machinegroup, (GMH is short for Graphical Machine History).
1084	2019-10-04	eTouch	16.1.121 - start order by partnumber-scan	JB
			A new special function (246) have been developed which makes it possible to scan a part-number from the Workorder-screen, and then be taken to the form for starting orders by part, using the scanned part.
1086	2019-10-03	ERP	16.1.121 - Dynamics 365 API changes	JH
			Added support to use TLS 1.2 when connecting to the Dynamics 365 API.
1076	2019-10-02	Client	16.1.121 - SQL as process value	JH
			Adjusted issue where 0 sometimes would not register as a change in SQL process value
1077	2019-10-02	Client	16.1.121 - Editing SQL-query in process value	JH
			Adjusted issue where SQL-Query could be linked between different process values.
1075	2019-10-02	Client	16.1.121 - Machine alarm	JH
			Only one machine alarm may be Active on each machine at any given time
1074	2019-10-01	Client	16.1.121 - Increased support for OPC	JH
			Upgraded support for newer versions of OPC-UA and OPC-DA.
1072	2019-09-30	eTouch	16.1.120 - Input production settings	JH
			Quality of Life improvements in input production settings such as same font in dropdown menus and better scrolling.
1073	2019-09-30	Client	16.1.120 - Production report detailed	PJ
			Fixed an issue in calculating the real speed in the report "production report detailed"
1070	2019-09-25	Status	16.1.120 - New Watchdog applications	JB
			As of v16.1.120, Balthzar_watchdog can now watch generic applications, and make them run if not doing so. (New ini-file : balthzar_watchdog_additional_programs_ini.txt needs to be created with full path to added programs.)
1071	2019-09-25	Client	16.1.120 - Admin machine lines	PJ
			Fixed an issue that prevented us from saving new machine lines.
1066	2019-09-20	Client	16.1.119 - Alarm as mail and/or sms	JH
			It is now possible to receive SMS and/or e-mail when a machine alarm occurs.
1067	2019-09-20	eTouch	16.1.119 Materialtraceability, SF244	JB
			A new specialfunction (SF244) have been developed which makes it possible to attach up to 5 different types of traceabilityinformation to a processed workorder.
1069	2019-09-20	Client	16.1.119 - Quick reports	pj
			It is now possible to run the production report detialed as a quick report. We now show a loading-message when a quick report is being generated. It is now possible to save standard layout for the grid when the quick reports form is opened from eTouch
1065	2019-09-20	Scheduler	16.1.119 - SMS and system message	JH
			SMS can now be sent from Balthzar system messages.
1068	2019-09-20	Client	16.1.119 - Run image 1 & 2 in dashboard	pw
			Added checkboxes for Run image 1 and 2 that makes it possible to show them in selected dashboard one at a time. It also works to save them
1064	2019-09-19	Client	16.1.119 - Admin machines	PJ
			Fixed an issue in admin machines that somtimes failed to load setting correctly.
1061	2019-09-17	eTouch	16.1.118 - Increased layout in input groups	JH
			Increased layout handling in input groups from eTouch.
1063	2019-09-17	Client	16.1.118 - New textbox in admin-->etouch	pw
			Added a textbox instead of combobox for Pallet flag printer 2 so that you can enter and save text. Also checked if the problem was gone for the customer and it was.
1062	2019-09-17	eTouch	16.1.118 - Scrolling in PDF viewer	JH
			Increased scroll functionality in Quick report PDF Viewer.
1057	2019-09-16	eTouch	16.1.118 - Buffering of special functions	JH
			Special function on Machines are now buffered in the webservice. This will increase performance and greatly decrease load on database.
1058	2019-09-16	eTouch	16.1.118 - Buffering machine status	JH
			Added support for buffering of machine status. This will greatly decrease database load, especially when using many Machines.
1059	2019-09-16	Client	16.1.118 - Changes to report oee to excel 2	PJ
			Added the possibility on oee to excel 2 to not group on shift.
1060	2019-09-16	Client	16.1.118 - Changes to report sql pivot/graph	PJ
			Added the possibility to not get the report as a pivot/graph, the report then only shows a graph and you will have to manually add series to the graph in the design guide.
1056	2019-09-13	eTouch	16.1.118 - SF44/SF45 changes	JB
			The behaviour of SF44 / SF45 has been changed so that only companies that have explicitly entered Monitor as their used ERP-system in company settings, now get their texts from Monitor, as opposed to previously, where Monitor-queries were executed by default, weighing the webserver down with timeout-queries for customers who did NOT use Monitor as their erp system.
1054	2019-09-12	eTouch	16.1.118 - Adjusted material quantity on scrap	JH
			Fixed issue where scrap quantity and material quantity could differ.
1055	2019-09-12	eTouch	16.1.118 - Removed tooltips	JB
			Lately a major performance bottleneck have been identified in Attention and eTouch displaying Attention-slides showing dynamically created controls. As a temporary fix for this, tooltips have been disabled where they are used, and cause this issue.
1053	2019-09-11	Client	16.1.117 - Adjust materials on scrap	JH
			Added option to perform material reportings on different scrap reasons.
1051	2019-09-10	eTouch	16.1.117 - Lingering firstpiece-page	JB
			Customers using the first piece-function in eTouch have previously reported that this page was lingering too long after the first piece had been approved, as well as taking its time to appear after a started order. This has now been corrected.
1049	2019-09-10	Client	16.1.117 - Production report detailed	pj
			Fixed some issues with the report "Production report detailed"
1050	2019-09-10	eTouch	16.1.117 - SF3 adjusted	JB
			Those customers using specialfunction 3 will now end up in the Productionorder page when switching machines via the Overview page in eTouch, as originally intended.
1052	2019-09-10	Client	16.1.117 - General company settings in admin	pw
			Added a new form in admin-->basic data-->General company settings for table balthzar_ex_multiTable where you can search, delete, edit, update & add company settings
1048	2019-09-09	ERP	16.1.117 - Import of materialtexts in Dynamics	JH
			Improved performance when importing material texts from Dynamics 365
1045	2019-09-06	Client	16.1.117 - Module settings in Admin Process values	pw
			Added Module settings in Admin Process values with fields for Machines, Special function, Parameter name and Parameter values. Also a table with the values.
1047	2019-09-06	Client	16.1.117 - Server settings in company settings+opc	pw
			New fields in Admin-->Company settings and in OPC connector-->Settings for Local- server, login and password. In OPC you can test and update entered values.
1046	2019-09-06	Client	16.1.117 - Stop statistic group in Admin	pw
			Added Stop statistic group in Admin-->Basic data with the fields Code and Description and a table.
1043	2019-09-05	Client	16.1.116 - Bugfix for SQL query in admin	pw
			Added a splitpanel in admin-->basic data-->SQL query for better UX and now chosen rows are focused although the form reloads + fixed the checkbox for text color.
1044	2019-09-02	Client	16.1.116 - Report OEE to Excel	PJ
			Added grouping term in selection so that its now possible to group on stop statistics group or on stop group.
1036	2019-09-02	eTouch	16.1.116 - Altered uservalidation Monitor, eTouch	JB
			If ERP system used is Monitor and the balthzar-database is containing planned orders (connectiontype = 0) then the uservalidation is altered to approve any signature if connection is lost to the Monitor database. This will support continuous operation even during downtime.
1037	2019-09-02	eTouch	16.1.116 - Altered uservalidation Pyramid, eTouch	JB
			If ERP system used is Pyramid and the balthzar-database is containing planned orders (connectiontype = 0) then the uservalidation is altered to verify usersignatures against a locally synchronized table, object_PUPERS_pyramid, reducing the Pyramid-server load. Affected validation is reporting of quantity, scrap and printing of palletflags.
1038	2019-09-02	Client	16.1.116 - Production report detailed	pj
			Fixed some issues with the report Production report detailed.
1040	2019-09-02	Client	16.1.116 - Tools in parts	pw
			Added a dropdown in parts with tools where you can choose already existing tools or enter a new one.
1035	2019-09-02	Client	16.1.116 - Report time span selection	PJ
			Fixed an issue where the timespan selector sometimes failed to set the dates correctly.
1034	2019-08-27	Client	16.1.115 - Report productionsettings	JH
			Adjusted how and which data is available in the report.
1032	2019-08-27	Collector	16.1.115 - Improved "No data received"	JH
			Removed issue where "No data from machine" during long time intervalls could cause the transactions to lag behind.
1031	2019-08-26	Client	16.1.115 - Production report detailed	pj
			A new report has been added called production report detailed. This provides data per machine and shows oee data, stop information, and an overview.
1030	2019-08-26	Client	16.1.115 - Production report machine statistics	pj
			Added mdt quantity and mtbf quantity to the report output.
1029	2019-08-26	eTouch	16.1.115 - New SF, Single calculated machine	JB
			A new special function (243) has been developed which makes it possible to separate production data from machines producing details for the same workorder and operation (card_no in Monitor).
1033	2019-08-25	Status	16.1.115 - Improved creation of FREC	JH
			Added support to set max amount of Days back FREC post can be created. Also adjusted how inactive Machines are handled in this regard. This is done to avoid huge queues of transactions.
1028	2019-08-23	eTouch	16.1.115 - First piece approval	JB
			Previously when approving first piece in eTouch, a annoying situation could arise if this status were not properly set in the Balthzar database, due to network errors or timeout-issues. A fix for this has been implemented which asks the operator to retry if this situation occurrs.
1027	2019-08-19	Client	16.1.113 - Internal activities scheduling	PJ
			Added possibility to schedule an activity on first or last monday, tuesday... each month
1026	2019-08-16	eTouch	16.1.113 - Report good quantity	PJ
			Fixed an issue where we in eTouch sometimes failed to report good quantity.
1025	2019-08-14	Client	16.1.113 - Machine line + parent in machines	pw
			Added machine lines in admin machines and a choice for parent
1024	2019-08-13	Client	16.1.113 - Run image 2 in machines	pw
			Added Run image 2 to admin machines, this will later be used in Balthzar dashboard
1023	2019-08-09	Client	16.1.113 - Material distribution	JH
			Adjusted issue where material distribution did not work when using import from Pyramid.
1022	2019-08-09	web	16.1.113 - Production settings from eTouch	JH
			Improved form used to enter production settings from eTouch. Added filter on input Group name and some touch based improvements, i.e., scroll buttons.
1021	2019-08-01	Client	16.1.113 - Admin Machines	pj
			It is now possible to add a machine configuration note in admin machines. This to store important information about how the machine is setup.
1019	2019-07-30	Client	16.1.113 - Admin Machines	pj
			Speed up the loading, updateding, saving and deleting of machines in admin.
1020	2019-07-30	Client	16.1.113 - Reporting scrap in eTouch	PJ
			Fixed an issue where we somtimes failed to report scrap if the system clock had the wrong format.
1017	2019-07-09	eTouch	16.1.113 - Adjustments to SF187	JB
			Specialfunction 187 has been changed so it now does not create tools when Monitor has changed its tooldescriptions of a tool that is already registered in Balthzar, as was the case earlier.
1018	2019-07-09	Client	16.1.113 Re-creating calendar	JB
			Re-creating calendars in Client earlier presented a dialogbox after pressing Save, which were placed below the form, making it impossible to answer. This is now corrected.
1016	2019-07-02	eTouch	16.1.113 Adjustments to SF90	JB
			The palletflag printed from specialfunction 90 has been updated to support UP-flags.
1015	2019-06-26	Client	16.1.113 - Dashboard overview	PJ
			The Find filter will no longer be visible in the dashboard overview objects.
1014	2019-06-25	Client	16.1.113 - Machine lines	pj
			It is now possible to create and administer machine lines under balthzar admin -> basic data -> lines.
1013	2019-06-24	Client	16.1.113 - Dashboard Menu	PJ
			The Dashboard Menu has been reworked and is now opened in a new form. In this we list all objects and lets the user manage the main settings of the object.
1012	2019-06-19	eTouch	16.1.113 - New SF (240) goods location	JB
			A new specialfunction has been developed which enables entering of goods location when reporting quantity or scrap. Some minor adjustments to the layout of the internal keyboard keys are made depending on the language used.
1010	2019-06-17	Client	16.1.112 - Input groups	JH
			When changing values in an input group the cells with production settings using synchronization will be gray to clarify that editing is not possible.
1009	2019-06-17	Client	16.1.112 - Split order in detail planning	JH
			When splitting an order in detail planning amount/package will be the same on the new order as the old one.
1011	2019-06-14	Client	16.1.112 - User settings	pj
			Significantly reduced the amount of time we download user setting for grids in client and eTouch
1008	2019-06-14	eTouch	16.1.112 - New special function 241	JB
			Special function 241 makes it possible to enter inputgroups of machinesettings from eTouch.
1007	2019-06-10	Scheduler	16.1.111 - Update files in internal activities	JH
			Adjusted function which updates documents used in internal activities. This function is moved to Balthzar Scheduler to easy change which user is used to access the files.
1006	2019-06-07	Client	16.1.111 - Adjust material on scrap	JH
			Added setting to scrap reason which toggle whether materials should be adjusted when reporting scrap.
1005	2019-06-05	Client	16.1.111 - Copy dashboard	PJ
			It is now possible to copy an existing dashboard. A new dashboard will be created with copies of all objects in the dashboard.
1003	2019-06-05	ERP	16.1.111 - Part type and Dynamics 365	JH
			Added import of part type when using ERP Dynamics 365.
1004	2019-06-05	ERP	16.1.111 - Start/Stop time and SAP-Import	JH
			Adjusted issue where some orders failed to import to balthzar from SAP due to invalid start and stop time.
1001	2019-06-03	Client	16.1.110 - Saved points in production settings	JH
			It is now possible to create a saved point and later access the value of the production settings at that time. A saved point may consist of the following; a point in time, a part number, a tool id and a machine id.
1002	2019-06-03	eTouch	16.1.110 - New SF, Disable employee verification	JB
			A new specialfunction 239 has been developed which makes it possible to override the standard employee-verification mechanism whis normally is used when using Monitor. This function allows any text entered, and performs no validation whatsoever.
1000	2019-05-29	eTouch	16.1.110 - New SF, WO/OP-texts	JB
			As of version 16.1.110, a new specialfunction (238) is introduced which displays workorder and operationtexts in eTouch below the list of planned orders.
995	2019-05-27	Client	16.1.109 - Report performance	PJ
			Improved the performance of report generation for all reports.
996	2019-05-27	Client	16.1.109 - Admin Machine	PJ
			On Machines in admin you can now add Manufacture, Type and size.
997	2019-05-27	Client	16.1.109 - Report Stop List	PJ
			In the report Stop list we now sort on show which line the machine belongs to before machine ID. We also write out the line no.
998	2019-05-27	Client	16.1.109 - Scrap pivot/graph	PJ
			Fixed an issue where the report Scrap pivot graph somtimes failed to show scrap when a tool were selected.
999	2019-05-27	Client	16.1.109 - Videojet Printer	JH
			Added support for continuously change print message on a VideoJet Printer.
994	2019-05-23	Client	16.1.109 - Report cavity reduction in tools	pj
			The report cavity reduction in tools have been updated so it is now possible to schedule.
993	2019-05-20	Client	16.1.108 - New report	pj
			A new report has been added called production follow up to excel. This report shows production data for the selection and creates a graph representing the data of the 24 last points.
991	2019-05-20	Client	16.1.108 - Detail planning	JH
			Adjusted issue where machine would not find detail planning when using sister machine.
992	2019-05-20	Client	16.1.108 - Synchronize files	PJ
			It is now possible to synchronize files from the db to client/eTouch. To do this you check Synchronize file when saving files in admin -> basic data -> files archive -> files
990	2019-05-16	Client	16.1.108 - List as input in production settings	JH
			It is now possible to create lists that are used as input in production settings.
989	2019-05-14	Client	16.1.108 - Log book list	PJ
			The report log book list now has the posibility to save settings and is possible to schedule.
987	2019-05-13	ERP	16.1.107 - Retry and dynamics	JH
			If Balthzar is unable to report to Dynamics due to an order being opened and locked by a user, balthzar will not stop trying after Three failed attempts.
988	2019-05-13	Client	16.1.107 - Log book list	PJ
			The log book list can now be accessed through the report section in client. There has also been some minor issues fixed in the report.
986	2019-05-13	ERP	16.1.107 - Report to Dynamics	JH
			Increased visibility in Communication between balthzar and Dynamics
984	2019-05-13	Scheduler	16.1.107 - Synchronized production settings	JH
			Production settings value can now be synchronized from an ODBC source.
985	2019-05-13	Client	16.1.107 - Custom report and scripting	JH
			Custom report layout now supports scripting
982	2019-05-07	Client	16.1.106 - Live data	JH
			The timestamp of live data will now be when the server received the change of value.
983	2019-05-07	Client	16.1.106 - Report OEE data	pj
			Added the posibility to get the report to excel with the same appearance as the report.
981	2019-05-06	eTouch	16.1.106 - eTouchs running order status	JB
			When starting orders from Client, orders were not shown in eTouch immediately. This has now been fixed.
980	2019-04-30	Client	16.1.106 - Production report machine statistics	PJ
			Added two extra fields to the output of production report machine statistics. MDT - Calculates the mean value of stops with the flag include in mdt selected. MTBF - Caluclates the time between stops with the flag include in mtbf selected.
979	2019-04-30	Client	16.1.106 - report stop list	pj
			Added 2 new fields to the output, employee and tool id. Fixed an issue where the own title where not correctly shown in the report.
978	2019-04-29	eTouch	16.1.105 - Palletflag printout	JB
			In rare circumstances, users were unable to print palletflags from historical orders. This has now been adjusted.
976	2019-04-29	Client	16.1.105 - Logg book.	PJ
			Fixed som issues with the logg book scaling.
977	2019-04-29	web	16.1.105 - report time distribution list 2	PJ
			Fixed an issue where the report failed to run if crystal reports where not installed.
975	2019-04-29	Client	16.1.105 - Property settings and multiple lines	JH
			It is possible to enter multiple rows on property settings.
974	2019-04-25	Client	16.1.105 Machine notes in eTouch	pj
			Five special functions have been added to add warnings in eTouch if a machine note has been updated, When the machine note has been read the warning is hiden until shift change or until the note has been updated.
973	2019-04-24	Client	16.1.105 -Tool/Machine property	JH
			Added possibility to manage both Machine - Property and Property - Machine in Tool/Machine property.
972	2019-04-23	Client	16.1.104 - Various improvement in prod, settings	JH
			Changed how and when data is reset and reloaded to better reflect the desired workflow.
971	2019-04-18	eTouch	16.1.104 - Signed in employee	JB
			The warning [No signed in employee] could earlier take you to a sign in screen with an employee shown as signed in (previously signed in). This has been adjusted so the list is reloaded at the time of display, reducing confusion.
970	2019-04-17	Client	16.1.104 - KPI report	PJ
			Changed the KPI grph report to a pivot grid graph so it easier to handle customize.
969	2019-04-15	eTouch	16.1.103 SF 214 adjusted	JB
			The scanning performed by using specialfunction 214 could earlier, in certain circumstances, result in double scans, which in turn resulted in double reportings. This has now been adjusted.
968	2019-04-11	Client	16.1.103 - Change machineID	JB
			As of version 16.1.103, a new functionality is introduced which makes it possible to change the machineID of existing machines to a new ID. This functionality can be reached from the Admin --> Miscellaneous menu.
967	2019-04-08	Client	16.1.102 - Reports to excel	PJ
			Fixed and issue where numbers was converted to text when reports where converted to excel files.
965	2019-04-08	Collector	16.1.102 - Import from SAP	JH
			Improved import from SAP to prevent missing orders during update of planning.
966	2019-04-08	Collector	16.1.102 - SAP import and IDOC	JH
			Import from SAP using IDOC-format now support additional order status. Further, issue with materials on operation 20 is now adjusted.
964	2019-04-05	eTouch	16.1.102 - Document issues in eTouch	JB
			When using the basefolder option for storing available documents combined with manually linked files, some unpredictable behaviour could be shown in eTouch, preventing the selected document to be shown, which has now been adjusted.
962	2019-04-05	ERP	16.1.102 - Changed time format in reporting	JH
			When reporting to Dynamics 365 time will be reported in decimal hours rather than minutes.
963	2019-04-05	ERP	16.1.102 - Added note on pallet flag	JH
			When reporting pallet flag to ERP the return message will be available in the note column.
961	2019-04-04	eTouch	16.1.102 - Issue switching between SF114-machines	JB
			When switching between machines who had SF114 active, the default page were not shown initially, which has now been changed. Occasionally a customization window appeared as well when doing this, which now have been corrected.
958	2019-03-29	eTouch	16.1.101 - Re-printing palletflag in batch	JB
			As of version 16.1.101 re-printing palletflags can be done in bulk from eTouch.
960	2019-03-29	eTouch	16.1.101 - Adjustment SF61, Scrap during setup	JB
			As of v16.1.101, if no Scrapcode during setup is entered in eTouuch while SF61 is active, entered number of scrapped quantity will instead work as target quantity, meaning good quantity will be adjusted to the entered number.
959	2019-03-29	Client	16.1.101 - Split stop reason and date format	JH
			Adjusted issue where split stop reason would function incorrectly if using a specific windows date format.
955	2019-03-28	eTouch	16.1.101 - New SF, use default printer	JB
			A new specialfunction (229) has been developed which prioritize the default printer over the documentprinter when printing documents from eTouch, directly from the list of documents.
956	2019-03-28	Client	16.1.101 - Extra info and Internal Activity	JH
			Extra info has been added to Internal Activity. Using this function the user creating the activity may be prompted to enter a number or text as supplementary information to the activity.
954	2019-03-28	eTouch	16.1.101 - New SF, Scrapprevention	JB
			A new specialfunction (228) has been developed which prevents negative scrapreporting exceeding the sum of previous registered scrap.
957	2019-03-28	eTouch	16.1.101 - Webpage as manually linked file	JB
			It is now possible to use a website as a manually linked document, which will be shown using previous conditions and/or the newly added Valid from/to and part_type_id-conditions. The webpage will be displayed in eTouch using a crude webbrowser, which only supports scroll and zoom.
953	2019-03-27	eTouch	16.1.101 Performance deviations in eTouch	PJ
			Fixed an issue where eTouch continued to show warnings for uncoded performance deviations for a short while when they had already been coded.
951	2019-03-24	eTouch	16.1.100 - Fixed palletweight, new SF	JB
			A new specialfunction (227) has been developed which always uses the weight specified on the workorder as palletweight, when reporting via palletflag printout.
952	2019-03-24	eTouch	16.1.100 - Deduct palletweight at reporting	JB
			A new specialfunction (226) has been developed which always deducts a companyspecific weight representing the palletweight, when reporting via palletflag printout.
950	2019-03-22	Client	16.1.100 Nice label layout name	PJ
			A label layout name can now be entered on machines etouch parameters. If this name is set this name will be used instead of the one set on the work order.
949	2019-03-22	Client	16.1.100 Dahboard own value	PJ
			The Dashboard object Own value now has the option to tone the backcolor of the component from the set backcolor to light or to dark.
948	2019-03-19	ERP	16.1.99 - Failed material and pallet flag	JH
			It is now possible to manually handle materials and pallet flags which has failed to be sent to the ERP-system.
946	2019-03-18	Client	16.1.99 - Alert message and internal activity	JH
			When running Internal Activity stand alone a pop-up message will notice the user if a new activity is available.
947	2019-03-18	ERP	16.1.99 - Retry on scrap transfer	JH
			Balthzar will now try to transfer scrap and manual quantity Three times.
945	2019-03-14	ERP	16.1.99 - Time and retry	JH
			When transferring time transactions to ERP-system Balthzar will stop trying after Three failed attempts.
943	2019-03-12	Client	16.1.98 - Performance deviation coder	PJ
			The Performance deviation coder have been modified to correctly store the layot and to also save the position of the performance codes.
944	2019-03-12	ERP	16.1.98 - Cancellations and reporting	JH
			When reporting cancellations to ERP balthzar will try Three times Before stopping
942	2019-03-12	Client	16.1.98 - Production report	PJ
			The Production report now has a new to excel button that only contains the raw data and not the appearance of a regular report.
941	2019-03-11	ERP	16.1.98 - Materialreportings	JH
			Balthzar will now try to report material to the ERP system 3 times before stopping.
940	2019-03-08	eTouch	16.1.98 - eTouch in background, new SF	JB
			A new special function (223) has been developed which makes eTouch stay in the background, not trying to steal attention from other programs.
939	2019-03-07	Scheduler	16.1.98 - Pallet flags to nice label	JH
			Adjusted issue where certain characters in a print job could cause issues when using nice label.
938	2019-02-28	eTouch	16.1.98 - Delayed reporting, SF222	JB
			As of v16.1.98, manually reported quantities can now be delayed until a specified time of the day, via the specialfunction 222. This can be useful when separate pallets are reported in Balthzar, but bigger batches are preferred to be handled in the ERP system.
937	2019-02-28	eTouch	16.1.98 - Reduced webserver calls	JB
			A few instances where periodic redundant calls to the Balthzar webserver from eTouch has been identified and adjusted, which will reduce the webserver load to some extent.
936	2019-02-27	Client	16.1.98 - Internal Activity and new activities	JH
			When running Internal Activities as a standalone application the taskbar will flash if a new activity is present.
935	2019-02-26	Client	16.1.97 - Update historical production settings	JH
			When starting input Groups from balthzar client using an administrative account you can set a timestamp to the production setting value.
934	2019-02-26	Client	16.1.97 - Deviation performance and default code	JH
			Deviation performance will now use -0, -10, -20, -50 and -99 as default code.
926	2019-02-22	Client	16.1.97 - Manual documents, unused parts	JB
			Manual documents can now be attached to non-existing parts (parts that later on will be used).
932	2019-02-22	Client	16.1.97 performance deviation reports	PJ
			The reports Performance deviation pivot graph and performance deviation list had some minor issues that has been corrected.
933	2019-02-22	eTouch	16.1.97 - Changing palletflagprinter eTouch	JB
			As of version 16.1.97 it is possible to change which printer is used when printing palletflags, among those already registered in Balthzar. Currently used printer is displayed on the button which is used to change it.
924	2019-02-21	eTouch	16.1.97 - Workorder quantity from planning	JB
			Workorders which are started from Balthzars planned workorders were previously automatically updating running workorders workorder quantity, unconditionally. This resulted in problems with customers using alternative recalcfactors. A new special function (221) has been developed adressing this issue.
923	2019-02-21	Client	16.1.97 - Machine/Part setting horizontal view	JH
			When viewing Machine/Part setting in horizontal view the column Part No is now locked to the left of the grid and thus always visible when scrolling.
925	2019-02-21	eTouch	16.1.97 - Warehouselocations (SF220)	JB
			Customers running Monitor can now show the warehouselocations materials are stored in, in eTouch, along with their relevant information, much in the same way as Monitor displays the same information, by activating special function 220.
922	2019-02-20	ERP	16.1.97 - ERP reporting and compression	JH
			Adjusted issue where compression of manual reportings could fail.
920	2019-02-18	Client	16.1.96 - Report performance deviation list	PJ
			A new report has been added named performance deviation list that shows a list of all performance deviations in the selected range.
921	2019-02-18	Client	16.1.96 - User name in own overview	JH
			The tag <%username%> is added to own overviews and will be replaced with the currently logged in user.
919	2019-02-18	Client	16.1.96 - Report performance deviation pivot graph	PJ
			A new report has been added named performance deviation pivot/graph that shows a pie chart of how many times performance deviations have occured, and if they are coded/uncoded.
918	2019-02-17	Client	16.1.96 - Searchenabled SF-funcitions Admin	JB
			In Admin, the handling of special functions are now searchable in both machine and specialfunction grids.
915	2019-02-15	Status	16.1.96 Automatic stop reason handling on machine	PL
			Until now automatic stop reasons upon stop have always been active if the machine has been setup to have that. This is now changed. Automatic stop reasons on the machine will not be activated if the machine is in setup mode. Normally the machine is in setup mode from new order start until first piece control has been conducted.
916	2019-02-15	Client	16.1.96 - Manually linked documents and changes	JH
			It is now possible to notify operators using eTouch if a manually linked document has changed.
917	2019-02-15	Client	16.1.96 - Machine note in eTouch	JH
			The note in eTouch will now be stored as a machine note and thus be accessible from client and dashboards.
912	2019-02-13	eTouch	16.1.96 - Smart guide and linked machine	JH
			It is now possible to link a smart guide station to a machine. When starting an order on the smart guide it will try to start the order running on the linked machine.
913	2019-02-13	Client	16.1.96 - Smart guide admin and PDF	JH
			It is now possible to add files to smart guide instruction using a standard file dialog.
914	2019-02-13	Client	16.1.96 - Adjustable part list in smart guide	JH
			It is now possible to manually adjust the with of the list of parts when editing instructions in smart guide.
910	2019-02-12	eTouch	16.1.95 - Print quick report from eTouch	JH
			It is now possible to print Quick reports on eTouch. The print job will be sent to the set document printer. The document printer are setup in the eTouch parameters.
911	2019-02-12	Client	16.1.95 - Report production settings	JH
			Adjusted issue where production setting report sometimes would fail when generating on a planned order.
908	2019-02-11	Client	16.1.95 - Report OEE data	PJ
			Fixed an issue where the report OEE data calculated both manually reported and machine counted even if the machine was set to only use one of the two values.
907	2019-02-11	Scheduler	16.1.95 - Increased mail and sms send frequency	JH
			Balthzar will now check for and send SMS and email each 10 seconds instead of each minute.
909	2019-02-11	Client	16.1.95 - Performance deviation coder	PJ
			In eTouch it is now possible to code performance deviations if SF218 or SF219 is active
905	2019-02-08	eTouch	16.1.95 - SF Admin	JB
			As of v16.1.95 the previous way of administering special functions has been abandoned, in favour of a method which handles specialfunctions on a machine basis or SF-basis. Two new menu-options in the eTouch-menu have been added for this.
906	2019-02-08	eTouch	16.1.95 - eTouch - Historical orders	JB
			A new column has been added in the Historical orders grid in eTouch, which makes it possible to print pallet flags using SF210. This addition may, unfortunatly, require a re-design of the column-layout in this grid. If that is the case, the column-chooser will be shown automatically.
904	2019-02-08	Scheduler	16.1.95 - Performance and scheduled activity	JH
			Greatly increased the performance in scheduled activities
903	2019-02-07	eTouch	16.1.95 - Documentdisplay - eTouch	JB
			Previously an order was required to display attached documents, which is now removed. This has been done in order to handle the recently added function to manually add documents with only the machine as a linking term.
901	2019-02-06	Client	16.1.95 - Production report machine	PJ
			Fixed an issue where the report "Production report machine" failed to generate.
900	2019-02-06	eTouch	16.1.95 - Manual machine, alt. reporting	JB
			With special function 217 a new way of reporting quantities for manual machines is available. At startup at multiplicator is entered, which is the quantity which will be reported using a + and - button. A complementary button is also displayed as a shortcut to the standard reporting form for quantity.
898	2019-02-06	eTouch	16.1.95 - Alternative filenamedisplay	JB
			A new special function (215) has been developed which displays the filename after the description when listing files available for viewing/printing in eTouch, pertaining to a specific order.
899	2019-02-06	eTouch	16.1.95 - Manual machine without signing in
			A new special function (216) makes it possible to run manual machines without being signed in at the machine in question.
902	2019-02-06	Scheduler	16.1.95 - Performance code and Shift	JH
			When evaluating the performance of a machine the shift will be taken into account.
897	2019-02-04	Client	16.1.94 - Performance deviations	JB
			Performancedeviationcodes /-groups can now be maintained in Admin.
895	2019-02-01	Scheduler	16.1.94 - Performance review	JH
			It is now possible to evaluate machine performance and set up limits on when we are running to fast or slow.
896	2019-02-01	eTouch	16.1.94 - Systemperformance	JB
			In version 16.1.94, a major cause of performance degradation has been identified and adjusted in eTouch, which hopefully will resolve performanceissues at selected customers.
894	2019-01-29	Client	16.1.93 - Input using groups	jh
			It is now possible to use an input form where entire input groups can be edited. These input groups may include part, tool and machine settings.
891	2019-01-29	Client	16.1.93 - Production settings and I.A	jh
			It is now possible to use an input group for production settings instead of a checklist when using internal activities.
892	2019-01-29	Client	16.1.93 - Report production settings	jh
			It is now possible to use Output Groups in this report.
893	2019-01-29	Client	16.1.93 - Input/Output groups	jh
			It is now possbile to create groups for output and input in production settings. These groups can be used to customize input/output of production settings in reports.
890	2019-01-28	Client	16.1.93 . Pivot graph reports	PJ
			Fixed an issue where some pie charts failed its colorization when multiple pies where shown.
889	2019-01-28	Client	16.1.93 - Report Time Distribution Stop Reason	PJ
			The report now Time Distribution Stop Reason pivot graph now has a new standard layout where the stop time is shown in the legend.
888	2019-01-25	Client	16.1.93 - Quick reports in eTouch	pj
			It is now possible to create quick reports in balthzar client that can be shown in eTouch.
887	2019-01-22	Client	16.1.93 - Rejection report	PJ
			Fixed a bugg in the rejection report where the new selection failed to be removed in the selection.
886	2019-01-22	Client	16.1.93 - Report stop list	PJ
			Fixed a bugg in the stop list where from zone did not register.
885	2019-01-18	eTouch	16.1.93 Scheduled downtime	JB
			Customers who use the alternative serverfunction can now define 2 downtimes a day when automatic switches between servers are not used, giving the IIS server time to re-boot on a scheduled basis.
880	2019-01-16	Client	16.1.92 - Rejection report	PJ
			A new selection has been added to the rejection report, weighted scrap. This selection multiplies the rejection with the unit cost to get the price of the rejection instead of the nr of units.
881	2019-01-16	Client	16.1.92 - Production settings and groups	JH
			All different production settings will now use the same Groups.
882	2019-01-16	Client	16.1.92 - Production settings report	JH
			Added new report for production settings. This report also uses the new report design feature.
879	2019-01-15	Client	16.1.92 - new dashboard object	PJ
			A new dashboard object called Image from SQL has been added. It lets you set five different images to be shown depending on witch values the SQL Query return.
878	2019-01-11	Client	16.1.92 Report stop list 2	PJ
			Fixed a bugg in the report stop list 2 that made the report ignore the stop reason selection
884	2019-01-11	eTouch	16.1.92 New SF, 214 Scan part to WO	JB
			With this SF active, the default packaging quantity will be reported on the topmost prioritized workorder with the scanned part, when a barcode containing the partnumber is scanned at the machine. Requires Monitor as ERP system.
883	2019-01-10	eTouch	16.1.92 New SF, 213 WO in progress as startuppage	JB
			With this special function active, the Workorders in progress acts as the default page in eTouch.
877	2019-01-07	Client	16.1.91 - Export detail planning	JH
			Right clicking on the detail planing/planned order will allow export to .XLs/.xlsx/.pdf.
876	2019-01-07	Client	16.1.91 - Force delete from detail planning	JH
			Shift+Clicking on the delete from detail planning button will now force delete the entire row from the planing.
875	2018-12-20	Client	16.1.91 - Sql queries	pj
			Sql queries can now have a query target, i.e. where the query will be used.
874	2018-12-19	eTouch	16.1.91 - New SF, running workorders as startpage	JB
			A new specialfunction (213) has been developed which makes the Running workorder-page a startpage, meaning this is the default page which will be shown when returning from another used function in the menu, such as report good/scrap quantity, print pallet flag etc. See documentation for further information.
873	2018-12-19	eTouch	16.1.91 - Redesigned running workorders, eTouch	JB
			As of version 16.1.90, the Running workorder form in eTouch is redesigned to use a Devexpress grid, making it more userfriendly than before.
872	2018-12-17	Client	16.1.90 - Machine/Tool settings	JH
			Production settings for Machine/Tool will now correctly use Machine to store properties instead of tool.
871	2018-12-13	Client	16.1.90 - Admin and production settings	JH
			Admin for Part Settings will now correctly be displayed when pressing Part Settings in the Production Settings menu.
869	2018-12-10	eTouch	16.1.90 - New SF (212), Resume setup	JB
			A new special function has been developed which displays a menubutton in the main menu of eTouch when setups are aborted. This button resumes setuptime. The button is otherwise hidden.
870	2018-12-10	Client	16.1.90 - Rejection report	PJ
			Fixed an error with the rejection report (kassationrapport) where it failed to handle toolIDs containing colon
866	2018-12-07	Client	16.1.89 - Warning in I.A in Client	JH
			Client will no longer warn about future Internal Activities.
868	2018-12-07	eTouch	16.1.89 - 0 as quantity of palletflag	JB
			Palletflags can no longer be printed with 0 as quantity from eTouch.
867	2018-12-07	eTouch	16.1.89 - Re-printing pallet flag	JB
			In eTouch, the grid showing already printed palletflags have been replaced with a DevExpress-grid, which enables machinespecific displayconfigurations.
862	2018-12-03	ERP	16.1.88 - Report pallet flag quantity to ERP	JH
			When using Dynamics 365 as ERP it is now possible to report the amount on a pallet flag.
864	2018-12-03	eTouch	16.1.88 - Re-printing palletflag with SF13	JB
			As of version 16.1.88, re-printing of palletflags kan be done even if sepcialfunction 13 is active (Palletflag without reporting)
863	2018-12-03	Client	16.1.87 - Report Process log	PJ
			Fixed a bug in the report process logging that that removed zeroes from the graph in the report process logging
865	2018-12-03	Client	16.1.87 - Show future activities	JH
			It is now possible to toggle view future created Internal Activities.
860	2018-11-29	eTouch	16.1.87 - Pallet flag and nice label	JH
			Printing pallet flags via Nice Label is now supported.
861	2018-11-29	Client	16.1.87 - Failed Reporting in SAP-IDOC	JH
			Increased traceability when managing failed reportings to ERP using SAP-IDOC.
856	2018-11-26	web	16.1.86 - Production settings in admin	JH
			Production settings in admin has been moved from Parts -> Production settings to a new top menu choice.
858	2018-11-26	Client	16.1.86 - Report OEE - data 2	pj
			New selection criterias have been added to the report OEE data 2. Machines : A dropdown with machines where you can select witch machines to add. OEE 24/7 : Allows you to calculate the OEE value by multiplying T0% * A% * K%
857	2018-11-26	Client	16.1.86 - Production settings machine	JH
			A new feature, Procuction setting machine, is now available. It performs the same as Production setting part but uses machine ID instead of part number.
859	2018-11-26	Client	16.1.86 - Report Stop list	PJ
			Added new selection criteria to the report stop list. Top x nr of stops : Selects the x machines containing most stops in the selection.
852	2018-11-21	Client	16.1.86 - SQL Doc	JB
			As of this version, a new menuitem has appeared in the Client main form called SQL help. This menuoption opens a machinegenerated documentation of selected parts of the Balthzar database. This can be useful for reference as userdefined SQL queries are built. This documentation will only be available in english.
851	2018-11-19	eTouch	16.1.86 - Ending orders in eTouch	JB
			When viewing running orders in the special form for viewing more than 2 running orders in eTouch, you could sort the orders in a alternative fashion. When doing so, the program retained the original sorting internally, which made it possible to mark an order and press finish order, resulting in the ending of another order, which were originally at this place in the list.
848	2018-11-13	Client	16.1.86 - Multiple conditions in checklist	JH
			Adjusted issue where not all selected conditions where displayed as selected.
849	2018-11-13	Client	16.1.86 - Overview	pj
			Machines that is not set to active in machine settings is no longer shown in the overview.
844	2018-11-12	Client	16.1.85 - Performance and OPC-connector	JH
			Greatly decreased the idle network usage of the OPC-connector.
847	2018-11-12	Client	16.1.85 - Move internal activity	JH
			It is now possible to move an activity, i.e., change the type and time of the activity. This feature is only accessible from Client.
845	2018-11-12	eTouch	16.1.85 - Adjusted SF190	JB
			The requested input by special function 190 (Enter number of boxes on last pallet) can now be bypassed in a more intuitive way, by use of a added button, if wrong order was started.
846	2018-11-12	eTouch	16.1.85 - Re-printing palletflags, eTouch	JB
			When re-printing palletflags, difficulties may arise pertaining to the difficulty of identifying which palletflag that needs to be re-printed. Additional columns have been added in the form which makes this identification easier (good quantity and scrap quantity).
854	2018-11-12	Client	16.1.85 - Production setting tool/machine	JH
			A new feature, Procuction setting tool/machine, is now available. It performs the same as Production setting machine but uses tool ID instead of machine ID.
855	2018-11-12	Client	16.1.85 - Production setting machines new name	JH
			Production setting Machines has been renamed to Production setting Part/Machine.
853	2018-11-12	Client	16.1.85 - Production settings tool	JH
			A new feature, Procuction setting tool, is now available. It performs the same as Production setting part but uses tool ID instead of part number.
843	2018-11-09	Client	16.1.85 - Automatic stopreasons	pj
			Automatic stopreasons now use the new input data (zones, categories, departments, calendar, day of week)
842	2018-11-07	Client	16.1.85 Production report machine statistics	pj
			The report "Production Report machine statistics" now Allows to set availability level from and to in the input. In the output M% has been added.
841	2018-11-01	Client	16.1.84 - Erroneous reports using SAP-IDOC	JH
			When using ERP Connection SAP-IDOC it is now possible to explore failed reportings and retry or remove them
840	2018-10-30	Client	16.1.83 - Dashboard own value	pj
			It is now possible to hide the value text and set the text alignment in the dashboard object own value.
839	2018-10-30	Client	16.1.83 Dashboard overview fields	pj
			The dashboard object overview now contains the fields that was previously only visible in the client overview.
838	2018-10-29	eTouch	16.1.83 - New SF 211, palletflagverification	JB
			A new specialfunction (211) has been developed which verifies that the amount of palletflags which are to be printed from eTouch, is the intended amount, preventing unintentional excess printouts when employees accidently enters their employeenumber instead of number of copies
837	2018-10-29	Client	16.1.83 - Output on internal activity	JH
			It is now possible to start new activity and/or receive e-mail when an internal activity is closed. Different output on different status is supported.
836	2018-10-22	eTouch	16.1.83 - Employeeverification Pyramid	JB
			As of version 16.1.83, verification of employees are now performed using the D2611_Persontyp field in addition to the previously used D2601_Signatur. D2611_Persontyp needs to be diffirent from NULL and empty, to be considered valid.
835	2018-10-19	Client	16.1.83 - Write only value as processvalue	JH
			When a process values access is set to Write no subscription of this value will occur.
834	2018-10-16	eTouch	16.1.83 - eTouch with keyboard	JB
			Manual reporting of quantities (good/scrap) in eTouch have been simplified when using a keyboard by re-arranging the order in which the controls receives focus when pressing the tab-key, to a more intuitive sequence.
833	2018-10-16	eTouch	16.1.83 - SF207, Materialreporting at palletflag	JB
			A new specialfunction has been developed which makes automatic materialreportings when printing palletflags. The reportings are made as the quantity on the palletflag multiplied with the structural quantity for the main part, in one structural level.
829	2018-10-15	Client	16.1.83 - Ignore limit color	JH
			When using process value limits in internal activities, it is possible to ignore the color used for that limit.
828	2018-10-15	Scheduler	16.1.83 - Email and scheduler	JH
			It is now possible to configure the sender address used in scheduling reports. Further, it is possible to toggle if SSL should be used.
830	2018-10-15	eTouch	16.1.83 - SF209, Numerical employee	JB
			A new special function has been developed which makes it possible to present the numerical only keyboard at certain forms in the program where employeenumber is required, and a alphanumerical keyboard was presented. Right now the functions supported are cavityreduction, good quantity/scrap reporting and performing internal activities from eTouch. (Does not work in standalone-mode, since SFs are activated at machines.)
831	2018-10-12	eTouch	16.1.82 - Maintenance-version	JB
			The 16.1.82 version was considered a maintenance-version where no new generic functionality were added.
827	2018-10-09	Client	16.1.81 - Output on checklists	JH
			It is now possible to attach "output events" on checklists in Internal Activity. Currently it is possible to do this when using "Yes/No"-type of input.
826	2018-10-05	Client	16.1.81 Added fields in Admin Auto stopreasons	AS
			#21679 updated auto stopreasons with department, zone, category and calendar.
822	2018-09-26	Client	16.1.81 Added Mac address in object machine	AS
			Added txtMachine_mac_address in object machine, tab 2.
817	2018-09-24	Client	16.1.80 - New Dashboard object	PJ
			A new dashboard object has been added called Machine status, image. This object shows different images depending on the machine status. It can show one image when running and select between two different images per stop reason. The images must be set onto the specific stop reason (for stop images) or machine (for run image). This object try to be on top always so you can put it over another object.
816	2018-09-24	Client	16.1.80 - Adjusted process value on time	jh
			When using a process value with collection type interval, it is possible to adjust the value from without the time difference between the real subscription time and the planned subscription time.
818	2018-09-24	Client	16.1.80 - Detail planning and locked	JH
			Bundles in detail planning will no longer be locked.
820	2018-09-24	web	16.1.80 Scrap changed to manual reports	AS
			Scrap changed to Manual reports, new icon.
819	2018-09-24	web	16.1.80 - New field on machines	AS
			Added the fields run image to machine, which are used in the new dashboard object "machine status, image".
821	2018-09-24	web	16.1.80 - field added to stop reasons	AS
			Added the fields stop image 1 & 2 to stopreasons, which are used in the new dashboard object "machine status, image".
815	2018-09-17	Client	16.1.79 - Stop reason from process value	jh
			It is possible to set a stop reason when a process value Changes. The stop code may be a constant or another process value.
813	2018-09-11	Client	16.1.79 - Report OEE-data,	pj
			Changed the report OEE data to make it more failsafe and improved its ability to detect errors and thus not show false data.
814	2018-09-11	Client	16.1.79 - Report Stoplist 2	PJ
			Added a new selection choice in the report stoplist 2 that allows you to only show machines that have more than x stops, where x is the number you input. (not the quantity of lines in the report but the numbers of times the machine have stopped.)
812	2018-09-04	eTouch	16.1.78 - Special function 206	JH
			Added Special function 206, which will disable the normal way of calculating planned and real speed. The real speed will be calculated from without the manual reportings.
810	2018-08-31	ERP	16.1.78 - Watchdog in FireDaemon-mode	JB
			As of version 16.1.78 it is possible to configure (via .ini-file) and run Balthzar_Watchdog in Firedaemon, managing only the kill-hanged-process routine, leaving the startup to FireDaemon. The intention of doing this is to handle certain thirdparty components crashing when transferring transactions to Monitor, primarily.
811	2018-08-31	eTouch	16.1.78 - Cavity reduction and events	JH
			Changing cavities in eTouch will no longer result in a stop workorder event.
809	2018-08-28	Scheduler	16.1.78 - Automatic scheduled stop reason	jh
			It is now possible to set up automatic scheduled stop reasons. This function will change a stop code to Another, on a machine in a time interval.
808	2018-08-27	Client	16.1.77 - Production report machine statistics	PJ
			The dashboard object machine status now uses the stopreason text if it has been set. Thus it is possible to adjust the stop reason text color so the text always is readable. If the text color is set to Automatic or not set at all it will show the standard text color set on the object.
806	2018-08-27	Client	16.1.77 - Stopreason text color	pj
			It is now possible to add text color to stopreasons which color should be used for text. This setting is currently only used in the dashboard object machine status.
803	2018-08-24	Client	16.1.77 - Process value limits and color	jh
			It is now possible to define which color should be used to indicate if the entered value in an internal activity is outside the nominal value.
805	2018-08-24	eTouch	16.1.77 - Reading planned orders failed indication	JB
			If eTouch fails to read planned orders (due to network errors or some other reason), there was previously no indication that this happened. As of version 16.1.77 the headers of the planned orders list are marked in red when/if this occurrs. Any subsequent attempt that succeeds resets the font back to black.
804	2018-08-24	Scheduler	16.1.77 - Decreased print time	jh
			Decreased the overall time to print documents and pallet flags in balthzar.
801	2018-08-20	Client	16.1.77 - Dashboard Scale	pj
			Fixed a bugg in the dashboard that made the scaling fail under certain conditions.
802	2018-08-20	Client	16.1.77 - Production report machine statistics	pj
			Fixed a bugg that occured when the selection "show per stopreason" was selected. The report now also shows runtime for the selected machine
800	2018-08-14	Client	16.1.76 - Report OEE data 2	pj
			The report OEE data 2 has a new selection, show aditional information, that adds four extra columns, produced quantity, target quantity, diff quantity and diff time.
799	2018-08-13	eTouch	16.1.76 - New SF, (205) Stops by department	JB
			A new specialfunction has been developed that makes it possible to show uncoded stops for the department a certain machine belongs to, making it possible to code them in the list containing uncoded stops in eTouch. The warning of uncoded stops displays the quantity of uncoded stops for the whole department current machine belongs to.
798	2018-07-06	Client	16.1.76 - Cancel Internal Activity on cycles	JH
			It is now possible to set duration on an internal activity in cycles instead of minutes. In short, this means that the activity is cancelled after the machine has performed a set amount of cycles since the activity started.
797	2018-07-05	eTouch	16.1.76 - New SF (204), searchstart	JB
			It is now possible to configure the number of characters needed to be entered before search is performed in the Search parts form of eTouch. (If not configured, 3 is the default number of characters.)
796	2018-07-05	eTouch	16.1.76 - New SF, Ordersummary (203)	JB
			A new specialfunction has been developed which presents a form when ending an order, which describes quantities planned, produced and scrapped. If those quantities are not correct, the user can abort the process of finishing the order
795	2018-07-05	eTouch	16.1.76 - Internal Activities in eTouch	JH
			It is now possible to press enter instead of Save when entering employee number in eTouch before performing an activity. The refresh timer on the activity list is decreased to 20 seconds.
794	2018-07-03	Client	16.1.75 - Admin	pj
			In Balthzar Admin the grids in tools, parts and process values have been replaced with another grid to allow saving of layout and having access to a smart search function.
793	2018-07-03	Client	16.1.75 - SF186 Automatic order start	JH
			Fixed issue where SF186 could stop a work order after it was edited.
789	2018-07-02	Status	16.1.75 - Minimum time before signout	JH
			It is now possible to set a minimum time which the employee must be signed in to balthzar Before automatically being signed out at shift break.
790	2018-07-02	eTouch	16.1.75 - New SF, Pyramid,palletflaginfo available	JB
			A new special function has been developed that makes it possible to verify that all data has been fetched from Pyramid that was intended. If printout is attempted before that has occurred, the user is prevented from entering the palletflag form in eTouch.
791	2018-07-02	Client	16.1.75 - Automatic update Internal Activity PDF	JH
			It is now possible to activate automatic update of the PDF-file in both checklist and checklist lines. If this flag is set, the server will look for a newer version of the file Before starting an activity. If such a file is found, it will be used instead. This means that the server must have read rights to the files updated this way.
792	2018-07-02	Client	16.1.75 - Internal activity file manager	JH
			In Balthzar Client under Tools -> Option -> Internal Activity -> Files it is possible to monitor and manage files used in checklists in internal activity. From here you can se status of files, open the current files, manually update files and change the path to the file.
788	2018-06-29	eTouch	16.1.75 - New SF, forced cycletime	JB
			A new specialfunction (201) has been developed which forces the planned cycletime of each started order to be a specified value supplied on the machine.
785	2018-06-28	eTouch	16.1.75 - New special function, toolinserts	JB
			A new special function (200) has been developed that makes it possible to only show wavailable inserts when plugging cavities from eTouch/Client. A Admin form has been added to administer these possible inserts as well.
786	2018-06-28	eTouch	16.1.75 - Changes to SF 174	JB
			Special function 174 (Tool status Monitor) have been extended to search for status of virtual tools, and display the status that is most relevant of those, given that the main tool does not have a status itself.
787	2018-06-28	eTouch	16.1.75 - Preventing double orderstart	JB
			When running two eTouch on the same machine on two diffirent screens (as might be the case when lines are used), it was previously possible to start two instances of the same order, even if the machineconfiguration would not allow it. This is prevented from now on.
781	2018-06-25	Client	16.1.74 - Dashboard object split text.	PJ
			Split text now has an extra setting "Show Machine description" which replaces the machine ID with the machine description.
782	2018-06-25	Client	16.1.74 - Constant process value	jh
			Added support for a constant process value. This value only changes once during startup.
783	2018-06-25	Client	16.1.74 - Scrap on process value	jh
			Scrap on process value now supports recalc factor.
784	2018-06-25	Client	16.1.74 - Ignore stop reason on scrap	jh
			When using scrap on process value it is possible to ignore the current stop reason. I.e., ignore the usage of count on forced stop.
780	2018-06-18	ERP	16.1.73 - Adjusted export to SAP-IDOC	JH
			Added support to adjust good quantity in SAP using export format SAP-IDOC.
779	2018-06-15	eTouch	16.1.73 - Multiple materials in eTouch	JB
			Those customers not running Monitor and are using the Material-tab in eTouch, can now select multiple rows and report simultaneously on all of them, given that they share the same unit and quantity to report.
778	2018-06-14	eTouch	16.1.73 - Red background, running order eTouch	JB
			In eTouch, the default behaviour was previously to mark the background with red color as soon as produced good qty exceeded 90%. This has been changed so the percentage is configurable in eTouch parameters. (Default remains 90%, so there is no need to edit existing values if you are satisfied with the current, default setting.)
777	2018-06-11	eTouch	16.1.72 - SF198, Missing recepie warning	JB
			A new specialfunction has been developed which makes it possible to abort orderstart if started part is missing a recepie. Customerspecific adaptation.
775	2018-06-11	eTouch	16.1.72 - Special function 88	JH
			Special function 88 will now display production information about the current shift. Note: This change will only occur on machines not already using this special function.
776	2018-06-11	Client	16.1.72 - Good quantity from OPC-value	JH
			Adjusted issue where good quantity from OPC-value would sometimes miss to report on change.
774	2018-06-08	eTouch	16.1.72 - Part type and work order
			Adjusted issue where order could be started using wrong part type.
773	2018-06-04	Status	16.1.71 - Transactions from inactive machines	JH
			Transactions from inactive Machines will no longer cause the system to stop updating information.
772	2018-06-01	eTouch	16.1.71 - Adjustments to SF99	JB
			Adjustments to SF99 has been made that prevents reportings from being entered in eTouch without and attached order. In previous versions, this were possible when reporting on a previously non started workorder.
771	2018-05-30	eTouch	16.1.71 - Extended partdescription	JB
			The partdescription in the planned and running orders list in eTouch have been extended to 200 characters, from their previous 40.
769	2018-05-25	eTouch	16.1.70 - SF190, Quantity on pallet	JB
			The special function 190 has been adjusted, so any quantity can be entered, as well as zero, if wrong order were initially started.
768	2018-05-25	Status	16.1.70 - Improved Watchdog	JB
			Balthzar Watchdog has been found to, under certain circumstances, ignore that Balthzar ERP stopped sending signals that it was alive, and therefore not killed the application correctly when needed. Efforts have been made to circumvent this. Primarily affects customers running Monitor ERP system.
770	2018-05-25	eTouch	16.1.70 - Planned order, deletionpercent	JB
			A new parameter has been added to Admin for machines, making it configurable when a planned order should be deleted (if at all) by calculating a percentage of good quantity in relation to planned quantioty, which needs to be exceeded. This occurrs when finishing orders. NOTE : This setting does not prevent imports of the same order removed this way.
767	2018-05-21	Client	16.1.69 - Lock row in checklist	JH
			It is now possible to lock a checklist row when using standard value from a process value.
766	2018-05-16	eTouch	16.1.69 - Changes to report Stopreasonanalysis	JB
			In this version, changes have been made in the selection-parameters for the Stopreasonanalysis, which may affect scheduling-functionality. If this is a scheduled report for you, and you are missing the delivery of one or more of this report, please re-configure the schedule for it, or contact Delacroy for further assistance.
765	2018-05-15	Status	16.1.69 - Special function 161	JH
			Adjusted automatic print of ERP documents to only print documents flagged for printing.
764	2018-05-15	web	16.1.69 - Process value without data collection	JH
			It is now possible to create an process value with no data Collection. This may later be used to store values from other process values or modules.
762	2018-05-09	Client	16.1.69 - Report stop list changed	pj
			Added two new search criterias when generating the report stop list, stop reason (was there but you could only select one) and stop group. Both of these are multiselect components, so you can select more than one. This change might require you to redo your scheduled reoports.
763	2018-05-09	Client	16.1.69 - Dashboard machine status	pj
			The dashboard object machine status now has a new setting, "Only show machine and stop color". This setting changes the component to just one box with machine id and sets the color to current stop reason color (or green if it is currently running)
760	2018-05-08	Client	16.1.68 - Report stop reason analysis	pj
			Added two new search criterias when generating the report stop reason analysis, stop reason and stop group. Both of these are multiselect components, so you can select more than one. This change might require you to redo your scheduled reoports.
761	2018-05-08	Client	16.1.68 - Internal activity events to machine	JH
			When creating an event for internal activities it is possible to decide which machine the new activity should be created on.
758	2018-05-04	Client	16.1.68 - Process value and UDP-scanner	JH
			Added a special function to handle UDP-scanning of pallet flag.
759	2018-05-04	Client	16.1.68 - Machine in delivery certificate	JH
			Added machine for the work order in the delivery certificate.
755	2018-05-03	Client	16.1.67 - Process value and interval	JH
			It is now possible to subscribe to a process value and get a subscription each x:th second, regardless of if the value has actually changed.
756	2018-05-03	Client	16.1.67 - Process value and hex-string	JH
			Balthzar now supports converting arrays of ASCII values to string.
757	2018-05-03	Client	16.1.67 - Process value counter	JH
			A new counter has been added for process values. This counter will increase with the value of the subscription.
754	2018-04-25	eTouch	16.1.66 - SF197, Awaiting recipe, altered	JB
			Specialfunction 197 now shows its status for each running order in the running order list, instead of its former separate window.
752	2018-04-23	Client	16.1.66 - Production settings in client	pj
			The production settings windows available from admin -> parts is now also available from the menu in client. It is possible to set which security level it should be have in admin -> securty per site - client.
751	2018-04-23	eTouch	16.1.66 - eTouch Process logg	pj
			The window in eTouch that shows process loggs is changed and now looks like livedata in client and has the same settings.
753	2018-04-23	Client	16.1.66 - Client size	pj
			Balthzar client now remembers the size of the window so the next time you open the client it will open in the same size.
749	2018-04-16	eTouch	16.1.65 - Loadbalancing	JB
			As of this version, a simple loadbalancingfeature is implemented in eTouch, which makes it possible to setup up to two alternative webservice-adresses, and thereby two different application pools, for eTouch to use. The switch between these adresses are determined by measuring their responsetime once every three minutes, always prioritizing the fastest.
748	2018-04-16	Client	16.1.65 - Internal activities history	pj
			It is now possible to reach Internal activity history from the overview parts 2 and from production order in the standard overview. It is also possible to open the checklist and review input data and attached documents.
746	2018-04-10	Client	16.1.64 - Dashboard startup	pj
			Edited the Startup of balthzar Dashboard to go smoother.
745	2018-04-06	eTouch	16.1.64 - Showing uncancelled orders, SF196	JB
			A new special function has been added that makes it possible to show only uncancelled historical orders in Recent orders. When active, an icon is shown in the upper right corner of the form, signifying which type of data is shown, either only uncancelled, of both.
744	2018-04-06	eTouch	16.1.64 - Materialbundle, SF166	JB
			When using Pyramid and the special function 166 (Materialbundle), problems could arise when loading materials at workorder start resulting in a empty list. In an effort to resolve this, a question is presented when the material menubutton is pressed in eTouch, and no materials are loaded, giving the operator an opportunity to manually order a materiallist reload.
743	2018-04-03	eTouch	16.1.63 - Suggested signature on palletflag(SF178)	JB
			If only one person is signed in in eTouch, that persons signature is suggested when printing palletflags in eTouch, when SF178 is active.
742	2018-03-29	eTouch	16.1.63 - New SF (194) Warning, missing parttype	JB
			A new special function has been added that displays a warning if a started order is missing its parttype-value. The warning is only informational, and wont stop the orderstart if shown.
739	2018-03-27	Scheduler	16.1.63 - Scheduled reports to printer	JH
			Adjusted problem where a scheduled report would not be printed.
740	2018-03-27	Client	16.1.63 - Performance in Internal Activities	JH
			Several performance improvements have been implemented in the form used to perform Internal Activities.
741	2018-03-27	Client	16.1.63 - Internal Activity and tools	JH
			Adjusted problem with starting a manual activity with a tool id containing :.
738	2018-03-26	Client	16.1.63 - Scrap reason color	pj
			It is now possible to assign color to scrap reason. This is to be able to get the same color for the same scrap reason everytime a report is generated. The reports History scrap pivot/graph and scrap pivot/graph are the reports currently affected by this.
737	2018-03-26	Client	16.1.63 - Production report	pj
			The production report have not previously handled manualy reported values. This is now updated to correctly show data even if manual reports are made.
736	2018-03-22	eTouch	16.1.63 - eTouch pie-chart in minutes	JB
			A new specialfunction (193) has been added that makes it possible to show the piechart displaying stopreasons in eTouch, in minutes instead of the default, hundreths of hours.
734	2018-03-20	Client	16.1.62 - Log on other value	JH
			When logging process values it is possible to control the logging of one value to only log when another value changes.
735	2018-03-20	eTouch	16.1.62 - Planned orders, Placell	JB
			Customerspecific adjustment hiding operation 10 from planned orderslist in eTouch are now active for Placell, as intended.
731	2018-03-19	Client	16.1.62 - Dashboard screenshot	pj
			It is possible to make the dashboard take a screenshot of itself every time that it changes layer. It is possible to select where the screenshot should be saved.
732	2018-03-19	Client	16.1.62 - Report process logging	pj
			The report process logging can now take in text fields into the grid. Text fields will not be shown in the graph.
733	2018-03-19	Client	16.1.62 - Dashboard settings.	pj
			It is no longer possible to move dashboard objects when not in edit mode. The dashboard instead scales to look like the creator of the dashboard intended.
730	2018-03-15	eTouch	16.1.62 - Planned orders, Pyramid	JB
			When using connectiontype 3 (Pyramid), running orders were previously shown in the planned orders list in both eTouch and Client, which was not intended. That is now fixed.
729	2018-03-13	eTouch	16.1.62 - Prevent overreporting by percentage	JB
			A new specialfunction has been added (192) which enables a message preventing further manual reporting in eTouch if reported quantity exceeds the planned quantity plus a set percentual limit. Reporting is prevented in this way if reporting is made in eTouch by report quantity and printing of palletflags.
728	2018-03-09	Client	16.1.61 - Machinenotes	JB
			In Clients standard overview, righclicking a row presents a function where 1 to 5 texts can be set on each machine. Right now, these text will remain until replaced, however in upcoming versions of Balthzar, it will be possible to attach an event which will erase these texts, as they occur. These events will be predetermined, an are right now : NEW_DAY = New day occurs, taking daybreak setting on the machine into account SHIFT_CHANGE = Shift is changed WO_START = Workorder start WO_END = Workorder ended NONE = No event will clear this text
726	2018-03-06	Client	16.1.60 - Displaying logged in user	JB
			In Client, a text in the lower part of the form shows which user is logged in. This is particularly useful when using the domain login feature where the user is logged on automatically, and multiple users are switched between.
727	2018-03-06	Client	16.1.60 - New report, SQL - excel	pj
			A new report has been made called SQL Excel. This report takes up to 5 sql queries and puts the data generated into and excel workbook.
725	2018-03-05	Client	16.1.60 - Dashboard changes	pj
			The dashboard has gotten a few changes and fixes. Settings for the text color field in the Text object have been changed to work as intended. Own object now handles a uses color field from dataset if that is available, else color from settings. Own value object now handles text to, if text is entered the default color will be used if no color field exists in dataset. The graph object now handles color. The color will be linked to the first column in the retreived dataset.
724	2018-02-28	Client	16.1.60 - Domain-login	JB
			An additional field has been added to the Admin section of Users where domainuser can be specified. If used, and matching logged in domainuser in Windows, an automatic login is performed when Balthzar Client is started. If not matching (or empty) the standard login form is shown. If logging out from Client, the login form is shown, making it possible to switch users, despite the auotologin feature.
723	2018-02-28	Scheduler	16.1.60 - Schedule to printer	JH
			It is now possible to Schedule a report directly to a printer in balthzar. Please note that the printer must be installed on the balthzar server.
720	2018-02-26	Client	16.1.59 - Automatic document scanning	JH
			Input type Automatic document scanning in Internal Activities now supports PDF and DOC files.
721	2018-02-26	Client	16.1.59 - Min/Max change for processvalue counter	JH
			When using one of the processvalue counters it is now possible to set the min/max allowed change in counter value.
722	2018-02-26	Client	16.1.59 - Heartbeat in processvalue	JH
			It is possible to register a processvalue as a heartbeat. In short, this means that if the signal stop changing connection to the data source is lost.
719	2018-02-23	Client	16.1.59 - Transactions per hour	JH
			Fixed problem where transactions per hour would jump to the wrong previous day.
718	2018-02-22	eTouch	16.1.59 - Reporting from running orders	JB
			Now, reporting of quantity (both scrap and good) can be performed from the form Running orders, which earlier was disabled. Viewing of documents attached to running orders can now also be done from this form.
717	2018-02-20	eTouch	16.1.59 - New SF (190) Adjust qty at WO-finish	JB
			A new special function has been added that makes an automated good quantity reporting when ending order, after the operator entered the number of good quantity on last pallet. Reported quantity is reported as negative good quantity.
716	2018-02-20	Scheduler	16.1.59 - Scheduled reports and language	JH
			A report scheduled in Balthzar will now be created using the language of the person creating the Schedule.
715	2018-02-19	Status	16.1.58 - Automatic start of order	JH
			When using automatic start of work order all automatic print jobs will be printed.
713	2018-02-19	eTouch	16.1.58 - SF191 Alternative documentviewing	JB
			A new special function (191) has been added which replaces the standard functionality in eTouch were documents are shown in the internal viewer. If a document cannot be shown in the associated program, a question is asked if the user wants to open it in the standard, internal, viewer.
714	2018-02-19	eTouch	16.1.58 - New SF, Shiftstatistics	JB
			A new specialfunction has been added (188) that makes it possible to view OEE-data per shift in eTouchs Workorder page. The replaced numbers are EE% today, and OEE% today, which will show their shift-counterparts instead. In order to conform to this type of data, cycles today are shown as Cycles shift, even if it isnt related to OEE-numbers.
712	2018-02-16	eTouch	16.1.58 - Documents from historical orders	JB
			Added functionality to view attached documents from historical orders.
710	2018-02-16	Client	16.1.58 - Report headers	pj
			Added the ability to put a timestamp in the header for when a report was generated
711	2018-02-16	Client	16.1.58 - Report time span	pj
			There are 15 new timespans to select from. Last 4 hours Last 8 hours Last 24 hours Last 48 hours Last 7 days (with and without adjusting the clock) Last 14 days (with and without adjusting the clock) Last 30 days (with and without adjusting the clock) Last 60 days (with and without adjusting the clock) Last 3 months Last 6 months Last 12 months
709	2018-02-15	eTouch	16.1.58 - New SF, New revisioninformation	JB
			A new specialfunction has been added (189) which alerts the operator via a messagebox in eTouch after workorderstart, that a new revision is used, if that is the case. This information will only appear when revision differs from the one last used for the same operation and partnumber.
707	2018-02-09	eTouch	16.1.57 - Multiple selection, historical orders	JB
			In eTouch, multiple orders can now be selected for cancellation, or reverting cancellation. Reporting of quantities (scrap and good) and palletflag printing are prevented if more than one row is marked in this grid. The form has been slightly changed in order to minimize the amount of user interaction.
708	2018-02-09	Client	16.1.57 - Automatic document scanning	JH
			A new input type, automatic document scanning, is now available for checklists in Internal Activity. It allows the activity to scan a folder after a file using a certain pattern and bind it to the activity when it is created.
705	2018-02-09	eTouch	16.1.57 - Viewing of documents in eTouch	JB
			The listing of documents were not working as intended in previous version when using document_type 1 (basefolders). This should be fixed now.
706	2018-02-09	eTouch	16.1.57 - Revert cancellation	JB
			In this version of eTouch, cancellations can be reverted in Balthzar. Keep in mind that this might not affect the ERP system used.
704	2018-02-09	Client	16.1.57 - Amount of activities	JH
			The button for Internal Activities in Balthzar Client will now display the amount of open activities for the current Balthzar user.
703	2018-02-08	Scheduler	16.1.57 - Tool status in activity events	JH
			It is now possible to use tool status as a condition when creating activities using start- and stop work order events.
702	2018-02-05	eTouch	16.1.56 - SF187, autocreate tools	JB
			A new special function has been added, that automatically creates a template-tool when starting an order, if the tool is missing in the Balthzar database.
701	2018-02-02	eTouch	16.1.56 - ToolID from Monitor	JB
			When directconnected to the Monitor ERP system from a machine, a single toolID will be used on the workorder, if one or more tools are configured to be used on the operation in Monitor.
700	2018-02-01	Client	16.1.56 - Accumulative positive counter	JH
			A process value can now be subscribed to as an accumulative positive counter. This works like the Positive counter, but instead of using the difference the sum of all differences will be used.
699	2018-02-01	eTouch	16.1.56 - Signing in, in eTouch	JB
			The Sign in-function in eTouch was previously not handling the various combinations of erp-system and connectiontype as intended, which now has been handled. Supported combinations are Monitor with connectiontype 0 or 1, and any other erp_system with connectiontype 0 (Balthzar-verification).
696	2018-01-31	Client	16.1.56 - Process value from UDP	JH
			It is now possible to create process values from an UDP-stream on port 5180.
697	2018-01-31	Client	16.1.56 - Process value counters	JH
			It is now possible to use a process value as a counter. I.e., the change in value is used instead of the actual value.
698	2018-01-31	Client	16.1.56 - Scrap many using process value	JH
			It is now possible to scrap the amount given in a process value.
695	2018-01-30	Status	16.1.56 - Performance focus	JB
			At some heavy load customers, systemperformance have not been justifiably reflected by the hardware used, and certain actions have been taken addressing this. Results of these efforts are under evaluation.
694	2018-01-29	eTouch	16.1.55 - Fixed SF166 data-entry issue	JB
			A comma/dot-mismatch-issue when assigning quanities with decimals have been fixed.
692	2018-01-29	eTouch	16.1.55 - Special function 64	JB
			Specialfunction 64 accidently got de-activated in the previous version, now it has returned in its original form.
691	2018-01-24	Client	16.1.55 - Event and restart work order	JH
			Restarting a work order will no longer generate Start and stop work order events.
689	2018-01-19	Client	16.1.55 - Multiple conditions in checklist	JH
			Checklists in internal activities supports multiple conditions.
690	2018-01-19	Client	16.1.55 - Background SQL	JB
			Some frequently used functions of Balthzar have been identified where SQL is not needed to be executed directly. These functions have now received a background execution routine which hopefully will increase the experienced performance of Balthzar Client. This type of execution will from now on be used whenever suitable.
688	2018-01-18	Client	16.1.55 - New userdefined pivot-graph	JB
			A new generic SQL report has been added that makes it possible to generate a report from a custom SQL-query, called SQL Pivot graph.
687	2018-01-17	eTouch	16.1.55 - Re-worked document handling, eTouch	JB
			As of this version, customers with the base-folder-setup in eTouch now have the ability to use subfolders to a given base-folder, in order to organize documents related to the combination of basefolder and machine/part/operation. See documentation for further details. Old functionality is untouched.
684	2018-01-15	Client	16.1.54 - Component upgrade	JB
			Balthzar uses a suite of thirdparty components which, as of version 16.1.54 has been upgraded. Small graphical changes are signs of this, as is (hopefully) some performance improvements, primarily when running reports with massive amounts of data.
685	2018-01-15	eTouch	16.1.54 - Special function 174	JB
			Special function 174 now has extended functionality, displaying more variations of toolstatus in the planned orders list of eTouch.
683	2018-01-12	Ststus	16.1.54 - My cycles from C2	JH
			Counter 2 can be used as counter for my cycles on Machines.
682	2018-01-11	eTouch	16.1.54 - Order fully reported	JH
			Adjusted a problem which could occur if the function to calculate if the order was fully reported was called using a decimal number.
680	2018-01-11	eTouch	16.1.54 - Issues with pallet flag	JH
			Resolved issue where pallet flag was printed on the wrong work order when using historical orders.
681	2018-01-11	eTouch	16.1.54 - SF123: Scrap in KG	JH
			Clarified that when this special function is active the reporting of produced quantity is done in weight (KG).
679	2018-01-11	eTouch	16.1.54 Issue with the swedish �-character	JB
			In eTouch, the letter � could not be entered via the onscreen keyboard when assigning employee signature, which is now fixed.
678	2018-01-09	Client	16.1.54 - Test standard	JH
			Changed some tests to a new test standard. This update is specific to a customer.
675	2018-01-09	eTouch	16.1.53 - SF183	JB
			When using special function 183, the assignment of tool_id and its corresponding cavity reduction when starting an order wasnt made as intended, which now is fixed.
676	2018-01-09	eTouch	16.1.53 - Opening cavities	JB
			Problems have occurred for customers using the : character in their description of cavities. This have been corrected.
677	2018-01-09	Client	16.1.54 - Update stop reason	JH
			Improved functionality when updating stop reason on several stops at once
673	2018-01-08	Client	--- General announcement ---	JB
			As of version 16.1.53, all documentation in this development-log will be written in english, to better serve our non swedish speaking customers. Unfortunatly, we wont update old entries, but we will gladly answer any questions either by mail or phone. We apologize for the inconvinience, and hope to provide a more including user experience. Delacroy
674	2018-01-07	Client	--- Allm�nt meddelande ---	JB
			Fr�n och med version 16.1.53 kommer all dokumentation i denna utvecklingslogg att endast skrivas p� engelska, f�r att b�ttre m�ta v�ra icke svensktalande kunder. Vi kommer inte att �vers�tta gamla inl�gg, men vi kommer heller inte att skapa n�gra nya p� svenska. St�ller detta till problem f�r Er, s� finns vi tillg�ngliga p� mail och telefon som vanligt. Vi beklagar eventuella problem som uppkommer p� grund av detta, men hoppas samtidigt p� detta s�tt kunna tillhandah�lla en mer inkluderande tj�nst. Med v�nlig h�lsning Delacroy
672	2018-01-02	Client	16.1.52 - Dokumentskanning i Interna Aktiviteter	JH
			I en checklista f�r Interna Aktiviteter kan man nu v�lja att skanna dokument som input typ.
671	2017-12-20	Client	16.1.52 - Larmhantering i client	pj
			I client kan man nu kvittera larm som kommer in p� maskiner. F�r att g�ra detta m�ste man ha st�llt in att man vill kunna kvittera larm p� sin anv�ndare (admin -> anv�ndare). Man m�ste dessutom v�lja vilka larm som man ska se som anv�ndare i amdin -larm per anv�ndare.
670	2017-12-19	eTouch	16.1.52 - Tool_id p� startad order	JB
			Verktyg (tool_id) hanterades inte korrekt p� startade ordrar i f�reg�ende version (16.1.51) om man anv�nde sig av MPS typ = 0, n�got som nu �r justerat.
669	2017-12-15	Client	16.1.51 - Processloggning och kvalitet i CSV	JH
			N�r man h�mtar processv�rden fr�n en CSV-fil kan man ange ett f�lt i filen som avg�r om v�rdet ska f� kvalitet kasserad.
667	2017-12-14	Client	16.1.51 - OPC-Connector och alternativ databas	JH
			N�r man s�tter upp OPC-Connector kan man nu ange alternativ "Connection string" ist�llet f�r den som anv�nds som standard.
668	2017-12-14	Client	16.1.51 - Interna Aktiviteter och blank PDF	JH
			�tg�rdat problem som gjorde att PDF i checklistan f�r interna aktiviteter ibland var blank.
666	2017-12-12	Client	16.1.51 - Anslagstavlan, ny objekttyp	PJ
			Anslagstavlan har nu en ny objekttyp som man kan l�gga till, �versikt. Detta �r ett tabell som inneh�ller �versikten som annars finns i klienten.
665	2017-12-12	Client	16.1.51 - Anslagstavlan Inst�llningar	pj
			Inst�llningsf�nstret i anslagstavlan har omarbetats f�r att bli mer l�ttanv�nt.
663	2017-12-11	Client	16.1.51 - Smartguide och order klar	JH
			N�r en order k�rts i Smart Guide m�ste man manuellt kvittera att ordern �r klar. (Kundanpassning)
664	2017-12-11	Client	16.1.51 - Anslagstavlan, tunna klienter	pj
			Anslagstavlan g�r nu att k�ra i tunna klienter.
662	2017-12-11	Client	16.1.51 - Watchdog och anslagstavlan	pj
			Balthzar watchdog kan nu h�lla kolla p� anslagstavlan och starta om den st�ngs av eller kraschar.
661	2017-12-08	Ststus	16.1.51 - Forcera nytt skift vid dygnsbryt	JH
			Man kan nu v�lja att forcera nytt skift vid dygnsbryt. Det inneb�r att skiftet "b�rjar om" n�r dagen b�rjar.
659	2017-12-07	eTouch	16.1.51 - Specialfunktion 64	JH
			Om man har specialfunktion 64 aktiverat kommer eTouch ej l�ngre fr�ga om man ska ta bort ordern ur planeringen. Detta kommer ske automatiskt.
660	2017-12-07	ERP	16.1.51 - Export till pyramid och IFW-filer	JH
			N�r data exporteras till Pyramid kan s� kallade IFW-filer skapas. Detta hanteras nu vid export.
657	2017-12-06	Client	16.1.50 - Justering IA, checklista	JH
			Checklistan i Interna aktiviteter har justerats s� att v�rden som anges numera sparas korrekt.
658	2017-12-06	Client	16.1.50 - CSV-filer som processv�rden	JH
			Balthzar har nu st�d f�r att anv�nda CSV-filer som k�lla f�r processv�rden.
656	2017-12-05	Client	16.1.49 - Smart Guide och visning av PDF	JH
			N�r instruktionen VIEW PDF_PAGE k�rs visas nu korrekt sida.
648	2017-12-04	Client	16.1.49 - Admin maskiner	Pj
			I administrationen av maskiner kan man nu aktivera automatkassation, s�tta kassationskod och s�tta omr�kningsfaktor f�r C4.
653	2017-12-04	Client	16.1.49 - Urval av order f�r certifikat	jh
			Korrigerat s� att man nu hittar tillverkningsordrar som k�rts ist�llet f�r de som startats under det valda tidsintervallet n�r man s�ker efter ordrar f�r kvalitetscertifikat. (Specialanpassning)
654	2017-12-04	eTouch	16.1.49 - Uppr�kning verktyg via SF183	JB
			Uppr�kning av verktyg via SF183 �r justerad till att b�ttre st�mma �verens med dess ursprungliga tanke. Se dokumentation f�r utf�rligare beskrivning.
647	2017-12-04	Client	16.1.49 - Smart Guide skrivning av lampor	JH
			Balthzar Smart Guide kommer nu att verifiera att OPC-lampor t�nds n�r en SET OPC instruktion anv�nds.
651	2017-12-04	Client	16.1.49 - Korrigerat decimaler i certifikat	JH
			Resultatet av f�rn�tningstest kommer att visas utan decimaler i kvalitetscertifikat. (Specialanpassning f�r kund)
652	2017-12-04	Client	16.1.46 - Processv�rde och ODBC	JH
			Man kan nu ange en generisk Windows ODBC-k�lla som ett processv�rde.
655	2017-12-04	Client	16.1.49 - Smart guide och OPC	JH
			Om en skrivning misslyckas efter ett antal f�rs�k kommer anv�ndaren meddelas.
649	2017-12-04	Client	16.1.49 - Checklista och utr�knat cellv�rde	JH
			Korrigerat hur radstatusen s�tts n�r man anv�nder sig av en checklista i Interna Aktiviteter som ber�knar standardv�rde.
650	2017-12-04	Client	16.1.49 - Avvikelse och test�versikt	JH
			Om en avvikelse uppst�r i ett test kommer raden gulmarkeras i test�versikten. (Specialanpassning f�r kund)
646	2017-11-29	Client	16.1.49 - Flera r�knare p� maskin	JH
			Om man k�r med flera maskinr�knare kommer maskinen nu f� r�tt k�rstatus �ven om r�knare 1 inte k�r.
640	2017-11-28	Client	16.1.48 - Skalning Anslagstavla	PJ
			Objekten i anslagstavlan skalas nu med f�nstret om man inte �r inne i administrationsl�get. Detta f�r att beh�lla samma utseende p� anslagstavlan ovasett vilken sk�rmstorlek man har.
644	2017-11-28	Client	16.1.49 - Samma recept p� flera maskiner	JH
			Man kan nu registrera samma recept p� flera olika maskiner.
645	2017-11-28	eTouch	16.1.49 - Automatisk start/stopp av order	JH
			En ny specialfunktion 186 finns nu. Om denna �r aktiverad p� en maskin s� kommer planerade ordrar automatiskt att startas och stoppas utifr�n planerad k�rtid.
641	2017-11-28	Client	16.1.48 - F�rflytta objekt, anslagstavla	PJ
			I anslagstavlan kan man nu f�rflytta objekt genom att h�lla nere musknappen och dra runt objekten.
643	2017-11-28	Client	16.1.48 - Anslagstavla, negativa gr�nsv�rden.	PJ
			Man kan nu s�tta negativa v�rden p� �vre/under gr�nsv�rden.
642	2017-11-28	Client	16.1.48 - Anslagstavla - eget v�rde	PJ
			Objektet Eget v�rde har f�tt tv� nya inst�llningar; Visa kant som anv�nds f�r att v�lja om man vill ha en kant runt objektet eller inte och teckenfont/storlek f�r v�rdet, om man inte vill att det ska vara samma som �verskriften kan man s�ledes �ndra det.
639	2017-11-24	eTouch	16.1.48 - Kodning av historiska stopp	JH
			N�r man i eTouch kodar historiska stopp kan man nu klicka p� Stopporsaks-knappen till v�nster och Pennan till h�ger f�r att redigera stoppet.
638	2017-11-23	eTouch	16.1.48 - SF170, justering i rapporterat antal	JB
			Formeln f�r vilket antal som ska rapporteras var tidigare felaktig, vilket nu �r r�ttat.
637	2017-11-20	ERP	16.1.47 - FireDaemon/Balthzar_ERP	JB
			N�r FireDaemon anv�nds f�r att �vervaka Balthzar_ERP kunde omstarter g�ras som inte helt och h�llet lyckades, och i vissa fall resulterade i programh�ngning. Ett s�dant fall �r nu �tg�rdat.
636	2017-11-16	eTouch	16.1.47 - Rapportering av decimaltal i eTouch	JB
			Om man anv�nder Max manuellt antal p� en maskin i eTouch, s� varnade denna funktion tidigare p� decimaltal som borde varit godk�nda. Det �r nu r�ttat.
635	2017-11-09	Client	16.1.45 - �ndring av funktionen Tillverkningsorder	PJ
			Menyvalet Tillverkningsorder i Balthzar Client hade i f�rra versionen ett problem som gjorde det sv�rt att anv�nda funktionen, samt dess tillh�rande undermeny. Det �r nu r�ttat.
631	2017-11-07	eTouch	16.1.44 - Specialfunktion 184	JH
			En ny special funktion 184 finns tillg�nglig. Med denna kan man starta en order via rapportnummer.
634	2017-11-07	Client	16.1.44 Artiklar med artikeltyp.	pj
			Man kan nu ge en artikel en artikeltyp i Admin-f�nstret.
632	2017-11-07	Client	16.1.44 Anslagstavla, nya objekt	PJ
			Anslagstavlan har f�tt 2 nya objekt, det f�rsta �r ett objekt som kallas f�r eget v�rde d�r en �verskrift och en siffra visas. Bakgrundsf�rgen p� detta objekt kan varieras beroende p� siffrans v�rde. Det andra �r ett objekt som kallas f�r Text fr�n sql. Detta objektet visar en text som kan uppdateras fr�n en sql.
633	2017-11-07	Client	16.1.44 Egen ordertext	PJ
			Under tillverkningsordrar i Client kan man nu s�tta en ordertext och en prioritet p� plannerade ordrar. Dessa b�da v�rdena kan man dessutom visa i �versikten.
629	2017-11-07	eTouch	16.1.44 - Historiska ordrar	JH
			Fr�n och med denna version ska avslutade tillverkningsordrar dyka upp i historiska ordrar direkt efter avslut.
630	2017-11-07	eTouch	16.1.44 - Manuellrapportering	JH
			Ett problem som kunde uppst� med manuellrapportering d�r rapporteringen kom till fel order �r �tg�rdat.
627	2017-10-26	Client	16.1.44 - Uppdatera stopporsaker	JH
			Vi har gjort en prestanda f�rb�ttring d� man uppdaterar stopporsaker i klienten.
628	2017-10-26	Client	16.1.44 - Maskinprioritet i Interna Aktiviteter	JH
			Man kan nu se maskinprioritet i Interna Aktiviteter.
625	2017-10-20	Client	16.1.43 - Interna Aktiviteter och servicer�knare	JH
			N�r man utf�r en aktivitet utan checklista som kommer att nollst�lla en servicer�knare kommer man nu f� en varning.
626	2017-10-20	Client	16.1.43 - Val av interna aktiviteter	JH
			Vi har nu aktiverat ytterligare funktioner i tabellen �ver �ppna interna aktiviteter. Man kan nu t.ex. �ndra format och l�gga till s� kallade "Conditional formatting". Detta kan i vissa fall g�ra gamla layouter ogiltliga, och man f�r d� ta bort layouten och skapa en ny.
624	2017-10-19	eTouch	16.1.43 - Visning av planerad ordrar eTouch	JB
			En bugg som gjorde visningen av planerade ordrar felaktigt n�r storleken p� programmet skiljde sig fr�n standard, �r �tg�rdad.
623	2017-10-19	Client	16.1.43 - Makulering av Interna Aktiviteter	JH
			N�r en intern aktivitet makuleras s�tts nu �garen till den person som �r inst�mplad p� maskinen. Om ingen �r inst�mplad s�tts ingen �gare.
622	2017-10-18	eTouch	16.1.43 - Kassationsstatistik SF179	JB
			Diagrammet f�r kassationsstatistiken i eTouch tar nu h�nsyn till om specialfunktionen 179 (Prima antal i alt. enhet) �r aktiverad.
620	2017-10-06	Client	16.1.41 - Interna Aktiviter och servicer�knare	JH
			Nu kan man visa servicer�knaren i procent n�r man utf�r verktygsservice med interna aktiviteter.
619	2017-10-03	Client	16.1.40 - PDF och checklista	JH
			Om man �ndrar i en PDF och laddar upp den igen s� kommer nu den anv�ndas i nya Interna Aktiviteter som redan har den �ldre versionen.
618	2017-09-28	Client	16.1.40 - Detaljerad information i I.A	JH
			N�r man utf�r checklistan till en Intern Aktivitet kan man nu f� upp ett f�nster d�r detaljerad information kring tillverkningsordern som h�r till aktiviteten visas.
616	2017-09-27	Client	16.1.40 - Anslagstavla bakgrund	PJ
			Man kan nu s�tta bakgrundsf�rg/bakgrundsbild p� anslagstavlan.
615	2017-09-27	Client	16.1.39 - Anslagstavla opc-objekt	pj
			Tv� nya objekt har lagts till i anslagstavlan, OPC-r�knare och OPC-m�tare. Dom fungerar som deras vanliga motparter (m�tare och r�knare) men ist�llet f�r en sql-fr�ga s� v�ljer man ett opc-v�rde att visa.
614	2017-09-25	eTouch	16.1.39 - Bemanningsfaktor	JB
			N�r specialfunktionen Ange bemanningsfaktor anv�ndes, och anv�ndaren valde att avbryta, s� gjordes Starta Order-knappen otillg�nglig. Det �r nu justerat.
613	2017-09-25	Client	16.1.39 - Avslutad pausade ordrar i Smart Guide	JH
			Man kan nu avsluta pausade ordrar i Smart Guide utan att f�rst starta dem.
612	2017-09-22	eTouch	16.1.39 - SF99, visning av material	JB
			N�r specialfunktion 99 anv�nds kunde man tidigare inte se material p� de planerade ordrar som visas, vilket nu �r korrigerat.
611	2017-09-22	Client	16.1.39 - Variable checklistor	JH
			N�r man skapar en checklista till en aktivitet kan man v�lja att vissa rader endast �r med om vissa villkor uppfylls. Just nu har vi st�d f�r maskin, artikel, artikeltyp, verktyg och operation som villkor.
610	2017-09-21	eTouch	16.1.39 - SF5 / SF83 - �ndring	JB
			Om SF5 (Starta order via artikel) anv�nds i kombination med SF83 (Ange ordernummer vid start via artikel) s� tilldelas fr�n och med denna version inga nya rapportnummer p� redan startade ordrar, andra g�ngen dessa startas, utan det gamla rapportnumret �teranv�nds.
609	2017-09-21	eTouch	16.1.39 - Textl�ngd, pluggningshantering	JB
			N�r kaviteter �ppnas/st�ngs kan text anges som orsak. Denna text �r nu lika l�ng p� b�da st�llen, 50 tecken.
607	2017-09-20	eTouch	16.1.39 - Justering SF58	JB
			Specialfunktion 58 tog tidigare inte h�nsyn till antalet insatser p� r�tt s�tt, vilket gav felaktiga v�rden vid ber�kning av procentuellt f�rdigst�llande av order. Detta �r nu r�ttat.
608	2017-09-20	eTouch	16.1.39 - Planerad order dr�jer sig kvar	JB
			Tidigare om man i eTouch endast hade en order i listan �ver planerade ordrar, och startar denna, s� l�g den kvar som planerad �ven efter starten. Det �r nu korrigerat.
604	2017-09-18	Client	16.1.38 - SQL-V�rde som processv�rde	JH
			Man kan nu anv�nda b�de SQL-V�rde och OPC-V�rde som ett process v�rde i balthzar.
605	2017-09-18	Client	16.1.38 - Larmhantering	JH
			Man kan nu v�lja att skapa ett larm beroende p� om tv� process v�rden �r lika eller inte.
606	2017-09-18	Client	16.1.38 - Process v�rde och Larm	JH
			Man kan nu v�lja att skriva till ett processv�rde n�r ett larm s�tts och sl�cks.
602	2017-09-13	eTouch	16.1.38 - Visning av tid f�r p�g�ende stopporsak	JB
			Under vissa omst�ndigheter kunde tid visas i eTouch f�r p�g�ende stopporsak som negativt f�rfluten tid. Ett av dessa fall �r identifierat och �tg�rdat.
603	2017-09-13	eTouch	16.1.38 - Inst�mpling utan Monitor	JB
			Tidigare fungerade endast inst�mplingsfunktionen i eTouch d� Monitor anv�ndes. Nu kan �ven verifiering g�ras mot Balthzar internt, mot upplagda anv�ndare, f�r de som inte k�r Monitor som aff�rssystem.
600	2017-09-12	eTouch	16.1.38 - P�g�ende ordrar visas fel vid v�xling	JB
			N�r man i eTouch v�xlar mellan en maskin med en eller fler ordrar till en maskin som inte har n�gon startad order, l�g tidigare f�reg�ende maskins ordrar som p�g�ende p� den maskin man v�xlat till. Det �r nu �tg�rdat.
599	2017-09-11	eTouch	16.1.37 - Justering SF14	JB
			N�r SF14 anv�nds varnas operat�ren om artikeln som k�rs saknar EAN-kod, genom normala varningsfunktionen.
601	2017-09-10	eTouch	16.1.37 - Till�gg SF14	JB
			N�r SF14 anv�nds, ges numera en varning via eTouchs standards�tt att visa varningar, om p�g�ende orders artikel saknar EAN-kod.
597	2017-09-08	eTouch	16.1.37 - Ny SF (180) cykelfaktor vid orderstart	JB
			En ny specialfunktion har tillkommmit som tvingar anv�ndaren att ange en cykelfaktor vid orderstart.
598	2017-09-08	eTouch	16.1.37 - Justering SF80	JB
			SF80 visade inte r�tt data d� kassationsstatistiken i eTouch anv�ndes tidigare, vilket nu �r �tg�rdat.
595	2017-09-07	eTouch	16.1.37 - Ny SF (178), signatur p� st�mplingar	JB
			En ny specialfunktion har tillkommit som g�r det m�jligt att slippa ange anst�lld i de l�gen d�r detta efterfr�gas i eTouch, givet att endast en person �r inst�mplad. Dennes signatur anv�nds d� automatiskt.
596	2017-09-07	eTouch	16.1.37 Ny SF (179) Prima antal i alternativ enhet	JB
			En ny specialfunktion har tillkommit som g�r det m�jligt att se antal i Tillverkningsorderbilden i alternativ enhet.
594	2017-09-05	eTouch	16.1.37 - SF14, EAN-kod	JB
			Vid anv�ndning av SF14 EAN-kodsverifiering, s� fungerade menyalternativet f�r verifiering inte som det var t�nkt, vilket nu �r �tg�rdat. Eventuell feltext �r �ven f�rtydligad i de fall s�dan �r befogad.
593	2017-09-05	eTouch	16.1.36 - Kvittera stopp, eTouch	JB
			N�r Kvittera stopp-rutan visades i eTouch, kunde man i vissa fall inte komma till r�tt sk�rmbild, d�r stopporsak v�ljs. Det �r nu �tg�rdat.
592	2017-09-04	eTouch	16.1.36 - Planeringslistan eTouch	JB
			N�r man bytte maskin i eTouch fr�n en maskin med planerade ordrar till en maskin utan planerade ordrar, l�g den gamla maskinens ordrar i vissa l�gen kvar i listan. Det �r nu r�ttat.
589	2017-09-01	eTouch	16.1.36 - Felplacerade ikoner	JB
			I eTouch hade ikonen med papper felaktig placering i formul�ret f�r historiska kassationer, vilket nu �r r�ttat.
591	2017-09-01	eTouch	16.1.36 - Statistik stopporsak eTouch	JB
			Statistiken f�r stopporsaker idag tog tidigare midnatt som start f�r sin k�rtidsber�kning, vilket nu �r �ndrat till tid f�r angivet dygnsbryt.
590	2017-09-01	eTouch	16.1.36 - Verktygslistan i eTouch, SF145	JB
			Verktygslistan har ut�kat sina valbara kolumner till att inneh�lla mer information om verktyg som visas, inklusive fritextkommentar fr�n Monitor.
588	2017-08-30	Client	16.1.35 - Anslagstavla ny objekttyp	PJ
			En ny Objekttyp har lagts till i Anslagstavlan, Maskinstatus. H�r kan man se om en maskin k�rs eller st�r still och om den har ett bra TAK-v�rde. Om maskinen st�r still kan man ocks� se vilken stopporsak som �r vald.
586	2017-08-28	Client	16.1.35 - Lager i anslagstavlan	PJ
			I Anslagstavlan kan man nu l�gga till flera lager. Man kan sedan l�gga till olika objekt i varje lager. Anslagstavlan v�xlar sedan vilket lager den visar med ett angivet tidsintervall.
585	2017-08-28	Client	16.1.35 - Stopporsaksgrupper i klienten	PJ
			Man kan nu f� fram grafer �ver stopporsaksgrupper i klienten, likt stopporsaksgraferna man har kunnat ta fram innan. �n s� l�nge finns enbart grafer f�r stopporsaksgrupper per maskin.
587	2017-08-28	eTouch	16.1.35 - Ut�kning SF90	JB
			Specialfunktion 90 har ut�kats till att �ven tilldela verktygsnummer i ett nytt f�lt f�r detta �ndam�l.
584	2017-08-24	Ststus	16.1.35 - Varning via mail	JB
			Om Balthzar_status av n�gon anledning ligger mer �n 4 timmar efter i sin bearbetning av poster, skickas numera ett mail till systemanv�ndare som varnar om detta. Mailet skickas en g�ng per timme, tills problemet �r l�st.
582	2017-08-23	eTouch	16.1.35 - Panorering i PDF-dokument	JB
			Stegvis panorering i eTouchs visning av PDF dokument via enskilda klick har nu lagts till. (Tidigare kunde man endast rulla dokumentet genom att h�lla inne knapparna.)
583	2017-08-23	eTouch	16.1.35 - K�-varning Balthzar ERP	JB
			Om k�n med transaktioner som Balthzar ERP bearbetar blir f�r l�ng (>50 poster), s� f�r numera automatiskt anv�ndare med mailadress och flaggan f�r systemmeddelanden, ett mail som informerar om detta. Kontrollen g�rs en g�ng var fj�rde timme, om ej manuellt initierat.
581	2017-08-22	Client	16.1.35 - 300 och 600 sekunders loggintervall	JH
			Man kan nu v�lja att logga processv�rden med 300 och 600 sekunders intervall
579	2017-08-17	eTouch	16.1.34 SF175 - Bemanningsfaktor	JB
			Denna specialfunktion har ut�kats till att �ven ha ett menyalternativ d�r bemanningsfaktor kan anges p� p�g�ende order, som d� startas om.
580	2017-08-17	eTouch	16.1.34 - Materialkassationer eTouch, ej Monitor	JB
			Ett nytt gr�nssnitt f�r att rapportera kassation fr�n eTouch har tagits fram f�r det kunder som ej k�r Monitor.
578	2017-08-16	eTouch	16.1.34 - Mindre gr�nssnitts�ndringar eTouch	JB
			I eTouch visas v�rden p� Tillverknigsorder-bilden felaktigt p� operativsystem vars visning inte st�djer genomskinlighet, exempelvis Windows Server 2008 R2. En justering f�r att hantera detta �r nu gjord. Varningar har numera ej n�gon text �ver rutan som anv�nds f�r att klicka bort dem. Denna knapp �r nu ist�llet st�rre.
577	2017-08-16	eTouch	16.1.34 - SF171/SF166	JB
			Varning f�r flera material i materialbunten ska nu ge korrekta varningar.
573	2017-08-11	Client	16.1.33 - Kalenderjustering	PJ
			Man kan nu l�gga in Kalenderjusteringar via klienten som �verskrider den ordinarie kalendern f�r vald avdelning/kategori/maskin/zon/f�retag. Detta finns tillg�ngligt i menyn till v�nster i �versikten. P� detta s�tt kan man enkelt l�gga in tex en planerad �vertid f�r en maskin/avdelning.
575	2017-08-11	eTouch	16.1.32 GUI r�ttning eTouch	JB
			N�r eTouch k�rs under vissa OS-versioner s� kunde listan med planerade ordrar �ka iv�g okontrollerat d� f�nstret �ndrade storlek. Det �r nu justerat.
574	2017-08-11	eTouch	16.1.33 - Ny SF, Varna vid k�rning ej kal.tid	JB
			En ny specialfunktion (177) har tillkommit som g�r det m�jligt att aktivera en varning i eTouch d� maskinen g�r utanf�r kalendertid.
576	2017-08-11	eTouch	16.1.32 - R�ttning materialbunt	JB
			N�r specialfunktionen Materialbunt (166) anv�nds, kunde man tidigare klicka p� materialbunt-knappen med en planerad order markerad, vilket man inte l�ngre kan. Materialbunten som visas �r alltid p�g�ende orders.
571	2017-08-10	Client	16.1.33 - Interna Aktiviteter och service	JH
			Balthzar kan nu automatiskt skapa interna aktiviteter d� serviceintervall p� verktyg har uppn�tts. N�r man sedan utf�r denna aktivitet nollst�lls servicer�knaren.
572	2017-08-10	eTouch	16.1.33 - Ny SF, Undantag kalender	JB
			En ny specialfunktion (176) har tillkommit som g�r det m�jligt att fr�n eTouch tillf�lligt �verstyra den skiftkod som kalendern tilldelar, f�r specificerat tidsintervall
570	2017-08-09	eTouch	16.1.33 - Ny SF Bemanningsfaktor	JB
			En ny specialfunktion har tillkommit (175) som g�r det m�jligt att ange en bemanningsfaktor f�r st�ll- och k�rtid vid start av en ny order.
569	2017-08-08	Client	16.1.33 - �terskapa kalender	JB
			En funktion har tillkommit i Admin som g�r det m�jligt att via urvalskriterier tilldela skiftkod p� historiska transaktioner med h�nsyn till definierade undantag, kallad �terskapa kalender.
568	2017-07-31	eTouch	16.1.32 - Kodning av stopporsak	JB
			Under vissa omst�ndigheter kunde problem uppst� med att koda okodade stopp. Det kan visserligen �ven nu uppst�, men en av dessa orsaker �r nu �tg�rdade.
567	2017-07-28	eTouch	16.1.32 - Quicktouch	JB
			Vid uppstart av QuickTouch f�r f�rsta g�ngen, laddas en standard�vers�ttning ner, ENG. Om denna inte g�r att ladda ner h�ngde sig tidigare programmet utan n�got meddelande om varf�r. Nu visas ett meddelande om vad som h�nder, samt �tg�rdsf�rslag f�r att komma runt problemet.
566	2017-07-27	Client	16.1.32 - Admin Verktyg	JB
			Administrationen av verktyg har f�tt ett par f�rtydligande justeringar, specifikt hanteringen av servicer�knare, samt en r�ttning g�llande problem med att spara poster d� annat spr�k �n svenska var inst�llt p� datorn.
565	2017-07-24	eTouch	16.1.32 - Till�gg SF108	JB
			Den ut�kade batchkontrollen i SF108 har f�tt ytterligare en funktion som verifierar att r�tt tillverkningsorder �r kopplad till batchen som verifieras.
564	2017-07-19	eTouch	16.1.32 - Ny SF, Verktygskontroll Monitor	JB
			En ny specialfunktion har tillkommit (174) som g�r det m�jligt att visa en symbol i eTouchs planeringslista som indikerar status p� verktyg som ska anv�ndas. Kr�ver Monitor som aff�rssystem.
563	2017-07-18	eTouch	16.1.32 - �ndring SF145	JB
			Specialfunktionen 145 (Visa verktygslista) har �ndrats s� att den alltid visas vid uppstart av ny order. D� detta sker f�rv�ntas kvittens anges, �ven om detta ej �r tvingande.
561	2017-07-18	eTouch	16.1.32 - �ndrad hantering SF169	JB
			Utskrifter som g�rs fr�n SF169 sker numera fr�n webservern, vilket inneb�r att att alla dokument som skrivs ut med denna funktion m�ste vara �tkomliga fr�n denna.
562	2017-07-18	eTouch	16.1.32 - �ndrad visning av okodade stopp	JB
			I eTouch visas fr�n och med denna version f�rfluten tid p� p�g�ende okodat stopp i eTouch, p� samma s�tt som vanliga stopporsaker.
559	2017-07-17	eTouch	16.1.32 - Ny SF, P�g�ende okodat stopp	JB
			En ny specialfunktion har tillkommit (173) som g�r det m�jligt att visa en varning om det p�g�r ett okodat stopp i eTouch.
557	2017-07-17	eTouch	16.1.32 - Ny SF, varna vid flera material	JB
			En ny specialfunktion har tillkommit som varnar om mer �n ett material f�rekommer i materialbunten som just nu �r aktiv. Kr�ver aktivering av SF166.
558	2017-07-17	eTouch	16.1.32 - Ny SF, plan. order fr�n k�rplan	JB
			En ny specialfunktion (172) har tillkommit som g�r det m�jligt att styra vilka planerade ordrar som eTouch visar genom att justera k�rplanen i Monitor.
560	2017-07-17	eTouch	16.1.32 - Varning Ingen person inst�mplad	JB
			Varningen Ingen person inst�mplad har nu f�tt en ny bakgrundsf�rg (ljusbl�) som g�r den enklare att s�rskilja fr�n �vriga varningar.
555	2017-07-04	Client	16.1.31 - Stoppgrupp f�rg	pj
			Man kan nu l�gga till en f�rg f�r stoppgrupper f�r att v�lja vilken f�rg de ska ha i rapporter.
556	2017-07-04	Client	16.1.31 - Rapport Tidsf�rdelning stopporsak	pj
			Lagt till urval i rapporten Tidsf�rdelning stopporsaker s� att man kan sortera p� stoppgrupper, och �ven s� att man kan f� stoppgrupperna i den f�rg man valt i admin.
554	2017-07-04	eTouch	16.1.31 - SF158	JH
			Korrigerat s� att SF158 visar TA information f�r r�tt anst�lld.
553	2017-06-27	Client	16.1.30 - Starta och stoppa tillverkningsorder	PJ
			Under tillverkningsorder i client kan man nu starta och stoppa tillverkningsordrar.
550	2017-06-27	Scheduler	16.1.30 - Tid mellan event i Interna Aktiviteter	jh
			Man kan nu l�gga till en minsta tid i minuter mellan att man skapar en intern aktivitet med event och n�r den f�r skapas igen.
552	2017-06-27	Client	16.1.30 - Rapport - Tak-underlag 2 & pivot/graf	PJ
			B�de takunderlag 2 och takunderlag pivot/graf har f�tt extra urval, fr�n och till tillg�nglighetsniv�.
551	2017-06-27	Client	16.1.30 - Rapport - Stopporsaksanalys	Pj
			Rapporten Stopporsaksanalys har gjorts om f�r att bli snabbare och mer justerbar. Dessutom har urvalet fr�n och till tillg�nglighetsniv� lagts till.
549	2017-06-22	eTouch	16.1.29 - Ut�kning av visade f�lt, SF145	JB
			SF145, Visa verktygslista, har f�tt sin lista �ver visade f�lt ut�kade.
548	2017-06-21	eTouch	16.1.29 - SF40 -�ndring	JB
			Kriteriet att det m�ste vara produktionstid f�r att varningen ska visas i eTouch, �r nu borttagen.
547	2017-06-20	eTouch	16.1.29 - L�ngd p� artikelbeskrivningar	JB
			L�ngden p� artikelbeskrivningar som anv�nds har ut�kats till 100 tecken fr�n tidigare 50, vilket tidigare i vissa fall hindrat �verf�ring av planerade ordrar fr�n aff�rssystemet som anv�nds till Balthzar.
546	2017-06-16	eTouch	16.1.29 - Byt artikel avaktiverad f�r Pyramid	JB
			Om materialhantering anv�nds i kombination med Pyramid, s� �r inte l�ngre knappen Byt Artikel m�jlig att anv�nda, d� det visat sig att aff�rssystemet inte klarar denna typ av transaktioner.
545	2017-06-16	eTouch	16.1.29 - In/uts�mpling med kort	JB
			Fr�n och med 2017-06-16 b�r in/ut-st�mpling i eTouch med kort fungera med version 8.2.7 av Monitor.
543	2017-06-12	eTouch	16.1.28 - R�ttning SF90	JB
			Vid anv�ndning as specialfunktion 90, s� kunde pallflaggans information ang�ende vissa artiklar bli fel, vilket nu �r korrigerat.
544	2017-06-12	eTouch	16.1.28-Prestanda SF166	JB
			Prestandan i SF166 har f�rb�ttrats genom att i vissa fall anv�nda Balthzar-databasen ist�llet f�r Pyramid d� det �r m�jligt.
542	2017-06-12	eTouch	16.1.28 - R�ttning SF159	JB
			Ett fel som f�rhindrade utskrifter har r�ttats i specialfunktion 159
541	2017-06-08	eTouch	16.1.28 - Insatser som decimaltal	JB
			Om insatser har definierats som decimaltal p� upplagda artiklar i Balthzar, s� kan nu eTouch hantera detta b�ttre, och inte avrunda till heltal som tidigare.
540	2017-06-07	eTouch	16.1.28 - Historiska ordrar	JB
			Historiska ordrar visade tidigare �ven nu p�g�ende order, vilket nu �r korrigerat.
539	2017-06-02	Client	16.1.28 - nytt urval i rapport	PJ
			I rapporten Tillg�nglighet Pivot/Graf finns det nu ett extra urval, tillg�nglighetsniv�, som l�ter anv�ndaren v�lja vilken/vilka tillg�nglighetsniv�er man vill f� rapporten �ver.
537	2017-06-02	eTouch	16.1.28 - eTouch statistik, Pareto	JB
			N�r stopporsaksstatistik visas i eTouch, kan man nu v�lja att f� samma data som tidigare visades i ett t�rtdiagram, som ett stapeldiagram i fallande ordning.
538	2017-06-02	Client	16.1.28 - Snabbrapporter i anslagstavlan	Pj
			I anslagstavlan kan man nu l�gga till snabbrapporter.
536	2017-05-31	eTouch	16.1.28 - St�lltidsavvikelse, lista	JB
			En bugg som gjorde att Till�ten negativ avvikelse i procent och Till�ten positiv avvikelse i procent, inte kunde anges som decimaltal, �r r�ttad.
535	2017-05-31	eTouch	16.1.28 - Varning som ej f�rsvinner	JB
			D� varningen [Maskinen g�r, ingen order startad] visas, kunde eTouch tidigare inte ta sig d�rifr�n p� egen hand, vilket nu g�rs om antingen maskinen stannar (d� Kvittera stopp visas) eller om en order startas fr�n annan sk�rm, d� startbilden visas.
534	2017-05-30	eTouch	16.1.27 - SF166 Materialbunt (Pyramid)	JB
			Prestandaproblemen vid anv�ndningen av SF166 har �tg�rdats, och b�r inte l�ngre vara en irritationsfaktor. Makulering har flyttats till Historiska ordrar d� denna SF anv�nds.
533	2017-05-30	eTouch	16.1.27 - P�g�ende order-listan, eTouch	JB
			Listan som visas i eTouch med p�g�ende ordrar kunde tidigare inte anv�ndas f�r att v�lja pallflaggor att skriva ut, vilket nu �r r�ttat.
532	2017-05-30	Client	16.1.27 - Ny Rapport, TAK-underlag pivot/graf	pj
			En ny rapport har lagts till som visar Tak-underlag i pivot graf form. Urvalet �r i stort samma som f�r rapporten Tak-underlag 2. Mer info finns i balthzar hj�lpen.
531	2017-05-23	eTouch	16.1.26 - Tillverkningsordertext i gr�nt kort	JH
			Fritext f�r tillverkningsorder finns nu med i utskrift av gr�nt kort.
528	2017-05-22	eTouch	16.1.26 - �ndring i SF166	JB
			N�r SF166 (Materialbunt) anv�ndes tidigare, s� kunde det ta l�ng tid att ladda listan. Det g�r det fortfarande, men ett meddelande som s�ger att laddning p�g�r visas, f�r att undvika att anv�ndaren ska tro att programmet h�ngt sig.
529	2017-05-22	eTouch	16.1.26 - St�ll avslutas fr�n annan eTouch	JB
			Om st�lltid avslutades genom att f�rstabitskontrollen gjordes fr�n en annan sk�rm �n den urpsrungliga, s� f�rsvann inte st�lltidsbilden i eTouch tidigare, vilket nu �r �tg�rdat.
530	2017-05-22	eTouch	16.2.26 - Utskrift av gr�nt kort	JH
			Utskrift gr�nt kort har nu �ven rapportnummer f�r operationer med.
527	2017-05-19	eTouch	16.1.26 - Saknade �vers�ttningar	JB
			�vers�ttningar f�r symboltyper i Admin f�r Attention saknades tidigare, vilket nu �r �tg�rdat.
526	2017-05-18	eTouch	16.1.26 - Pallflaggenumrering med SF13	JB
			N�r flera kopior skrevs ut av pallflaggan fr�n eTouch med SF13 aktiv (pallflaggeutskrift utan rapportering), st�mde inte numreringen. Detta �r nu r�ttat.
525	2017-05-17	eTouch	16.1.26 - Ny SF, utskrift av kopplade dokument	JB
			En ny specialfunktion (169) har tillkommit som g�r det m�jligt att vid orderstart skriva ut alla dokument som �r kopplade i Monitor med flaggan Automatisk utskrift.
524	2017-05-17	Client	16.1.26 - Planerade ordrar och insatser	jh
			N�r man skapar en planerad order i klienten kan man nu ha med insatser med decimaler.
522	2017-05-16	Client	16.1.26 - Tillverkningsorder detaljer	jh
			�tg�rdat problem med att Tillverkningsorder detaljer kunde visa felaktig data.
523	2017-05-16	eTouch	16.1.26 - Rapportnummer i Pyramid	JB
			Rapportnummer som genererades i Balthzar kunde vid direktkoppling till Pyramid skapas med ej giltiga tecken, vilket f�rhindrade fullst�ndigt korrekta starter av ordrar. Det �r nu r�ttat.
521	2017-05-16	Client	16.1.26 - Aktiviteter p� artikel	JH
			Om man k�r flera parallella tillverkningsorder p� en maskin kommer nu aktiviteter som skapas f� r�tt artikel.
520	2017-05-15	Client	16.1.25 - Rapport Tillg�nglighet pivot/graf	pj
			I rapporten Tillg�nglighet pivot graf finns nu ett extra urval, j�mf�r med ett annat tidsspann. Kryssar man i detta f�r man fylla i en andra tidsperiod. I rapporten kan man sen se de b�da graferna var f�r sig, eller s� kan man j�mf�ra de b�da graferna mot varandra.
519	2017-05-08	eTouch	16.1.24 - Extra op-kort vid orderstart, SF168	JB
			Om man vill ha ett extra operationskort vid orderstart n�r SF 167 anv�nds, kan nu denna nya specialfunktion aktiveras, vilket g�r att en extra kopia skrivs ut.
518	2017-05-04	Client	16.1.24 - Rapport Uppf�ljning checklista	PJ
			I urvalet f�r rapporten uppf�ljning checklista finns nu �ven fr�n och till tillverkningsordernummer med.
517	2017-05-03	eTouch	16.1.24 - Ny SF, utskrift OP-kort, orderstart	JB
			En ny specialfunktion (167) har tillkommit som g�r att en utskrift av operationskort automatiskt g�rs vid orderstart, f�r startad order.
516	2017-05-02	eTouch	16.1.23 - Alternativ status, Historiska ordrar	JB
			Fr�n och med version 16.1.23 s� kan man v�lja att visa en bild p� en springande gubbe / m�lflagga, som en alternativ kolumn till Makulerad, som bara visade 0 och 1.
515	2017-05-02	eTouch	16.1.23 - �ndring i historiska ordrar	JB
			N�r historiska ordrar anv�nds var det i vissa l�gen otydligt n�r, och om, listan laddades om. Det visas nu i rutan som dyker upp efter att knappen Makulera rest tryckts.
514	2017-04-28	eTouch	16.1.23 - Ny SF, alternativ omr�kningsfaktor	JB
			En ny specialfunktion (164) har tillkommit som g�r det m�jligt att ange en alternativ omr�kningsfaktor f�r planerad stycktid, i Monitor. Denna faktor anv�nds d�refter p� startade ordrar n�r artikeln k�rs.
513	2017-04-28	eTouch	16.1.23 - Ny SF, Styraktivitet vid kodning av stop	JB
			En ny specialfunktion har tillkommit (163) som g�r det m�jligt att koppla styraktiviteter vid stoppkodning av p�g�ende stopp.
512	2017-04-24	Client	16.1.22 - Snabbrapporter	PJ
			Man kan nu skapa snabbrapporter i klienten. En snabbrapport �r en vanlig rapport som du snabbt kan generera/schemal�gga via menyn till v�nster i �versikten. Snabbrapporter g�r att g�ras tillg�ngliga f�r alla p� f�retaget.
510	2017-04-21	eTouch	16.1.22 - Visa ej makulerade ordrar	JB
			I eTouch visas inte de ordrar som makulerats inom tidsspannet 2 dagar bak�t, som planerade ordrar.
509	2017-04-21	eTouch	16.1.22 - Ny SF, blockera rapp. vid makulering	JB
			En ny specialfunktion (162) har tillkommit som g�r det m�jligt att blockera rapportering p� makulerade tillverknigsordrar.
511	2017-04-21	eTouch	16.1.22 - �ndring SF99	JB
			Vid anv�ndning av SF99 blockeras inte l�ngre rapportering via planerade ordrar.
508	2017-04-20	eTouch	16.1.22 - Omstartsregler �ndrade	JB
			eTouch kontrollerar att programmet inte slukar f�r mycket minne, och startar om ifall det beh�vs. Kriterierna f�r omstart �r nu �ndrade till att vara b�ttre anpassade f�r de kunder som har detta problem.
506	2017-04-20	eTouch	16.1.22 - �ndring SF98	JB
			Formul�ret f�r SF98 (Visning av OPC-v�rden) har justerats till att b�ttre hanteras n�r det k�rs fr�n eTouch utan tangentbord.
507	2017-04-20	eTouch	16.1.22 - Ut�kad �vers�ttning	JB
			Flertalet f�ltnamn som visades i tabellen f�r bland annat SF98 var tidigare inte �versatta. De flesta ska nu vara det.
504	2017-04-13	Client	16.1.21 - Utskrift av gr�nt kort	JH
			Utskrift av gr�nt kort inneh�ller ej l�ngre dubletter av rader.
505	2017-04-13	Client	16.1.21 - Interna aktiviter p� tillverkningsorder	JH
			Interna aktiviteter laddar nu information om nuvarande tillverkningsorder om denna �r vald.
502	2017-04-06	Scheduler	16.1.20 - Utskrifter av gr�nt kort	JH
			Utskrifter av gr�nt kort skriver nu ut samtliga efterf�ljande operationer och inkluderar �ven en materiallista.
503	2017-04-06	Client	16.1.21 - Uppf�ljning checklista	JH
			Rapporten Uppf�ljning checklista har korrigerats s� att samtliga aktiviteter i urvalet visas.
499	2017-04-05	Client	16.1.20 - Nya objekt i anslagstavlan	PJ
			Tv� nya objekt har lagts till i anslagstavlan: 1. Tabell - flerradigt, detta objekt fungerar p� samma s�tt som den vanliga tabellen med den enda skillnaden att varje rad i tabellen kan visa flera raders text i sig. 2. R�rlig text, detta objekt tar in en text ifr�n en sql-fr�ga och skriver ut succesivt ut texten, tecken f�r tecken.
500	2017-04-05	Client	16.1.20 - Ny funktion: Meddelanden.	PJ
			En ny funktion har lagts till i klienten. Meddelanden. I denna funktion kan man skapa meddelanden som man vill visa. Man f�r d� v�lja avdelning, maskin, kategori och zon som meddelandet g�ller samt mellan vilka datum det �r aktuellt. Denna funktion m�ste f�rst aktiveras i admin.
501	2017-04-05	Client	16.1.20 - Ny funktion: Styraktivitet	PJ
			I Admin kan man nu skapa styraktiviteter samt s�tta h�ndelser som ska ske d� dessa styraktiviteter kallas p�.
498	2017-04-04	eTouch	16.1.20 - Makulera rest	JB
			N�r makulera rest funktionen anv�nds fr�n historiska ordrar i eTouch, ges numera information om att makuleringsbeordring redan skapats, om s� �r fallet.
497	2017-03-29	eTouch	16.1.19 Ny SF, automatisk utskrift av gr�nt kort	JB
			En ny specialfunktion (159) har tillkommit som g�r det m�jligt att f� en automatisk utskrift av gr�nt kort vid orderstart.
496	2017-03-29	eTouch	16.1.19 - Automatisk utskrift av OP-kort	JB
			Vid anv�ndning av automatisk utskrift av operationskort i eTouch gavs tidigare ett fel som nu �r r�ttat.
494	2017-03-28	Client	16.1.18 - �rva tidsst�mpel i interna aktivteter	JH
			I event f�r interna aktiviteter kan man v�lja att den nya aktiviteten ska �rva tidst�mpel av f�reg�ende aktivitet. Detta inneb�r att starttid och eventuell tidsst�mpel i nya aktiviteten kommer s�ttas till angiven tidsst�mpel.
492	2017-03-28	Client	16.1.18 - Standardv�rde i interna aktiviteter	JH
			Man kan nu v�lja att v�rdet i en checklista ska h�mtas fr�n processloggning om detta finns.
493	2017-03-28	Client	16.1.18 - Interna aktiviteter ber�kning	JH
			Man kan nu v�lja att angivna v�rdet ska r�knas ut som skillnad eller snitt mellan tv� andra rader i checklistan.
495	2017-03-28	Client	16.1.20 - Skrivning till OPC-v�rden	JH
			Man kan nu ange en delay mellan skrivningar till OPC-v�rden.
489	2017-03-23	eTouch	16.1.18 - Spara batch	JB
			I tidigare versioner av eTouch kunde man av misstag dubbelklicka p� Spara i batchformul�ret, vilket nu �r hindrat.
490	2017-03-23	eTouch	16.1.18 - Tydliga markeringar	JB
			Genom att tvinga fram markeringar av k�rande/historiska och planerade ordrar har tillg�ngligheten av rapporteringsfunktioner styrts om till att vara de avsedda.
488	2017-03-21	Client	16.1.17 - Uppf�ljning checklista	JH
			Korrigerat rapporten s� att valen Status tom och Typ tom tas med.
485	2017-03-17	eTouch	16.1.17 - Justering SF 40	JB
			Varningen f�r saknad inst�mplad person varnar inte l�ngre d� satt stopporsak har Prod.tid = Nej.
486	2017-03-17	Client	16.1.17 - Larmhantering f�r processv�rdesgr�nser	JH
			Man kan nu s�tta en minsta tid mellan larm f�r processv�rdesgr�nser.
487	2017-03-17	Client	16.1.17 - SQL och f�rbjudna termer	JH
			Termen create �r nu ej l�ngre f�rbjuden att anv�nda d� man skapar egna SQL fr�gor.
484	2017-03-17	Client	16.1.17 - F�rb�ttrad uppdateringsfunktion	JB
			Fr�n och med version 16.1.17 s� kan automatisk uppdatering beg�ras �ven av Client och Attention. Se dokumentationen f�r ytterligare information.
479	2017-03-15	eTouch	16.1.17 - Avbruten f�rstabitskontroll	JB
			I eTouch f�rv�ntas man s�tta en stopporsak om f�rstabitskontrollen avbryts (st�ll), vilket inte fungerade som avsett. Det g�r det nu.
478	2017-03-14	Client	16.1.16 Rapport st�lltidsavvikelse	pj
			Rapporten st�lltidsavvikelse har f�tt 2 nya urval. Det f�rsta l�ter dig gruppera rapporten p� maskin eller som nu ogrupperat. Den andra inst�llningen l�ter dig visa summering och snitt p� alla kassationer. Har man dessutom grupperat p� maskin f�r man �ven ett snitt per maskin.
477	2017-03-14	eTouch	16.1.16 - Historiska ordrar, eTouch	JB
			Varje g�ng listan med historiska ordrar laddas (d� menyalternativet v�ljs) markeras �versta ordern. Detta f�r att undvika att felaktiga antaganden g�rs om vilken order som valts sedan tidigare.
474	2017-03-13	Client	16.1.16 - rapporter	pj
			2 nya rapporter har lagts till: Historik Tillverkingsorder pivot/graf och Historik per dag pivot/graf.
476	2017-03-13	Client	16.1.16 - Extra kanpp i rapportvisaren	pj
			I rapportvisaren finns nu en ny knapp som l�ter anv�ndaren skapa egna f�lt till pivotn�tet. I f�lten kan man sen g�ra egna ber�kningar.
472	2017-03-13	Client	16.1.16 - Livedata buggfix	pj
			N�r man valde att visa Nuv�rde i livedata tar det nu h�nsyn till antalet decimaler som ska visas, tidigare gjordes det enbart f�r min/max v�rdena.
473	2017-03-13	Client	16.1.16 - Anslagstavla f�ste	pj
			I anslagstavlan har en ny inst�llning lagts till som heter rutn�tsstorlek. Denna inst�llning s�tter en gr�ns p� hur m�nga pixlar ett f�nster minst f�r flyttas/f�rstoras/f�rminskas f�r att g�ra det l�ttare att placera f�nster j�mte varandra.
475	2017-03-13	Client	16.1.16 - Nytt tidsspann	pj
			N�r man genererar rapporter finns nu tv� nya tidsspann man kan v�lja, YTD (year to date) och YTD - 1, som ger info mellan b�rjan av �ret till nu. (YTD - 1 ger fr�n b�rjan av f�rra �ret till f�r ett �r sedan, dvs samma intervall fast ett �r tidigare)
471	2017-03-10	eTouch	16.1.16 - Ny SF ange endast batch	JB
			N�r sp�rbarhet anv�nds i eTouch tillsammans med denna SF, s� beh�ver endast batchnummer anges. Antal och leverant�r d�ljs, och s�tts automatiskt till 0 respektive -.
470	2017-03-09	eTouch	16.1.16 - Uppdatering av eTouch med SF114	JB
			Den automatiska uppdateringen av eTouch kunde tidigare inte g�ras om SF114 var aktiverad, vilket nu �r �tg�rdat.
468	2017-03-08	eTouch	16.1.16 - Felaktiga intervall, eTouch	JB
			N�r rapporten Kassationsrapport k�rs i Client st�mde tidigare inte eTouchs Kassationsfrekvens med resultatet om samma intervall anv�ndes. Det g�r det nu.
469	2017-03-08	eTouch	16.1.16 - Historiska ordrar, eTouch	JB
			I tidigare versioner av eTouch kunde markeringar gjorda i Historiska ordrar tappas, vilket gjorde att rapporteringar och Pallflaggeutskrifter inte blev gjorda p� avsett vis, vilket nu �r justerat.
465	2017-03-06	Client	16.1.15 - Rapport Verktyg 2	pj
			Att f� rapport p� olika servicegrupper fungerar nu.
466	2017-03-06	Client	16.1.15 - Anslagstavla	pj
			�tg�rdat diverse sm�fel i anslagstavlan.
463	2017-03-06	Scheduler	16.1.15 - Tidsf�rdelning stopporsaker Pivot/Grah	JH
			Rapporten Tidsf�rdelning stopporsaker Pivot/Graf g�r nu att schemal�gga.
464	2017-03-06	Client	16.1.15 - Rapport TAK-underlag 2	pj
			Det g�r nu att i rapporten takunderlag 2 gruppera p� resultatet p� Maskin (som innan), Verktyg, Artikel, Skift, Avdelning, Zon, Kategori och Anst�llningsID
467	2017-03-06	Client	16.1.15 - Livedata Nya inst�llningar
			I livedatavisningen finns nu tv� nya inst�llningar: Den f�rsta heter "Visa/d�lj y-axel" som l�ter anv�ndaren v�lja om han vill se y-axeln eller inte. Den andra l�ter anv�ndaren v�lja om min/max ska visas i bildtexten eller om man ist�llet ska visa det nuvarande v�rdet.
461	2017-03-03	eTouch	16.1.15 - Ut�kning SF43	JB
			Specialfunktion 43, Visa operationstext, har nu ut�kats till att �ven visa kommentar till operationen.
462	2017-03-03	eTouch	16.1.15 - Infosida/varningar	JB
			N�r specialfunktionen 96, Infosida som f�rstasida, anv�ndes tidigare, s� visade inte eTouch varningar som det var t�nkt, vilket nu �r r�ttat.
458	2017-03-02	Attention	16.1.15 - Ny symboltyp	JB
			En ny symboltyp har lagts till som inneh�ller samma info som symboltyp 3, men med ut�kningen att prioritetssymbolen f�r maskinen �ven visas i �vre h�gre h�rnet.
459	2017-03-02	eTouch	16.1.15 - Alternativ artikel vid batch, Pyramid	JB
			N�r batchhantering anv�nds med Pyramid som aff�rssystem, s� kan man numera �ndra vilket material som ska p�verkas, genom att manuell �ndra detta.
457	2017-03-02	Client	16.1.15 - F�rtydligat gr�nssnitt	JB
			I admin var tidigare gr�nssnittet f�r litet f�r att visa beskrivningen av symboltyper, vilket nu �r justerat.
460	2017-03-02	Client	16.1.15 - Justera stopporsak	JH
			I justera stopporsak �r nu max tiden f�r en �ndring 9 dagar ist�llet f�r 24 timmar.
456	2017-03-01	eTouch	16.1.15 - Ny specialfunktion, varning sp�rbarhet	JB
			En ny specialfunktion (156) har lagts till som styr om varningen Maskinen g�r och batchnummer saknas! ska visas.
453	2017-02-28	eTouch	16.1.15 - �vers�ttningar i eTouch	JB
			Den engelska �vers�ttningen f�r menyn �vrigt saknades tidigare f�r tv� menyval, som nu �r r�ttat.
455	2017-02-28	Client	16.1.15 - Uppf�ljning Checklista	JH
			�tg�rdat s� att rapporten Uppf�ljning Checklista g�r att schemal�gga.
454	2017-02-28	eTouch	16.1.15 - Sortering p� st�lltyper	JB
			N�r specialfunktionen f�r st�lltyper anv�nds kan man numera v�lja att visa dem i valfri sorteringsordning i eTouch.
452	2017-02-28	eTouch	16.1.15 - Rapporterat f�reg�ende operation	JB
			I eTouch kunde tidigare Tillverkningsorderbilden i vissa fall visa ett antal p� f�reg�ende operation, �ven om s�dan inte fanns. Detta �r nu r�ttat.
451	2017-02-24	Client	16.1.15 - Livedata	pj
			Fixat diverse buggar i livedata och i livedata alla maskiner. Dessutom lagt till en extra inst�llning i livedata som l�ter anv�ndaren v�lja om nuv�rdet eller min/maxv�rde ska visas i bildtexten.
450	2017-02-22	Client	16.1.14 - Anslagstavlan	pj
			Anslagstavlan syntes f�rut enbart f�r n�gra f�retag, nu ska den synas f�r alla.
449	2017-02-21	eTouch	16.1.13 - SF88, pappret �r tillbaka	JB
			Pappret som tog anv�ndaren tillbaka till anslagstavlan �r nu tillbaka efter en tillf�llig fr�nvaro.
447	2017-02-16	Client	16.1.13 - Interna aktiviteter och regler	JH
			�tg�rdat ett problem d�r Interna Aktiviteter ibland ignorerade den valda regeln.
448	2017-02-16	Client	16.1.13 - Anslagstavla	pj
			Lagt till ett nytt verktyg i clienten kallat anslagstavla. I Anslagstavlan kan man skapa grafer, m�tare, r�knare, tabeller och livedata och visa allt p� ett st�lle. Anslagstavlan kommer man �t i menyn till v�nster i �versikten. Mer information om anslagstavlan och hur den fungerar kommer finnas i clienten under Hj�lp -> hj�lp
446	2017-02-16	Client	16.1.13 - Urval p� Produktionsrapport maskinstat.	JH
			Korrigerat hur rapporten Produktionsrapport maskinstatistik v�ljer vilka maskiner den ska visa statistik f�r.
445	2017-02-16	eTouch	16.1.13 - Anv�ndardstyrd f�rg SF30	JB
			Bakgrundsf�rgen p� varningen som varnar om Order klar i eTouch kan nu konfigureras till att vara annan �n standard.
444	2017-02-15	eTouch	16.1.13 Ber�kning av tidsf�rdelning mellan ordrar	PL
			Denna ber�kning �r justerad f�r att ge en mer r�ttvis tidsf�rdelning vid tex lasersk�rning d�r flera jobb k�rs p� samma pl�t med olika antal detaljer. Tidigare togs inte h�nsyn till antalet detaljer utan enbart den planerade stycktiden.
443	2017-02-14	eTouch	16.1.12 - SF48 + SF149	JB
			N�r kombinationen av SF48 och SF149 anv�nts med Pyramid som ERP system, kunde det rapportnummer som anv�nts bli fel, vilket nu �r r�ttat
441	2017-02-13	Client	16.1.12 - Livedata bildtext	pj
			En bugg som stundtals la till en extra kolumn f�r bildtexter har �tg�rdats.
442	2017-02-13	Client	16.1.12 - Livedata alla kunde f�rsvinna	pj
			En bugg som gjorde att livedata alla f�rsvann om man st�ngde ner det minimerat har �tg�rdats.
435	2017-02-10	Client	16.1.12 - Uppf�ljning checklista	JH
			Rapporten Uppf�ljning checklista kommer nu visa aktiviteter som den tidigare missade.
436	2017-02-10	Client	16.1.12 - Interna Aktiviteter historik order	JH
			Interna Aktiviteter historik f�r p�g�ende order visar ej l�ngre dubbletter av aktiviteter
440	2017-02-10	eTouch	16.1.12 - Kassationer till fel k�rning	JB
			Kassation p� historiska ordrar kunde i vissa fall f� fel k�rningsnummer i systemet, vilket nu �r r�ttat. Effekten blev d� att dessa inte syntes i diverse rapporter.
434	2017-02-09	eTouch	16.1.12 - Stopphistorik i eTouch	JB
			Kodade stopp i eTouch som har en text angiven till sig visar nu en rad med stopporsak samt f�rsta raden med tillh�rande text.
433	2017-02-09	eTouch	16.1.12 - Alternativa intervall	JB
			eTouchs visning av kodade/okodade stopp har nu f�tt tre nya knappar med vilka man kan �ndra intervall f�r stoppen som visas, 24timmar, f�rra skiftet och innevarande skift.
430	2017-02-08	eTouch	16.1.12 - Direkt visning,inmatningsformul�r eTouch	JB
			I vissa valformul�r i eTouch laddas numera alternativen direkt, ist�llet f�r via knapptrycket Visa alla, beroende p� antal resultat att v�lja bland.
432	2017-02-07	Client	16.1.12 - Starta ny aktivitet	JH
			Formul�ret f�r att starta en ny aktivitet visar nu r�tt urval av aktiviteter.
423	2017-02-07	Client	16.1.11 - Egna Interna Aktiviteter	JH
			Man kan nu �ppna ett formul�r som heter Egna Interna Aktiviteter. D�r kan man utf�ra de aktiviteter man utdelat till anv�ndaren som �ppnar formul�ret. F�r att best�mma vilka aktiviteter som ska visas d�r m�ste man g� in i Admin -> Interna Aktiviteter -> Anv�ndare.
428	2017-02-07	Client	16.1.11 - Korrigering i TAK-underlag	JH
			Rapporten TAK-Underlag visar nu korrekt intj�nade timmar f�r maskiner med manuell kvantitetsr�kning
429	2017-02-07	Client	16.1.12 - Summering av Interna Aktiviteter	JH
			Summeringen av interna aktiviteter i rapporten Uppf�ljning Checklista fungerar nu korrekt.
425	2017-02-07	Client	16.1.11 - Livedata Alla maskiner	pj
			Ett fel i "livedata alla maskiner" som ledde till att f�nster inte laddades in p� korrekt position har �tg�rdats.
426	2017-02-07	Attention	16.1.11 - F�rger i smartslide
			Ett fel som skapade tomma serier i smartslide-designern �r nu �tg�rdat
424	2017-02-07	Client	16.1.11 - Processv�rdesgr�nser	JH
			F�rb�ttrat administrationen av processv�rdesgr�nser.
427	2017-02-07	eTouch	16.1.11 - Pallflagga med SF13	JB
			Tidigare kr�vdes att man angav antal d� SF13 var aktiv, den kontrollen �r nu borttagen.
431	2017-02-07	Client	16.1.12 - Sortering av Interna Aktiviteter	JH
			Urval f�r interna aktiviteter i rapporter �r nu korrekt.
422	2017-02-06	eTouch	16.1.11 - R�ttning SF88	JB
			N�r SF88 anv�ndes, uppdaterades eTouchs anslagstavla p� ett ej avsett s�tt, vilket nu �r �ndrat.
421	2017-02-06	eTouch	16.1.11 - Rensning av DB-anrop	JB
			Funktionen f�r ett par frekvent f�rekommande databas-anrop som g�rs fr�n eTouch har bytts ut mot funktionalitet som ej b�r tynga ner SQL-servern i samma grad som tidigare.
419	2017-02-03	Client	16.1.10 - SQL-taggar	JH
			Korrigerat f�ljande taggar i SQL: Ig�r start, Ig�r slut, Denna vecka start, Denna vecka slut, F�rra veckan start, F�rra veckan slut
418	2017-02-02	Client	16.1.10 �versikter i Client!!	PL
			P� grund av att vi uppdaterat komponenten som hanterar �versikter s� kommer de inst�llningar man gjort i vissa fall att f�rsvinna. Man f�r d� l�gga ut f�lten p� nytt i den �versikten. Vi beklagar detta, men vi kan tyv�rr inte styra �ver denna funktion.
417	2017-02-01	eTouch	16.1.10 - Utskrift pallflagg	JB
			Utskrift av pallflagga hindrades tidigare om den gjordes fr�n listan med nu k�rande ordrar. Det �r nu �ndrat.
414	2017-02-01	eTouch	16.1.10 - Sortering planerade ordrar Jeeves	JB
			N�r man k�r Jeeves visades tidigare inte planerade ordrar i den sorteringsordning som avsetts. Det �r nu justerat.
416	2017-02-01	Attention	16.1.10 - Validering i Attention	JB
			Rutan som g�r inloggningen i Attention f�r att �ndra inst�llningar har numera asterisk som tecken f�r att d�lja l�senordet d� det skrivs in. Valideringsrutinen verifierar anv�ndaren mot beh�righetsniv� 9.
415	2017-02-01	eTouch	16.1.10 Sorteringsordning planerade ordrar	JB
			Vid byte av maskin i eTouch l�g tidigare den f�reg�ende sorteringsordningen kvar f�r den maskin man bytte till. Det �r nu �ndrat s� att nya maskinen f�r standardsortering efter bytet
407	2017-01-31	eTouch	16.1.9 - Inloggning Attention	JB
			N�r diagramkomponenten anv�nds i Attention eller visning av attentionslides, s� visas numera en inloggningsruta f�re designformul�ret, d�r man bara kommer vidare om man har anv�ndartyp 9. dett f�r att f�rhindra att obeh�riga g�r �ndringar.
408	2017-01-31	eTouch	16.1.9 - Tillbaka till huvudformul�r i eTouch	JB
			N�r maskinen �ndrar status i eTouch kunde man bli sl�ngd fr�n exempelvis formul�ret d�r text anges till okodade stopp. Det �r nu �ndrat.
412	2017-01-31	eTouch	16.1.9 Visning av ordrar fr�n Jeeves i Etouch	JB
			Tidigare kunde ordrar i eTouch visas i fel ordning i planeringen om man anv�nde prioritetskod i Jeeves. Detta �r nu �tg�rdat s� att dessa visas i prioritetsordning i f�rsta hand och d�refter i datumordning.
405	2017-01-31	Client	16.1.9 - Stopporsaker	pj
			I Client visas nu de olika stopporsakslistorna p� samma s�tt. Tidigare visades olika listor p� olika st�llen, med olika sortering.
406	2017-01-31	Client	16.1.9 - Material	pj
			I Client ->�versikt -> tillverkningsorder -> Material kan man nu se vilket Material som beh�vs f�r en Tillverkningsorder. F�r att se detta, g� in i tillverkningsorder f�r maskinen som �r intressant, v�lj en tillverkningsorder och klicka p� "Material" I listan till v�nster.
409	2017-01-31	eTouch	16.1.9 - Statistik eTouch	JB
			Statistiken i eTouch visade felaktiga intervall i datan j�mf�rt med rubriken, d� alternativen f�r stopporsaksstatistik anv�nds. Detta �r nu justerat.
410	2017-01-31	eTouch	16.1.9 - Gemensamma inst�llningar	JB
			Fr�n och med i version 16.1.9 kommer inst�llningar som g�ller visningen av attentionslides i eTouch vara gemensamma, dvs olika maskiner kommer visa samma layout �ven om datan kan skilja sig.
411	2017-01-31	eTouch	16.1.9 - Batchhantering Pyramid	JB
			St�d f�r hantering av lagerplats utan batch har lagts till vid materialhanteringen i eTouch, d� Pyramid anv�nds.
404	2017-01-23	Client	16.1.8 �versikt artiklar 2	JH
			Korrigerat s� att fler f�lt �r tillg�nglig i �versikt artiklar 2. F�nstret f�r att v�lja kolumner dyker endast upp om inga kolumner �r valda.
403	2017-01-23	Client	16.1.8 - Rapportvisaren uppdaterad	pj
			Lade till knappar f�r att d�lja/visa tabellerna i rapportvisaren.
402	2017-01-20	Client	16.1.8 - R�ttningar stopporsakshantering Client	JB
			Ett flertal mindre r�ttningar har gjorts i hanteringen av stopporsaker i Client.
401	2017-01-19	eTouch	16.1.7 - F�rstabitskontroll i eTouch	JB
			D� f�rstabitskontrollen i eTouch anv�nds, kunde man tidigare r�ka ut f�r att programmet h�ngde sig om man haft en viss kombination av specialfunktioner aktiverade. En �tg�rd som l�ser detta �r gjord.
399	2017-01-18	Attention	16.1.6 - Fixade bugg i attention	PJ
			En bugg som gjorde att attention ibland inte ritade ut data �r fixad.
391	2017-01-17	eTouch	16.1.5 - Utskrift pallflagga	JB
			Vid utskrift av pallflagga visas nu information om vilken order pallflaggan g�ller i �vre delen av f�nstret.
392	2017-01-17	eTouch	16.1.5 - Inloggning vid anv�ndning av wizard	JB
			N�r guiden f�r inst�llningar anv�nds f�r slides med komponenten som visar diagram, s� kr�vs numera inloggning i utvalda l�gen.
394	2017-01-17	Client	16.1.5 - L�gg till SQL-taggar	pj
			I SQL-�versikten kan man nu l�gga till de olika taggarna som finns via en drop-down lista. Ett exempel p� en tagg �r <%company_id%>
395	2017-01-17	Client	16.1.5 - �kat urval i rapport	pj
			I rapporten Tillg�nglighet pivot/graf (tidigare tillg�nglighet per vecka 2) finns nu 3 extra urval. En grupperingsterm f�r tid d�r man f�r tidsskala. En grupperingsterm p� objekt d�r man f�r v�lja om man t.ex vill ha olika staplar per avdelning eller per skift. Ett val f�r produktionstid, d�r man v�ljer om man bara vill visa resultat under produktionstid.
393	2017-01-17	eTouch	16.1.4 Ut�kad loggning	JB
			I eTouch finns nu ett alternativ f�r ut�kad loggning under inst�llningarna. Denna bock ska endast anv�ndas p� rekommendation av Delacroy.
397	2017-01-17	Client	16.1.5 - Bakgrundsf�rg i livedatavisning	PJ
			I inst�llningarna f�r livedatavisningar kan man nu v�lja backgrundsf�rg grafen och f�r gr�nsv�rdena.
396	2017-01-17	Client	16.1.5 - Filter i �versikt	pj
			Det g�r nu att filtrera data i �versikten. Det g�r �ven att se de senast anv�nda filtren.
398	2017-01-17	Client	16.1.6 - Artikeltyp i Interna Aktiviteter	JH
			Man kan nu v�lja att en Intern Aktivitet ska skapas om en viss artikeltyp k�rs.
389	2017-01-09	Client	16.1.3 - Exec i SQL-fr�gor	JH
			Egna SQL fr�gor accepterar nu kommandot exec.
388	2017-01-09	Client	16.1.3 - Ny rapport, kassation pivot/graf	PJ
			Ny pivot/graf rapport tillagd som visar kassationer under ett tidsintervall.
390	2017-01-09	Client	16.1.3 - F�rg Livedatavisning	PJ
			Man kan nu v�lja vilka f�rger processv�rdet ska ritas ut i genom att s�tta en f�rg i admin-> processv�rden. V�ljer man automatisk v�ljs f�rgerna fortfarande p� samma s�tt som nu.
386	2017-01-02	Client	16.1.2 - Ny rapport, St�lltidsavvikelser - lista	PJ
			Ny rapport tillagd som visar st�lltider som avvikit i tid fr�n planerade st�lltider.
387	2017-01-02	Client	16.1.2 - Livedatavisning visar �ven m�lv�rde	PJ
			I livedatavisning ser man �ven �vre och undre m�lv�rde d�r de �r satta. Man kan �ven manuellt s�tta m�lv�rden f�r OPCs
385	2016-12-22	eTouch	16.1.2 Administration av maskinparametrar	JH
			Man kan nu v�lja vilken Smart Slide en maskin ska visa som standard om man anv�nder sig av SF96.
384	2016-12-21	Scheduler	16.1.2 - Schemal�ggaren och felrapportering	JH
			Schemal�ggaren kommer nu inte l�ngre att skicka ett mail om rapporten misslyckades att skapas.
382	2016-12-20	Client	16.1.1 - Nya versioner av rapporter	PJ
			Det finns nu en version 2 av Maskintimmar, Stopplista, TAK-underlag, St�lltid per verktyg lista, Tidsf�rdelning stopporsaker per avdelning � lista, Produktionsrapport, St�lltider snitt. Rapporterna �r i stort sett identiska med f�reg�ende rapporter. Skillnaden �r att en ny rapportmotor anv�nds. De gamla rapporterna kommer p� sikt att tas bort d� den gamla rapportmotorn kommer att utg�.
381	2016-12-20	Client	16.1.1 Uppf�ljning interna aktiviteter	JH
			Korrigerat s� att rapporten Uppf�ljning Interna Aktiviteter anv�nder sig av det angivna tillverkningsorder numret korrekt.
380	2016-12-19	Client	16.1.1 - Redigering av Egna �versikter	JH
			Man kan nu redigera och ta bort egna �versikter och egna pivot �versikter fr�n klienten.
379	2016-12-15	Client	16.1.0 Balthzar ny huvudversion sl�pps	PL
			Den nya versionen sl�pps. F�r information kring de nyheter som �r mest v�sentliga s� se v�r hemsida www.balthzar.se/support/aktuell-version
378	2016-12-06	Client	15.2.173 - Interna Aktiviteter och arbetsordrar	JH
			N�r en Intern Aktivitet skapas binds den till den arbetsorder som k�rs p� en maskin. Om denna maskin �r en dotter som ej k�r en arbetsorder kommer aktiviteten att bindas till den maskinens f�r�lder.
377	2016-12-06	eTouch	15.2.173 - Justering i SF129	JB
			Specialfunktionen 129, Anslagstavla : OP-text har justerats s� att den nu �ven visar material.
375	2016-12-05	Client	15.2.173 - Urval i Interna Aktiviteter	JH
			N�r man startar Interna Aktiviteter fr�n klienten eller eTouch kan man nu ej l�ngre �ndra vilka maskiner och typer som ska visas. Detta g�rs fr�n Administrationsverktyget i Klienten under Interna Aktiviteter -> Maskiner
376	2016-12-05	Client	15.2.173 - Val av interna aktiviteter	JH
			Kolumner i valet av Interna Aktiviteter visas �ven om inga aktiviteter finns. Observera att om man ej har ett urval visas inga kolumner.
374	2016-12-02	eTouch	15.2.172 - Justering i gr�nssnitt	JB
			Under vissa omst�ndigheter kunde visa knappar i eTouch vara tillg�ngliga felaktigt n�r Material-knappen anv�ndes. Det �r nu justerat.
372	2016-11-30	eTouch	15.2.171 - �ndring i SF129	JB
			SF 129 har �ndrats s� att material till vald, nu k�rande order, visas som standard.
373	2016-11-30	Client	15.2.171 - Urval av Interna Aktiviteter	JH
			N�r man �ppnar Interna Aktiviteter p� klienten �ndras urvalet beroende p� vilken maskin man valt i �versikten.
371	2016-11-28	eTouch	15.2.169 - Historiska ordrar eTouch	JB
			Vid rapportering fr�n Historiska ordrar g�rs nu ett korrekt tillbakahopp efter omr�kning av statistik. Vid makulering av material laddas listan om.
370	2016-11-25	Client	15.2.165 - Urval av Interna Aktiviteter	JH
			I Balthzar kan man nu v�lja vilka maskiner och typer man vill se i Interna Aktiviteter. De maskiner/typer man valt p� eTouch kommer �ven eTouch att varna f�r.
369	2016-11-22	eTouch	15.2.169 - Historiska ordrar eTouch	JB
			Historiska ordrar-formul�ret i eTouch har gjorts om till ett mer estetiskt och funktionellt gr�nssnitt.
368	2016-11-18	eTouch	15.2.168 - Orderstart/stopp med Pyramid	JB
			Vissa Pyramid-specifika egenheter som kunde intr�ffa vid start/stopp av order i eTouch har justerats.
367	2016-11-17	eTouch	15.2.167 - Direktkoppling Pyramid	JB
			Prestanda har f�rb�ttrats d� order 2 och fram�t startas vid direktkoppling till Pyramid fr�n eTouch.
364	2016-11-14	Client	15.2.165 - Produktionsrapport olika enheter	JH
			Produktionsrapport olika enheter har justerats.
365	2016-11-14	eTouch	15.2.166 - Pallflagga Pyramid	JB
			Varianter av pallflagga kan nu skrivas ut om Pyramid anv�nds som aff�rssystem. Ny SF (150) tvingar angivelse av signatur vid utskrift av pallflagg.
362	2016-11-08	eTouch	15.2.164 - Makulera rest i Pyramid	JB
			Ny funktionalitet f�r att makulera rest n�r eTouch �r kopplat mot Pyramid har lagts till.
361	2016-11-08	Client	15.2.163 - Verifiera text i Interna Aktiviteter	JH
			I Interna Aktiviteter kan man nu verifiera att en angiven obligatorisk text antingen �r en artikel eller en arbetsorder.
359	2016-11-01	eTouch	15.2.162 - Varningar i eTouch	JB
			N�r varningar visas i eTouch, s� f�rsvann de inte om skift sl�r �ver till 0. Det g�rs nu.
360	2016-11-01	eTouch	15.2.162 - Nedr�kning av stopporsak	JB
			Under vissa omst�ndigheter kunde nedr�kningen ist�llet r�kna upp�t ist�llet f�r ned�t. Det �r nu �tg�rdat.
358	2016-10-31	Client	15.2.161 - Visning av PDF i Interna Aktiviteter	JH
			F�rb�ttrat tvingad visning av PDF i Interna Aktiviteter
357	2016-10-26	eTouch	15.2.161 - P�g�ende ordrar, eTouch	JB
			Listan �ver p�g�ende ordrar i eTouch har nu bytts ut mot en tabell, vilket eliminerar den tidigare begr�nsningen p� visningen av 8 samtidiga ordrar.
354	2016-10-25	Client	15.2.161 - Tid och klientens �versikt	JH
			�tg�rdat problem med att vissa celler �r blanka i klientens �versikt n�r tid av format HH:mm visas.
352	2016-10-21	eTouch	15.2.161 - S�k order	JB
			S�k order funktionen har ut�kats s� att flera ordrar kan startas samtidigt. Vissa inst�llningar kan dock f�rhindra att detta kan g�ras p� specifika maskiner, se dokumentationen.
353	2016-10-21	eTouch	15.2.161 - Skanna basrulle	JB
			Vissa delfunktioner i anpassningen Skanna basrulle har inte fungerat som avsett, vilket nu �r korrigerat.
350	2016-10-19	eTouch	15.2.160 - F�rstabitskontroll	JB
			I eTouch tog det i vissa fall l�ng tid att godk�nna f�rstabitskontrollen. En optimering har gjorts som till viss del minskar denna tid.
348	2016-10-18	eTouch	15.2.159 - �terutskrift pallflagga, st�rre urval	JB
			I �teruskrift pallflagga har nu tv� knappar lagts till som g�r det m�jligt att ut�ka standardintervallet 10 dagar till 30 eller 365 dagar.
349	2016-10-18	eTouch	15.2.159 Kvittera stopp	JB
			Om Kvittera stopp-rutan var uppe n�r stopporsak satts fr�n ett annat h�ll �n eTouch, s� f�rsvann tidigare inte denna ruta. Det g�rs nu.
347	2016-10-06	Client	15.2.158 Artikel i Smart Guide	JH
			N�r man startar en pausad order i Smart Guide visas nu vilket artikelnummer som k�rdes.
346	2016-10-06	Client	15.2.158 Stopplista	JH
			Rapport stopplista visar nu artikel som k�rdes n�r stoppet intr�ffade.
344	2016-10-05	eTouch	15.2.158 - Ny SF 147	JB
			SF 147 - "V�nta med st�lltidsbild efter orderstart" har tillkommit. Denna SF avvaktar med att visa st�llbilden i eTouch efter orderstart, s� att ny order kan startas direkt.
345	2016-10-05	eTouch	15.2.158 - Ny SF 148 Hindra orderavslut ...	JB
			En ny specialfunktion, "148 - Hindra orderavslut utan materialuttag", har tillkommit. Denna SF blockerar m�jligheten att avsluta en order i eTouch och inte flaggan ok_to_finish_order �r satt p� orderraden.
343	2016-10-05	Client	15.2.158 - St�lltidskod	JB
			I admin kunde man inte blanka ut vald st�lltidskod om man en g�ng satt en s�dan. Valet Inget �r nu tillagt.
342	2016-10-04	Client	15.2.157 System meddelande	JH
			Om man har aktiverat att man vill se system meddelanden kan man nu i klienten f� information om t.ex. driftst�rningar.
339	2016-09-30	Client	15.2.156 - Historik i Interna Aktiviteter	JH
			Man kan nu direkt fr�n Interna Aktiviteter f� upp historik p� den valda maskinen och ordern.
341	2016-09-30	Client	15.2.156 - Artiklar 2	JH
			Under artiklar 2 kan man nu se hur m�nga Interna aktiviteter av olika statusar som utf�rts.
340	2016-09-30	Client	15.2.156 - Text input till Interna Aktiviteter	JH
			I checklista f�r Interna Aktiviteter kan man nu v�lja "Text - frivillig" och "Text - obligatorisk" som input.
338	2016-09-27	Client	15.2.156 - Ja/Nej utan avvikelse	JH
			Nu finns en ny typ av input i interna aktiviteter d�r anv�ndaren ej kommer bli tillfr�gad att ange en avvikelse om han svarar nej p� en Ja/Nej fr�ga.
336	2016-09-27	eTouch	15.2.156 - Ny SF, Verktygslista	JB
			Ny specialfunktion, SF 145, har tillkommit, som g�r det m�jligt att i eTouch visa verktygslistan fr�n Monitor f�r vald operation.
337	2016-09-27	Client	15.2.156 Produktionsrapport maskin	JH
			De 5 st�rsta avvikelserna i Produktionsrapport maskin tar nu h�nsyn till vald artikel.
335	2016-09-23	Scheduler	15.2.155 - Mail	JH
			Schemal�ggaren kan nu skicka meddelanden via e-Mail till anv�ndare.
334	2016-09-22	eTouch	15.2.154 - Smartslide i eTouch	JB
			N�r smartslides anv�ndes i eTouch med SQL-taggen <%machine_id%> fungerade detta inte tidigare. Det g�r det nu.
333	2016-09-22	Client	15.2.154 - Smart Guide	JH
			Instruktionen Validate Confirmation f�rsvinner nu korrekt n�r den �r utf�rd.
332	2016-09-21	Client	15.2.153 - Tidsspann	JH
			Man kan nu v�lja flera tidsspann vid rapportgenerering d�r slutdatum l�ggs dagen efter.
329	2016-09-21	eTouch	15.2.153 - Prestanda i SF74 - s�k order	JB
			Prestandan i SF74 har tidigare varit bristf�llig d� s�kformul�ret ska visas om mer �n 500 ordrar visas. En optimering har gjorts som g�r att formul�ret visas snabbare, och d�rmed ocks� snabbare kan anv�ndas.
330	2016-09-21	Client	15.2.153 - Val av balthzar server i klienten	JH
			N�r man loggar in i klienten kan man nu v�lja vilken balthzarserver man ska ansluta mot.
331	2016-09-21	Client	15.2.153 - Val av processv�rden i livedata visning	JH
			Man kan nu ange om ett processv�rde ska kunna visas i livedata visningen.
327	2016-09-20	eTouch	15.2.153 - Prioritetskoder planerade ordrar eTouch	JB
			eTouch kunde tidigare inte hantera prioritetskoder med 4 tecken, vid visningen av planerade ordrar. Det �r nu r�ttat.
323	2016-09-16	Client	15.2.153 - F�rb�ttringar	JH
			I klienten finns det m�jlighet att registrera f�rb�ttringar man utf�rt p� maskin, avdelning, zon, kategori eller verktyg.
326	2016-09-16	Client	15.2.153 - Egna pivot/graf �versikter	JH
			I klienten kan man nu st�lla egna SQL fr�gor och f� svaret presenterat i en pivottabell som �r bunden till en graf.
324	2016-09-16	Client	15.2.153 - SF107 utskrift	JH
			�tg�rdat problem med att utskrift av pallflagga med special funktion 107 ej alltid fungerade.
322	2016-09-15	eTouch	15.2.153 Justering av SF 119	JB
			Vid anv�ndning av SF 119 kunde tidigare varningen f�rsvinna under vissa omst�ndigheter, trots att den var aktiv. Det �r nu r�ttat.
321	2016-09-12	eTouch	15.2.152 - �ndringar i TAK underlag till Excel 2	JB
			Till�gg av urval av klockslag, f�r att b�ttre hantera dygnsbryt.
325	2016-09-10	Client	15.2.151 Smart Guide och Vision	JH
			Smart Guide har nu st�d f�r visionteknologi
318	2016-09-06	web	15.2.150 Optimering i OPC-connectorn	JH
			I vissa s�llsynta situationer kan OPC-connectorn sluta att fungera. En s�dan situation �r �tg�rdad.
319	2016-09-06	eTouch	15.2.151 - Justering av SF 120 till�gg av SF 142	JB
			SF 120 �r justerad s� att den inte kan anv�ndas om inte en f�reg�ende operation k�rts. SF142 Hindra orderstart om f�reg�ende ej startad har lagts till
317	2016-07-14	eTouch	15.2.149 - �ndring i batchhantering	JB
			Batchhanteringsrutinen i eTouch har justerats f�r att bli mer feltolerant.
315	2016-07-11	eTouch	15.2.148 - �ndring i batchhantering	JB
			N�r pallflagga skrivs ut och batch-hantering anv�nds loggas numera �ven rapportnummer och artikelnummer.
316	2016-07-11	eTouch	15.2.148 - Visa stopporsak	JB
			I eTouch kunda man tidigare f� problem om man ville visa stopporsaker som inte fanns upplagda som maskinknutna, n�r denna funktion anv�ndes. Det �r nu r�ttat.
312	2016-07-07	eTouch	15.2.145 - Mindre �ndringar utskrift av pallflagga	JB
			N�r vissa specialfunktioner kombineras kunde det tidigare uppst� problem vid utskrift av pallflagga. Ett s�dan scenario �r nu identifierat och r�ttat.
313	2016-07-07	eTouch	15.2.146 �ndring i s�ndning av UDP-paket	JB
			N�r UDP paket skickas fr�n eTouch gjordes detta tidigare felaktigt, vilket nu �r r�ttat.
314	2016-07-07	eTouch	15.2.147 - �ndring i hanteringen av varningar	JB
			Hanteringen av varningar av olika slag i eTouch har �ndrats s� att de samspelar med varandra b�ttre.
311	2016-07-01	eTouch	15.2.144 - Admin av Maskinspecifika stopporsaker	JB
			I denna funktion kunde listan med maskiner laddas dubbelt om man valde funktionen upprepade g�nger. Det �r nu r�ttat.
310	2016-06-30	eTouch	15.2.144 - Filhantering, kategori	JB
			En r�ttning i administrationen av Filarkivet d�r kategorier hanterades, har gjorts. N�r bara en kategori anv�ndes togs inte denna bort ur listan efter radering, vilket nu �r r�ttat.
307	2016-06-29	eTouch	15.2.144 - Nya specialfunktioner	JB
			Nya specialfunktioner, 139 Pallflagga - enbart ange prima antal och 140 Ange datum vid utskrift av pallflagga, har tillkommit. F�r n�rmare beskrivning se senaste dokumentationen.
305	2016-06-28	Client	15.2.143 - interna aktiviteter i artiklar 2	JH
			I artiklar 2 kan man nu se vilka interna aktiviteter som har utf�rts under olika k�rningar.
306	2016-06-28	Client	15.2.143	JH
			Ny kolumn i produktionsrapport maskin som visar F�rbrukat prima kilogram.
302	2016-06-22	Client	15.2.142 - Plannerade ordrar i client	JH
			N�r man registrerar/redigerar planerade ordrar i klienten s� kan man ej ange maskin l�ngre. Detta val g�rs ist�llet fr�n en lista.
303	2016-06-22	Client	15.2.142 - Artiklar 2	JH
			�tg�rdat att felaktig Verklig st�lltid och Totalt planerad tid visats.
300	2016-06-21	Attention	15.2.141 Kundunika justeringar i Attention-bilder	JB
			Justeringar har gjorts f�r i Gjuteritekniks kundspecifika slidetyper 23-26
301	2016-06-21	Client	15.2.142 - Processv�rden i admin	JH
			Processv�rden i admin har flyttats till en egen meny.
299	2016-06-20	Client	15.2.140 OPC-Connector	JH
			Larm hantering p� OPC-connector har f�rb�ttrats. Man kan nu best�mma hur ofta larm f�r s�ttas samt om larm ska s�ttas n�r maskin ej k�rs.
297	2016-06-17	Attention	15.2.138 - �ndringar i Attention f�r GT	JB
			�ndringar g�llande inneh�llet i Gjuteritekniks slides har gjorts enligt spec. f�r detta.
298	2016-06-17	Client	15.2.139 - Administration av Smart Guide	JH
			Administrationen av Smart Guide instruktioner har f�rb�ttrats.
296	2016-06-16	Client	15.2.138 - Smart Guide	JH
			Denna version inneh�ller tv� nya instruktioner som g�r att anv�ndaren varnas och kan ej g� vidare medans ett OPC v�rde �r lika med eller skilt fr�n ett angivet v�rde.
295	2016-06-14	Client	15.2.137 - Produktionsrapport kilo per timme	JH
			En ny excel-baserad rapport finns i denna version som visar producerat antal i kilo per timme.
294	2016-06-07	eTouch	15.2.136 - Balthzar filarkiv	JB
			En funktion f�r att spara filer i databasen h�ller p� att utvecklas, och kommer gradvis att fasas in i systemet, detta f�r att l�sa problem med fil�tkomst i olika scenarion. Gr�nssnitt f�r denna hantering har lagts till.
293	2016-06-03	eTouch	15.2.136 - Text till p�g�ende stopp	JB
			Under vissa omst�ndigheter kunde eTouch hamna i ett l�ge d�r text till p�g�ende stopp inte kunde uppdateras korrekt, vilket nu �r justerat.
292	2016-06-01	eTouch	15.2.135 - Ny SF, varning om kompis i st�ll	JB
			En ny specialfunktion 136 har lagts till som varnar om den maskin som �r kompis till aktuell, st�r i st�ll.
291	2016-05-30	Client	15.2.134 Smart Guide	JH
			Inneh�ller en st�rre uppgradering och optimering av Smart Guide. Detta inkluderar b�de f�r k�rning av ordrar samt programmering av instruktioner.
290	2016-05-27	eTouch	15.2.133 - Sparade inst�llningar i eTouch	JB
			Sparade inst�llningar i eTouch kunde tidigare f�rsvinna utan synbar anledning. En �tg�rd som f�rs�ker �tg�rda detta �r gjord i denna version.
289	2016-05-27	eTouch	15.2.132 - Justering SF133/SF134	JB
			Ovanst�ende specialfunktioner har f�tt sm�rre �ndringar gjorda som b�r �ka anv�ndarv�nligheten. Information om kvittens av larm, �ndrat urval av larm som kopplas till kassation har lagts till.
287	2016-05-24	Client	15.2.132 - Processv�rdesgr�nser	JH
			En st�rre uppgradering av OPC connector d�r man nu kan anv�nda processv�rdesgr�nser samt ber�kna Cpk/Cp v�rden av processv�rden.
286	2016-05-23	eTouch	15.2.131 - Justering i Attention	JB
			Logiken som avgjorde om order skulle betraktas som sen eller tidig i f�rh�llande till ber�knat f�rdigdatum i Attentions symbol f�r Leveransstatus �r nu justerad.
284	2016-05-20	eTouch	15.2.130 Specialfunktion 132	JH
			Diverse korrigeringar av Specialfunktion 132 Skanna Basrulle
282	2016-05-13	eTouch	15.2.128 - Korrigeringar i funktionen skanna basru	JB
			Funktionen har justerats s� att man kan komma direkt till signaturen om man anser att skannad basrulles kvalitet �r OK. St�d f�r avrs1-4 samt ds och fs har �ven implementerats.
283	2016-05-13	eTouch	15.2.128 - Korrigeringar i SF129	JB
			SF129 har justerats till att b�ttre passa anv�ndaren genom diverse mindre utseendem�ssiga f�r�ndringar
280	2016-05-10	eTouch	15.2.127 - Ny specialfunktion	JB
			Specialfunktion 132 Skanna basrulle har tillkommit
281	2016-05-10	Client	15.2.128 - Verifiering av anv�ndare	JH
			Interna aktiviteter tar nu h�nsyn till vilket aff�rssystem som anv�nds n�r anv�ndare verifieras.
275	2016-04-29	Client	15.2.126 Produktionsrapport maskin	JH
			Produktionsrapport maskin �r nu uppdelad i en sektion f�r varje f�r�lder. Man kan �ven v�lja vilka underrapporter man vill skapa. Har bytt urvalet av verktyg till artikel ist�llet.
276	2016-04-29	Scheduler	15.2.126 - Spamfilter i schemal�ggaren	JH
			Schemal�ggaren kommer nu ej l�ngre skicka flera felmeddelanden d� ett fel uppst�r.
278	2016-04-29	eTouch	15.2.126 - �ndring i Ladda etikett-funktionen	JB
			Om Ladda etikettfunktionen �r aktiverad p� maskinen, s� g�rs nu ett automatiskt anrop till till denna funktion vid orderstart i eTouch.
279	2016-04-29	eTouch	15.2.126 - Felaktig ber�knad planerad hastighet	JB
			Vid orderstart av en order i eTouch med flera insatser kunde den planerade hastigheten ber�knas fel under vissa omst�ndigheter. Det �r nu r�ttat.
274	2016-04-28	Client	15.2.125 - Felaktig kvarvarande tid	JB
			P� maskiner som inte k�r n�gon order visades tidigare ett felaktigt v�rde f�r kvarvarande tid p� order samt ber�knad f�rdigtidpunkt. Det �r nu �ndrat till att ist�llet vara blankt.
272	2016-04-25	eTouch	15.2.125 - Skanna basrulle SF132	JB
			Specialfunktion utvecklad f�r Mets� Tissue.
270	2016-04-20	Client	15.2.124 Interna Aktiviteter	JH
			Fliken event �r �terigen aktiverad i admin.
271	2016-04-20	Client	15.2.124 Interna Aktiviteter	JH
			Fixat s� att schemal�ggaren tar h�nsyn till authentication mode n�r den schemal�gger. �ven �tg�rdat diverse �vers�ttningar.
267	2016-04-19	eTouch	15.2.124 - Beh�ll stopptext	JB
			N�r historiska stopp redigerades tidigare f�rsvann alltid texten som h�rde till dessa. En ny specialfunktion (130) har tagits fram som g�r att dessa beh�lls.
269	2016-04-19	eTouch	15.2.124 - Verifiering av orderavslut	JB
			Ny specialfunktion (131) har tillkommit som fr�gar anv�ndaren om man �r s�ker p� att ordern ska avslutas i eTouch n�r s� sker. Svarar man Nej avbryts orderavslutet.
266	2016-04-19	Client	15.2.124 Interna aktiviteter	JH
			N�r man utf�rde en intern aktivitet med en PDF kunde ett meddelande dyka upp som felaktigt sa att PDF:en ej kunde laddas. Detta �r nu �tg�rdat.
268	2016-04-19	eTouch	15.2.124 - Text till p�g�ende stopp	JB
			Tidigare kunde man inte uppdatera stopptexten p� ett p�g�ende stopp, vilket nu �r m�jligt.
263	2016-04-18	eTouch	15.2.124 - Visa operationstext	JB
			Ny specialfunktion (129) har tillkommit som visar p�g�ende operation/ers operationstext/er i en ruta som l�gger sig �ver planerade ordrar i eTouch.
265	2016-04-18	Client	15.2.124 Produktionsrapport maskin	JH
			N�r man genererar Produktionsrapport maskin kan man nu �ven v�lja verktyg. Utr�kningen f�r verkningsgrad i rapporten har �ven korrigerats.
262	2016-04-15	eTouch	15.2.123 - Justeringar i sp�rbarhetshantering	JB
			En justering av sp�rbarhetshanteringen �r gjord som g�r att den b�r fungera mer som det �r t�nkt.
261	2016-04-12	Client	15.2.123 - Smart guide	JH
			En ny tag i form av CYCLE_COUNTER och TEXT_CONFIRMATION �r tillagd i Smart guide. Detta ger m�jlighet att be anv�ndaren ange en text var x:de cykel.
264	2016-04-10	eTouch	15.2.122 - Interna aktiviteter fr�n eTouch	JH
			Interna aktiviteter fr�gar inte l�ngre efter inloggning n�r funktionen anv�nds fr�n eTouch. Detta hanteras numera via admin p� aktiviteten.
260	2016-04-08	eTouch	15.2.121 - Inmatning av text vid stopporsak	JB
			N�r text till stopporsak angavs i eTouch fungerade inte tangetbordet p� sk�rmen som man kunde f�rv�nta sig. Det �r nu r�ttat.
258	2016-04-07	Client	15.2.121 - Smart guide meddelanden	JH
			Meddelanden i Smart Guide �r nu anpassade efter ett touch gr�nssnitt.
257	2016-04-06	Client	15.2.121 - Adminsitration f�r maskiner	JH
			Fixat problem som kunde uppst� i administrationsverktyget f�r maskiner n�r man angav , som decimalkomma.
255	2016-04-05	Client	15.2.121 - Provessv�rdesanalys	JH
			Problem som kunde uppst� vid val av processv�rden �r �tg�rdade.
256	2016-04-05	eTouch	15.2.121 - Ut�kad funktion SF95	JB
			N�r specialfunktion 95 anv�nds (Automatisk stopporsak vid gruppval), ges nu m�jlighet att visa hj�lptext till stopporsaken som v�ljs per automatik d� gruppen v�ljs.
251	2016-04-04	Client	15.2.120 - F�rger i live data	JH
			Live data har tillg�ng till fler f�rger f�r utritning av linjer.
252	2016-04-04	Client	15.2.120 - Interna aktiviteter typer	JH
			Koden f�r Utf�rs externt �r nu tillagd.
253	2016-04-04	eTouch	15.2.120 - Interna aktiviter och SF128	JH
			Om specialfunktion 128 �r aktiv kommer interna aktiviteter att skippa verifiering av anv�ndare.
254	2016-04-04	Client	15.2.120 - Interna aktiviteter	JH
			Diverse f�rb�ttringar av interna aktiviteter finns i denna version.
250	2016-03-31	eTouch	15.2.119 - Justering vid orderstart	JB
			N�r antalet insatser anges i eTouch vid orderstart, kunde man av misstag r�ka trycka tv� g�nger, och d� starta ordern tv� g�nger. Detta �r nu f�rhindrat.
249	2016-03-29	eTouch	15.2.117 - �ndring av filnamn i NiceLabel	JB
			Filnamnet som skrivs i filen till programmet NiceLabel har �ndrats, f�r att ta h�nsyn till ny standard.
247	2016-03-24	Client	15.2.115 - Planerade ordrar	JH
			Korrigerat hur �ndring av avslutad arbetsorder fungerar. Inneh�ller �ven den senaste versionen av Livedata-visningen.
248	2016-03-24	eTouch	15.2.116 - Ladda etikett	JB
			Funktionen Ladda etikett har f�tt nya ledtexter, enligt ny standard. Presentationen av antalet i kassationslistan visas nu med max 2 decimaler.
246	2016-03-23	eTouch	15.2.114 - Ny SF Sp�rra verktyg	JB
			I denna version har det lagt till st�d f�r en ny specialfunktion som visar en symbol i listan �ver planerade ordrar i eTouch, om artikeln �r sp�rrad. Visningen av okodade/kodade stopp �r justerad s� om tidsskillnad finns tas detta h�nsyn till.
245	2016-03-17	eTouch	15.2.113 - Justering av varning och anslagstavla	JB
			Varningar visades inte korrekt d� SF119 anv�ndes samt SF88 Anslagstavla visades tidigare med f�r kort intervall, vilket nu �r korrigerat. Procentuellt f�rbrukad tid i eTouch visades tidigare inte om planerad st�lltid var 0.
244	2016-03-16	Client	15.2.111 Produktionsrapport maskin	JH
			Produktionsrapport maskin visar nu �ven Ej produktions tid. Live-data visningen har �ven f�tt en uppgradering.
243	2016-03-15	Client	15.2.110 - Planerade ordrar, IFS	JB
			Justering i funktionen f�r visning av kommande planerade ordrar i Client d� direktkoppling till IFS anv�nds.
242	2016-03-14	eTouch	15.2.109 - �ndring SF79	JB
			�ndring gjordes g�llande hur SF79 tilldelar nya processv�rden i eTouch, samt vilka f�lt som visas.
240	2016-03-10	eTouch	15.2.108 Justering SF119	JB
			SF119 (Varna vid stopp) har justerats, s� att funktionen beter sig mer som f�rv�ntat vid varning om okodade stopp.
241	2016-03-10	Client	15.2.107 Interna Aktiviteter	JH
			En stor uppdatering som r�r interna aktiviteter. Man kan nu schemal�gga p� event, dvs. n�r man startar/avslutar en tillverkningsorder och n�r f�rsta bits kontroll �r klar. Det g�r �ven att schemal�gga p� flera val, t.ex. avdelning, kategori, zon och verktyg. Verktyget f�r att utf�ra aktiviteter har �ven uppgraderats.
239	2016-03-07	Attention	15.2.105 - Justeringar i Attention	JB
			Ett par korrigeringar har gjorts g�llande hur SmartSlides visar m�tare. Till�gg av antal decimaler som visas i dessa, samt hur de visas i SmartFyrpack.
151	2016-02-15	Client	16.1.0 OPC Connector larm	JH
			OPC Connectorn kan nu s�tta p� och st�nga av larm beroende p� OPC-v�rden.
236	2016-02-04	Client	15.2.101 - Korrigering av avslutade arbetsordrar	JH
			I klienten kan man nu �ndra i avslutade arbetsordrar. Man kan �ven �ndra mellan vilka tidpunkter som ordern k�rdes.
235	2016-02-02	eTouch	15.2.98 - 99 �ndringar och ny SF	JB
			�ndring i hur eTouch sk�ter pluggningar, s� att det g�rs p� samma s�tt som i 15.2.97. Justering i rutinen som startar om order vid pluggning. Ny specialfunktion 126, Endast egna stopp i stopphistorik.
226	2016-02-01	Client	15.2.97 - Pluggning av insatser	JH
			Uppdaterat hur klienten pluggar insatser.
224	2016-01-29	Client	15.2.95 - Livedatavisning	JH
			Livedata visningen kan nu visa processv�rden fr�n flera maskiner. Prestandan vid flera processv�rden har ocks� f�rb�ttrats.
225	2016-01-29	Client	15.2.96 - TAK-rapport avdelning och maskin	JH
			�tg�rdat ett problem som kan uppst� n�r man genererar en snabbrapport f�r TAK i klienten.
223	2016-01-28	eTouch	15.2.89 - 94 Mindre korrigeringar	JB
			Justering av visningen av f�rstabitskontrollen. Korrigering av hur texten i p�g�ende stopp uppdateras, med h�nsyn till ny funktion f�r nedr�kning av tid p� stopporsak.
222	2016-01-26	Client	15.2.88 - Produktionsrapport maskin	JH
			Produktionsrapport maskin st�der nu val av skift.
220	2016-01-25	eTouch	15.2.86 - Korrigering rapportering fg op	JB
			Rapportering mot f�reg�ende operation orsakade tidigare i vissa Monitor-versioner att operationen omplanerades. Detta �r nu korrigerat.
221	2016-01-25	eTouch	15.2.85 - Nya specialfunktioner	JB
			SF 123, Kassation i kg och SF 124 Alltid kassation mot f�reg�ende operation har lagts till
219	2016-01-19	eTouch	15.2.84 Sm�rre justeringar	JB
			Block�versikt - F�rgkodning av datum beroende av status Varna vid stopp - Felaktig rubrik visades n�r varning visades �versikt i eTouch - Numera visar rubriken vad avdelningen heter som visas Orderstart med blockvisning - Hopp till blockvisning g�rs numera ej direkt efter orderstart Avsluta order - N�r avsluta order v�ljs i eTouch m�ste numera order v�ljas, �ven om endast en k�rs.
218	2016-01-19	eTouch	15.2.82 Gr�nssnittsjustering f�r SF88	JB
			N�r specialfunktionen 88 (Anslagstavla) anv�nds, s� justerades tidigare inte gr�nssnittet n�r f�nsterstorleken �ndrades, vilket nu �r �ndrat.
209	2016-01-14	eTouch	15.2.72 - Ny SF, r�ttning Attention	JB
			Tillagt st�d f�r SF121, r�ttning i Attention g�llande hur fyrpack hanteras.
210	2016-01-14	eTouch	15.2.73 �ndring i SF115	JB
			�ndring i SF115, s� att ledtexten visar vad som �r vald enhet d� kassation g�rs.
211	2016-01-14	eTouch	15.2.74 Justering SF 120	JB
			Mindre justeringar g�llande SF120, Kortrulle.
212	2016-01-14	Client	15.2.75 Ny rapport	JH
			Lagt till Produktionsrapport olika enheter.
213	2016-01-14	eTouch	15.2.76 och 15.2.77 - Justeringar i Blockvisning	JB
			Justering g�llande sparning av inst�llningar i blockvisning. Material, antalsrapportering och kassationsrapportering g�r inte l�ngre kunna n� via formul�ret f�r att undvika oklarheter ang�ende vilken order som �r vald.
214	2016-01-14	eTouch	15.2.78 R�ttning SF 109	JB
			R�ttning i SF109 g�llande byte till maskin som inte har SF aktiverad (rutorna f�r pallflagga l�g d� kvar).
215	2016-01-14	eTouch	15.2.79 �ndring i SF114	JB
			�ndring av SF114, s� att grid-inst�llningar inte �r maskinberoende, utan g�ller f�r alla maskiner som anv�nder denna SF.
216	2016-01-14	eTouch	15.2.80 R�ttning splitt pallflagga	JB
			�ndring i Splitt pallflagga s� att utskrifter sker som det �r t�nkt.
217	2016-01-14	eTouch	15.2.81 Justering i SF121	JB
			Vid utskrift av pallflagga via SF 121 separeras numera artikelnummer och artikelbeskrivning, vilket inte gjordes tidigare.
207	2016-01-11	Client	15.2.71 - Justera tabeller	JH
			Nu finns det m�jlighet att justera font, textstorlek, datatyp och format i tabeller.
208	2016-01-11	Client	15.2.75 - Produktionsrapport olika enheter	JH
			Nu finns det en ny rapport, Produktionsrapport olika enheter, som visar en �versikt �ver produktionen i olika f�rbest�mda enheter. T.ex. Kilogram, meter och styck.
206	2016-01-07	eTouch	15.2.72 - Nya specialfunktioner samt r�ttning	JB
			SF 121 och 122 har lagts till. R�ttning i Attention g�llande hur fyrpacks-komponenten anv�nds.
205	2016-01-04	eTouch	15.2.70 Till�gg av specialfunktioner	JB
			Till�gg av SF117, Alternativ formattering av tid, st�ll SF118, val av skrivare vid utskrift fr�n eTouch. SF119, Varna vid stopp SF120, Rapportera kortrulle
204	2015-12-15	eTouch	15.2.68 - R�ttning av pluggning och SF117	JB
			N�r insatser pluggas i eTouch, s� startas den aktiva order om. Vid denna omstart gick viss data f�rlorad, vilket nu �r r�ttat. Specialfunktionen 117 �r tillagd, som ger m�jlighet att visa st�lltid som hh:mm ist�llet f�r hundradels timmar.
203	2015-12-11	eTouch	15.2.67 - Visning av data i TO-bild	JB
			Tidigare visades [T]AK och TAK-v�rden i Tillverkningsorderbilden endast om en order k�rdes. Dessa visas nu ovillkorligen, �ven om inte order k�rs. Prima antal som visas i kassationsbilden visade tidigare fel siffra, vilket nu �r r�ttat.
202	2015-12-07	eTouch	15.2.63 - Rapportering i alternativ enhet	JB
			Specialfunktionerna 115 och 116 har lagts till, som g�r det m�jligt att rapportera i kassation respektive prima antal i alternativ enhet
200	2015-12-04	eTouch	15.2.61 - Historik f�r SF99	JB
			N�r specialfunktion 99 anv�ndes kunde historiken inte visas korrekt, vilket nu �r r�ttat.
201	2015-12-04	eTouch	15.2.60 - Decimaltal i historiken	JB
			Historiken f�r rapporterat/kasserat antal kunde tidigare inte visa decimaltal, vilket nu �r r�ttat.
199	2015-12-02	eTouch	15.2.59 - Decimaltal som antal och ny symboltyp	JB
			Tidigare kunde inte decimaltal rapporteras som antal, varken i godk�nt antal eller kassationer. En ny symboltyp har lagts till som visar leveransstatus i Attention.
198	2015-11-30	eTouch	15.2.57 - Rapporterat f�reg�ende operation	JB
			eTouch visade tidigare 0 som rapporterat p� f�reg�ende operation f�r p�g�ende ordrar samt egen rubrik f�r kasserat antal i eTouch visades inte korrekt. Det �r nu r�ttat.
197	2015-11-27	eTouch	15.2.56 - Till�gg SF99, valfritt antal decimaler	JB
			Ny knapp har lagts till i separat formul�r f�r specialfunktion 99 anv�nds, som g�r det m�jligt att som anv�ndare definiera antalet decimaler som enskilda kolumner visar.
196	2015-11-25	eTouch	15.2.55 - R�ttning SF99	JB
			N�r rapportering av antal och kassation gjordes tidigare via specialfunktion 99, s� fr�gades inte om anst�lld �ven om systemet var konfigurerat s�.
194	2015-11-24	eTouch	15.2.52 - Nya specialfunktioner + r�ttning	JB
			Specialfunktionerna 111,112 och 113 har lagts till. 111 Orderstart enligt k�rplanering 112 Endast start av order 113 Varning manuell �verrapportering R�ttning har gjorts g�llande l�sningen av planerade ordrar f�r specialfunktion 99
195	2015-11-24	eTouch	15.2.53 - R�ttning SF99	JB
			N�r specialfunktion 99 anv�ndes f�r att rapportera antal och kassationer, visades tidigare inte fr�gan om vem som var ansvarig anst�lld f�r kassationen/rapporteringen, om systemet var konfigurerat f�r att g�ra det. Det g�rs nu.
192	2015-11-23	eTouch	15.2.50 - Beordra material	JB
			Till�gg f�r ny specialfunktion (110) som g�r det m�jligt att beordra material via att en intern aktivitet skapas upp.
193	2015-11-23	Client	15.2.51 - Snitt i artiklar	JH
			Fixat en bugg som resulterade i att snittet av stycktiden i artiklar 2 blev fel.
189	2015-11-19	eTouch	15.2.45 - Till�gg av tv� specialfunktioner	JB
			Till�gg av st�d f�r SF 108 och 109, ut�kad batch-verifiering samt split pallflagga.
190	2015-11-19	eTouch	15.2.46 - Admin av SmartM�tare-objekt	JB
			Formul�ret f�r att administrera SmartM�tare-objekt var tidigare f�r stort f�r att visas p� den minsta rekommenderade uppl�sningen (1024*700). N�r nya objekt sparades, sparades inte SQL-fr�gan som var kopplad. Detta �r nu r�ttat.
191	2015-11-19	Client	15.2.48 - Skapa order	JH
			N�r man skapar order fr�n klienten kommer den valda kapacitetsfaktorn att f�lja med.
188	2015-11-18	eTouch	15.2.44 - Maskinunika stopporsaker utan grupp	JB
			N�r maskinunika stopporsaker utan stopporsaksgrupper anv�ndes, s� visades inte den sista stopporsaken enligt sorteringsordningen p� tillagda stopporsaker. Det �r nu r�ttat.
186	2015-11-13	eTouch	15.2.42 - Felaktig fr�ga om text	JB
			N�r stopporsak via grupp anv�nds tillsammans med maskinunika stopporsaker och specialfunktion 95 (Automatisk stopporsak vid gruppval), s� d�k felaktigt inmatningsformul�ret f�r tillh�rande text upp. Det �r nu r�ttat.
187	2015-11-13	eTouch	15.2.43 - SF105 och SF 106	JB
			St�d f�r tv� nya specialfunktioner har implementerats som ger m�jlighet att automatiskt skriva ut etiketter enligt separat regelverk f�r detta, samt frist�ende PDF-dokument.
185	2015-11-12	eTouch	15.2.41 - Max/Min i Attentions fyrpack-slides	JB
			Max och min-v�rden visades ej korrekt i Attention-slides som anv�nder SmartM�tare-komponenten som en del av fyrpack-slides.
183	2015-11-10	eTouch	15.2.38 -SF79 & 98	JB
			N�r SF79 och 98 anv�nds sker nu en loggning d� v�rden uppdateras. I formul�ret f�r 98 visas nu �ven en knapp som kan anv�ndas f�r att justera fontstorlek, samt m�jlighet att spara dessa inst�llningar
184	2015-11-10	Client	15.2.39 Tidszoner och dygnsbryt	JH
			Fixat s� att snabbrapporterna fungerar mellan tidszoner. Har �ven fixat s� att "idag" f�r en maskin tar h�nsyn till n�r maskinens dygn b�rjar. Har �ven lagt till s� att stopporsaker fungerar mellan olika tidszoner. Ut�ver det s� �r n�gra mindre buggar i Interna Aktiviteter fixat.
181	2015-11-06	Client	15.2.34 - Tidskonvertering	JH
			Klienten ska nu hantera skillnader i tidszoner i st�rre utstr�ckning.
182	2015-11-06	Client	15.2.36 - Interna aktiviteter	JH
			Fixat problem d�r interna aktiviteter kunde dyka upp som dubletter. �ven fixat s� att man inte l�ngre beh�ver v�lja maskin n�r man skapar en ny aktivitet f�rutsatt att man st�r p� en. �ven fixat s� att man inte kan �ppna flera inst�llningsf�nster i interna aktiviteter.
179	2015-11-05	eTouch	15.2.32 - SF101 �ndring av orderantal	JB
			Vid start av order via funktionen Start via artikel, s� kan man nu f� orderantalet att justeras efter vad som anges i Artikelinformation 1-f�ltet p� artikeln. (Orginalantalet divideras med angiven faktor.)
180	2015-11-05	Scheduler	15.2.33 - Makulera interna aktiviteter	JH
			Schemal�ggaren kommer nu att makulera interna aktiviteter som �r f�r gamla.
178	2015-11-05	Client	15.2.31 - Skapa interna aktivteter	JH
			Tagit bort s� att man nu inte beh�ver v�lja p� vilken maskin man skapar den interna aktiviteten om man redan valt vilken maskin man �r vid.
176	2015-11-03	eTouch	15.2.29 - SF99, �ndring g�llande val av rad	JB
			N�r SF99 anv�nds kunde vara tveksamt vilken rad som valts.Det har gjorts tydligare. eTouchs Tillverkningsorderbild hade omkastade grafer f�r TAK idag och [T]AK.
177	2015-11-03	Client	15.2.30 - Rapportinst�llningar	JH
			Fixat s� att man inte kan f� upp flera olika f�nster f�r rapportinst�llningar. �tg�rdade �ven en bugg som gjorde det sv�rt att schemal�gga nya rapporter om man tog bort de gamla schemal�ggningarna.
175	2015-11-02	eTouch	15.2.28 - R�ttning f�r SF99	JB
			Specialfunktion 99 har �ndrats s� att rapportering av antal och kassation g�rs via standardformul�r f�r detta. I och med detta har knapparna f�r rapportering tagits bort.
169	2015-10-21	Client	15.2.21 Dygnsbryt	JH
			Transaktioner per dag, vecka och timme har nu st�d f�r maskiner med annan dygnsbryttid �n 00:00. �ven �tg�rdat en bugg som gjorde att transaktionstider kunde visas fel.
172	2015-10-21	eTouch	15.2.22 - Korrekta starttider stopporsaksstatistik	JB
			Starten p� m�nader togs inte fram korrekt i eTouch om alternativt dygnsbrytning anv�ndes, vilket syntes i startistiken �ver stopporsaken f�r innevarande och f�reg�ende m�nad. Detta �r nu r�ttat.
173	2015-10-21	Client	15.2.23 Produktionsrapport maskin	JH
			Produktionsrapport maskin har inte l�ngre decimaler f�r minutvisning. Statistikdelen i produktionsrapport maskin �r nu sorterat utifr�n Maskin ID och Maskin Namn �r tillagt.
174	2015-10-21	Client	15.2.24 Administration av dygnsbrytning	JH
			Administrations av dygnsbrytning fungerar nu oavsett vilken tidszon man befinner sig i.
167	2015-10-20	eTouch	15.2.19 Dygnsbrytning i statistik, skalning	JB
			Om alternativ dygnsbrytning anv�nds, s� tar numera eTouch h�nsyn till detta i de statistikdiagram som visar stopporsaksfrekvens per tidsintervall. Skalningen av knapparna i rapportera antal har tagits bort, d� de blev f�r stora vid maximerad bild i h�g uppl�sning.
168	2015-10-20	eTouch	15.2.20 - Alternativ stycktid	JB
			Specialfunktion 100 har lagts till, som g�r det m�jligt att f� en alternativ stycktid p� ordern som k�rs. �r funktionen aktiverad blir stycktiden ber�knad som planerad stycktid / antal insatser ----- Schemalagd uppdatering av version gjordes tidigare endast d� Tillverkningsorder-bilden visades. Detta �r nu �ndrat till att g�ras om en av ett urval av sidor visas.
166	2015-10-19	Client	15.2.18 Schemal�ggaren k�r inga rapporter	JH
			Fixat en bugg som gjorde att inga schemalagda rapporter skickades.
164	2015-10-16	eTouch	15.2.15 - Felplacerad knapp S�k order	JB
			D� funktionen S�k order anv�ndes blev placeringen p� denna knapp fel, samt sv�vade �ver �vriga sk�rmbilder n�r dessa byttes i eTouch. Det �r nu r�ttat.
165	2015-10-16	Client	15.2.17 Rapporter utomlands	JH
			�tg�rdat en bugg som gjorde att vissa rapporter inte k�rs korrekt d� man befinner sig i en annan tidszon �n servern.
162	2015-10-15	Client	15.2.14 Rapporter	JH
			�tg�rdat en bugg som gjorde att fel tidpunkter visades om tidszonen skiljer sig mellan datorn som k�r klienten och servern. Produktionsrapport maskin �r �ven korrigerad s� att r�tt antal decimaler visas samt tomma f�lt ers�tts med 0.
163	2015-10-15	eTouch	15.2.15 - P�g�ende stopp	JB
			N�r p�g�ende stopp kodades i eTouch kunde man hamna i ett l�ge d�r textrutan som visas p�g�ende stopporsak i eTouch blivit tom direkt efter att man kodat stoppet. Det ska nu vara r�ttat.
155	2015-10-14	Client	15.2.11 Interna aktiviteter typer	JH
			�tg�rdat en bugg som gjorde att interna aktiviteter inte kunde startas om en standard aktivitet inte var vald. Lade �ven till administration av typer.
156	2015-10-14	eTouch	15.2.12 - Tidsf�rskjutning i historik	JB
			Transaktioner som redovisades i eTouchs lista �ver historiska rapporteringar av antal och kassationer visade tidigare inte r�tt tid d� dessa gjordes. Det �r nu r�ttat.
157	2015-10-14	Ststus	15.2.1 Balthzar atatus - dygnsbryt
			I admin maskin finns m�jlighet att s�tta n�r dygnet bryts (tidpunkt). Fr�n och med denna version av Balthzar status s� hanteras detta s� att information i �versikten i client som visas f�r IDAG ber�knas fr�n den tidpunkt som satts som tidsbrytning f�r dag. Det g�ller tex f�r T% idag OEE idag Stoppidag mm.
161	2015-10-14	eTouch	15.2.13 - Tidsf�rskjutning i listor i eTouch	JB
			N�r planerade ordrar visas i eTouch var inte dessa justerade f�r tidsskillnad. Detta g�llde �ven listan med kodade/okodade stopp, vilket nu �r r�ttat.
152	2015-10-13	eTouch	15.2.7 - Gr�nssnitts�ndringar	JB
			Med engelska som spr�k visade eTouch vissa rubriker med m�rklig radbrytning och/eller felaktig l�ngd, speciellt vid minsta m�jliga sk�rmuppl�sning. De fall som f�rekom i Tillverkningsorderbilden i eTouch har blivit r�ttade.
153	2015-10-13	eTouch	15.2.8 - Engelsk rapportering	JB
			Med engelska som spr�k gick det tidigare inte att avsluta ordrar, p� grund av datumhantering med nationella inst�llningar. Det �r nu r�ttat.
154	2015-10-13	eTouch	15.2.10 Nationella inst�llningar - ENG	JB
			Med engelsk spr�kinst�llning visade tidigare eTouch ber�knat f�rdigdatum felaktigt. Numera visas den alltid som mm-dd hh:mi d�r mm=m�nad, dd=dag, hh=timme och mi=minuter
150	2015-10-09	Client	15.2.6 Schemal�ggning av rapporter	JH
			Fixat bugg som gjorde det om�jligt att redigera en redan schemalagd rapport.
148	2015-10-08	Client	15.2.3 Produktionsrapport maskin	JH
			Produktionsrapport f�r maskin h�mtar nu den data som ska visas. Denna rapport �r en kundanpassning och inte avsedd f�r alla kunder.
149	2015-10-08	Client	15.2.4 �versikt variant 2	JH
			Fixat bugg som gjorde att �versikt variant 2 inte skalade korrekt d� fullsk�rm anv�ndes.
147	2015-10-07	Client	15.2.1 Fixat Zoom i Smart Guide	JH
			Fixat en bugg som gjorde att man kunde f� max zoom i Smart Guide
136	2015-09-30	Client	15.2.0 - Hantera processv�rden av d�lig kvalitet	JH
			I OPC Connectorn kan man nu ange vilka v�rden ett OPC Item ska anv�nda sig av d� dess kvalitet �r d�lig.
137	2015-09-30	Client	15.2.0 - Egna datak�llor	JH
			Man kan nu l�gga till egna ODBC datak�llor som man kan k�ra SQL fr�gor mot. Det betyder tex att man kan visa data fr�n sitt aff�rssystem i b�de client, eTouch och attention. F�r att kunna anv�nda detta kr�vs att man har modulen Egna fr�gor samt att man minst en licens av Balthzar attention.
144	2015-09-30	eTouch	15.2.0 - Inl�sning av planerade ordrar	JB
			En prestandaoptimering g�llande inl�sningen av planerade ordrar har gjorts, vilket g�r av vissa l�sningar av sk�rmen undviks.
145	2015-09-30	Client	15.2.0 - Omkopilering av vyer i Monitor	JB
			Efter en uppgradering av Monitor kr�vs ofta en handp�l�ggning av Delacroy f�r att f� Balthzar att fungera. Det finns numera en funktion i Admin i klienten som g�r denna man�ver p� beg�ran av anv�ndaren.
146	2015-09-30	Status	15.2.0 - Uppdatering transaktioner	PL
			Balthzar status som hanterar uppdatering av inkommna transaktioner har f�tt funktionalitet som g�r att den k�nner av den ev k� som finns och anpassar sitt beteende efter detta. Resultatet �r att programmet minskar sin belastning p� databasen med ca 50%
108	2015-09-30	eTouch	15.2.0 - B�ttre hantering av tvingande stopp	PL
			�ndring �r gjord s� att tvingade stopp fungerar b�ttre om man anv�nder funktionen "manuell maskin i balthzar. Tidigare kunde detta leda till felaktig uppdatering av sk�rmen i eTouch.
130	2015-09-30	Client	15.2.0 - Processloggning fr�n client	JH
			Man kan nu kolla p� processloggningen f�r en maskin eller order i klienten.
131	2015-09-30	Client	15.2.0 - Ny schemal�ggnings tid f�r rapporter	JH
			Rapporter kan nu schemal�ggas b�de f�r M�ndag - Fredag och Tisdag - L�rdag.
133	2015-09-30	Client	15.2.0 - Anteckning f�r egna SQL �versikter	JH
			Man kan nu skriva en anteckning till de SQL fr�gorna man skapar.
134	2015-09-30	Client	15.2.0 - Laddningsindikator i egna �versikter	JH
			N�r man i klienten laddar egna �versikter visas nu en indikator medans datan laddas.
135	2015-09-30	Client	15.2.0 - Rapport Uppf�ljning aktiviteter	JH
			Rapporten Uppf�ljning aktiviteter kan nu skapas. Rapporten visar hur de Interna Aktiviteterna i ett givet urval har utf�rts.
118	2015-09-30	eTouch	15.2.0 - SF 97 Kassera hela cykler	JB
			Ny specialfunktion har utvecklats som g�r det m�jligt att kassera x antal hela cykler f�r alla nu aktiva ordrar, med h�nsyn tagen till eventuella pluggningar.
112	2015-09-30	eTouch	15.2.0 - SF 91 Prima antal f�r p�g�ende order	JB
			Ny SF har skapats med nummer 91, som visar prima antal ist�llet f�r inrapporterat antal i eTouchs Tillverkningsorderbild.
113	2015-09-30	eTouch	15.2.0 - SF 92 - Okodade stopp i historiken	JB
			Ny specialfunktion har skapats som g�r att man kan v�lja att visa okodade stopp tillsammans med kodade i listan f�r stopp i eTouch.
114	2015-09-30	eTouch	15.2.0 - SF 93 �ndrat intervall F�rdig-ber�kning	JB
			Ny specialfunktion har skapats som ger m�jlighet att s�tta egen tid f�r hur ofta Ber�knad f�rdig-tiden ska ber�knas.
115	2015-09-30	eTouch	15.2.0 - SF 94 Visa enskild slide	JB
			Ny specialfunktion har skapats som g�r det m�jligt att visa separat SmartSlide fr�n eTouch.
116	2015-09-30	eTouch	15.2.0 - SF 95 Automatisk stopporsak vid gruppval	JB
			Ny specialfunktion har utvecklats som g�r det m�jligt att v�lja stopporsak direkt via gruppval, om gruppen endast inneh�ller en stopporsak.
117	2015-09-30	eTouch	15.2.0 - SF 96 Smartslide som f�rstasida	JB
			Ny specialfunktion har utvecklats som g�r det m�jligt att ha en SmartSlide som sin startsida i eTouch.
121	2015-09-30	Client	15.2.0 - Ta bort maskiner i klienten	JH
			Man kan nu ta bort en maskin i administrationsverktyget i klienten. Detta tar �ven bort sparad status om maskinen.
123	2015-09-30	Client	15.2.0 - Egen SQL med input taggar	JH
			Man kan nu skapa SQL-fr�gor med input taggar, av typen <?[datatyp]?Meddelande?[datatyp]?>. N�r sedan SQL fr�gan k�rs kommer anv�ndaren att fylla i de input taggarna. Detta g�r att samma fr�ga kan ge olika resultat beroende p� vad anv�ndaren anger.
124	2015-09-30	Client	15.2.0 - �ppna flera Smartslides samtidigt	JH
			Man kan nu �ppna flera Smartslides samtidigt. Detta underl�ttar om man vill j�mf�ra v�rden p� tv� stycken.
125	2015-09-30	Client	15.2.0 - Smartslides	JH
			Man kan nu �ppna de slides man skapat f�r attention i klienten.
127	2015-09-30	Client	15.2.0 - Spara layout i Smartslide	JH
			Man kan spara layouten p� tabellerna i Smartslide.
128	2015-09-30	Client	15.2.0 - Visa beskrivning i maskin analys	JH
			�tg�rdat bugg som resulterade i att en eller flera extra staplar visades i rapporten maskinanalys d� man valt att visa beskrivning.
122	2015-09-30	Client	15.2.0 - SQL �versikt har st�d f�r ERP	JH
			Man kan nu skapa en egen SQL fr�ga som st�lls mot ERP databasen ist�llet.
126	2015-09-30	Client	15.2.0 - Interna aktiviteter	JH
			Man kan nu v�lja att starta Interna Aktiviteter som stand-alone.
132	2015-09-30	Scheduler	15.2.0 - Nya tidsintervall	JH
			F�ljande tidsintervall har lagts till f�r att underl�tta schemal�ggning och snabbval. F�reg�ende m�ndag, f�reg�ende tisdag, f�reg�ende onsdag, f�reg�ende torsdag, f�reg�ende fredag, f�reg�ende l�rdag, f�reg�ende s�ndag.
70	2015-09-30	Attention	15.2.0 - Ny attention-slide, smartslide	JB
			Numera finns det en ny Attention-slidetyp kallad SmartSlide tillg�nglig, som visar 1-6 graf(er) och/eller tabeller som baseras p� anv�ndardefinierad SQL.
78	2015-09-30	Client	15.2.0 - OPC Connector - Dela v�rdet med	JH
			I OPC Connector kan man nu v�lja att dela processv�rdet med ett tal INNAN det behandlas av programmet och eventuellt loggas.
79	2015-09-30	Client	15.2.0 - OPC Connector - Logga v�rdet f�r�ndring	JH
			I OPC Connector kan man nu v�lja att logga v�rdet direkt d� det �ndras ut�ver eventuell loggning vid tidpunkter.
88	2015-09-30	Scheduler	15.2.0 - Schemal�ggning utan Zon och Kategori	JH
			Ett problem som uppstod d� f�retag som inte hade Zon eller Kategori k�rde schemal�ggaren �r nu l�st.
89	2015-09-30	Client	15.2.0 - Administration av spr�k i eTouch	JH
			I Balthzar Admin intr�ffade det ibland att det valda spr�ket f�r eTouch parametrar inte laddades.
91	2015-09-30	Client	15.2.0 - Fler rapporter samtidigt	JH
			Balthzar kan nu visa flera rapporter samtidigt. Detta inneb�r att man l�ttare kan j�mf�ra tv� rapporter d� b�da kan visas samtidigt p� sk�rmen.
93	2015-09-30	Client	15.2.0 - Kassationsrapport totalt %	JH
			Kassationsrapporten har nu en stapel som visar hur stor andel av cykler/producerat antal som kasserats i urvalet.
92	2015-09-30	Client	15.2.0 - Administration l�ser inte Balthzar	JH
			N�r man �ppnar administrationsverktyget kan man nu �ven anv�nda Balthzar samtidigt.
94	2015-09-30	Client	15.2.0 - OPC Connector k�r endast en instans	JH
			OPC Connectorn kan endast k�ras som en instans per dator. Detta f�r att s�kerst�lla att data inte kan komma att behandlas dubbelt.
95	2015-09-30	Client	15.2.0 - OPC-Connector och processloggning	JH
			OPC-Connector f�rbereder nu de loggade OPC v�rdena s� att dessa kan unders�kas med hj�lp av rapporten Processloggning.
96	2015-09-30	Client	15.2.0 - Attention bilder i Klienten	JH
			I klienten kan man nu visa de bilder man f�rberett f�r Attention. Detta f�ruts�tter att man har minst en licens f�r attention.
98	2015-09-30	eTouch	15.2.0 - Visning av Smartslides	JB
			Smartslides kan numera visas separat i eTouch genom att aktivera specialfunktion 94, tillagt som standard i Client.
99	2015-09-30	eTouch	15.2.0 - R�ttning - Ej aktiva stopp i Dela stopp	JB
			Om funktionen Maskinunika stopporsaker anv�ndes, anv�ndes �ven dessa i Dela stopp-funktionen. D�r togs inte h�nsyn till om stopporsakerna var aktiva eller ej. Det g�rs nu.
105	2015-09-30	Ststus	15.2.0 - Epost vid viss stopporsak angiven	PL
			P� stopporsaker finns sedan tidigare m�jlighet att skicka epost vid viss stopporsak till en epostadress. Numera kan man skicka till flera adresser genom att dela mailadresser med ;
119	2015-09-30	eTouch	15.2.0 - Status p� manuella maskiner	JB
			En r�ttning har gjorts g�llande hur status p� manuella maskiner s�tts i systemet, som g�r att problem med statusuppdateringar i vissa l�gen f�rsvinner.
129	2015-08-25	Client	15.2.0 - Exportav processloggning	JH
			Rapporten Processloggning g�r nu att exportera till PDF eller excel (.xls och .xlsx).
120	2015-08-21	Scheduler	15.2.0 - Schemal�ggaren slutar fungera	JH
			�tg�rdat en bugg i schemal�ggaren som orsakade att den kunde sluta skicka rapporter.
109	2015-08-17	eTouch	15.2.0 - Felaktigt tillbakahopp fr�n okodade stopp	JB
			Under vissa f�ruts�ttningar kunde hoppet fr�n listan okodade stopp till Tillverkningsorderbilden d� sista stoppet kodades, missas att g�ras. Det �r nu r�ttat.
111	2015-08-17	eTouch	15.2.0 - Verklig cykeltid	JB
			Verklig cykeltid kunde tidigare ber�knas fel om platser anv�ndes. Det �r nu r�ttat.
54	2015-02-11	Client	15.2.0 - Aktiviteter borttaget	JH
			Menyvalet Aktiviteter i Balthzar Client �r borttaget. Detta beror p� att samma information kan skapas i �versikt maskin.
55	2015-02-11	Status	15.2.0 - Omber�kning av cykeltid	PL
			�ndring �r gjord s� att nollst�llning av orderns cykeltid g�r om maskinen stannat och sedan startar upp igen. Detta f�r att g�ra snittber�kningen mer korrekt.
53	2015-02-05	Client	15.2.0 - Admin - Egna SQL-fr�gor	JB
			I Admin finns fr�n och med version 3.0 R 0205 ett nytt formul�r d�r SQL-fr�gor kan hanteras, i menyn Grunddata. Dessa SQL-fr�gor kan senare knytas till de st�llen i klienten d�r anv�ndardefinierad data visas.
47	2015-01-19	Client	15.2.0 - Interna aktivteter	JH
			Hanteringen av interna aktiviteter har uppdaterats. Man kan nu titta p� interna aktiviteter f�r en enskild maskin eller f�r alla och sedan skapa ett eget filter. N�r man sedan utf�r en intern aktivitet har layouten uppdaterats f�r att b�ttre st�dja touch funktion. Interna aktiviteter �r en separat modul som kr�ver licens
50	2015-01-10	Client	15.2.0 - Villkorsstyrd formattering i �versikter	PL
			Ny funktion g�r att man i sina �versikter numera ocks� kan addera villkorsstyrd formattering. Tex kan v�rden visas med viss f�rg mm. H�gerklicka i en kolumn i en �versikt och v�lj "conditional formatting" och prova dig fram
49	2015-01-05	Client	15.2.0 - Bugg: Egen tabell �versikt
			Fixat bugg d�r man inte kunde �ndra layout, inst�llningar eller SQL fr�ga om tabellen var tom.
807	1900-01-01

1039	1900-01-01

.:: Delacroy IT-Konsult AB, 2020::.